rizoma LBJ400 Break Lever User Manual

June 9, 2024
rizoma

rizoma LBJ400 Break Lever

rizoma-LBJ400-Break-Lever-product-img

Product Information

The Rizoma product is a brake lever for motorcycles that comes with a safety ball at the end to prevent impalement in the event of a crash. It is important to read and follow the instructions provided in the user manual before installing and using the product. The user manual is an essential part of the product and contains general conditions, installation instructions, safety precautions, and maintenance guidelines. The product is designed to work with specific motorcycle models and may not be compatible with other aftermarket equipment previously installed on the motorcycle.

Product Usage Instructions

  1. Read and understand the user manual before installing and using the product.
  2. Contact an authorized Rizoma dealer if you have any doubts regarding the installation or use of the product.
  3. Ensure that all related components of the motorcycle function properly after installing the Rizoma product.
  4. Periodically check the Rizoma product for leaks, bends, deformations, cracks, chips, or wear. If any of these issues are present, immediately have a Rizoma dealer inspect the product before riding again.
  5. Never attempt to repair or modify the Rizoma product or its components. Always replace with Rizoma original components.
  6. Install the brake lever by following the instructions provided in the user manual.
  7. Check the completeness of the kit on the part list before starting the installation.
  8. Ensure that all tightening is done after the correct positioning of the accessories without restricting the moving parts.
  9. Repeat periodic checks, especially after long trips or prolonged periods of not using the motorcycle.

Overall, it is important to prioritize safety when using the Rizoma product. Always follow the instructions provided and contact an authorized Rizoma dealer if you have any doubts or concerns.

Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.

Attention

This component comes assembled for shipping purposes only. Tighten all fasteners to appropriate torque specifications before riding.

Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

  1. Carefully read, understand and follow these instructions, they are an essential part of the product. If you have any doubt whatsoever regarding the installation or use of
    your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).

  2. For correct installation, all tightening has to be done after the correct positioning of the accessories without restricting the moving parts, to not compromise the
    correct functioning of the product.

  3. After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly
    suggest repeating these checks periodically, especially after long trips or prolonged periods of not using the bike.

Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are
leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never
try to repair or modify the Rizoma products or their components, always replace with Rizoma original components. Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.

original equipment manufacturer

rizoma-LBJ400-Break-Lever-fig-1

Consult the website www.rizoma.com, in the Brake/Clutch levers “3D” section click “MEDIA” to download the PDF document approval ABE.

Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components.

Warning: Make sure that your motorbike is standing firmly before you start work, as a fall may lead to damage to the motorbike or injury to you or others.

WARNING: TO CLEAN YOUR PRODUCT DON’T USE DETERGENT, AGGRESSIVE PRODUCTS, OR ABRASIVE SPONGES THAT CAN DAMAGE OR SCRATCH YOUR PRODUCT, BUT USE ONLY NEUTRAL DETERGENT WITH COLD WATER.rizoma-LBJ400-Break-Lever-
fig-2

Improper installation of the lever could adversely affect the performance of the brakes or clutch, resulting in an accident, personal injury or death. Your lever is equipped with a safety ball at the end to prevent impalement in the event of a crash. Never ride if the lever is broken or otherwise damaged in any way. Immediately replace the lever.

rizoma-LBJ400-Break-Lever-fig-3

INSTALL THREAD SHAFT

STEP 1

WARNING: CHECK THE RIGHT OPERATION OF THE SWITCH.

rizoma-LBJ400-Break-Lever-fig-4

WARNING: USE THE HOLEI FOR BMW SIOOORR WITHOUT ABS.

STEP 2

rizoma-LBJ400-Break-Lever-fig-5

WARNING: BEFORE RIDING THE MOTORCYCLE CHECK THE CORRECT TIGHTENING OF THE SCREW.

STEP 3

rizoma-LBJ400-Break-Lever-fig-6

WARNING: FOR THE CORRECT INSTALLATION OF THE ADJUSTER TIGHTEN THE HEADLESS SCREW IN THE SHAFT HOUSING.

STEP 4

rizoma-LBJ400-Break-Lever-fig-7 WARNING: ROTATE THE ADJUSTER CLOCKWISE OR COUNTERCLOCKWISE TO MOVE THE BRAKE LEVER IN OR OUT.

STEP 5

rizoma-LBJ400-Break-Lever-fig-8

WARNING: AFTER THE ADJUSTMENT OF THE LEVER (BY ADJUSTER PEG) BEFORE RIDING THE MOTORCYCLE SIMULATE A HARD BRAKING AND COMPLETE THE HANDLEBAR TURN FROM RIGHT TO LEFT THE LEVER MUST DON’T TOUCH THE THROTTLE GRIP AND NO PARTS OF THE MOTORCYCLE.

STEP 6

rizoma-LBJ400-Break-Lever-fig-9

WARNING: TO CLEAN THE O-RING DON’T USE HYDROCARBONS.

RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury. The action depicted is performed by professionals under strictly controlled riding conditions. Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy. All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full-face helmet), that has been approved by ANSI, SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding styles, such as full-finger gloves, boots, and body armor. Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle. Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.

  • Some of our products may not be approved for road circulation in the countries where homologation is required.
  • Thus RIZOMA® srl declines any responsibility for a different use of its products.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

rizoma User Manuals

Related Manuals