Ardes AR5W40R, R5W40RW Wall Fan with Remote Control Instruction Manual
- June 9, 2024
- Ardes
Table of Contents
AR5W40R, R5W40RW Wall Fan with Remote Control
Product Information
The AR5W40R-AR5W40RW is a wall fan with remote control. It has a front and back grille, a motor body, a fan, and a control panel with buttons and a remote. The fan can be mounted on a wall using the mounting plate and screws provided in the installation kit. The fan has three modes of operation: normal, natural, and night mode. It also has a swing function that can be activated using the remote control. The fan’s head can be adjusted vertically to the desired angle.
Product Usage Instructions
- Before using the fan, read the instructions carefully and follow the safety guidelines.
- Assemble the fan completely before connecting it to the power supply.
- Mount the fan on a wall using the provided installation kit.
- Use the control panel or remote to turn on/off the fan, adjust its speed, set its mode, activate the swing function, or set the timer.
- Use the vertical adjustment feature to orient the fan’s head to the desired angle.
- For maintenance, clean the grilles and motor body regularly with a soft cloth. Do not use water or other liquids to clean the fan.
- For battery disposal, remove the batteries from the appliance and dispose of them in designated containers or collection centers.
Do not dispose of them in household waste.
WARNINGS
- Aappliance may be used by children 8 years of age and older and people with reduced physical, sensory or mental capacities or with a lack of experience and knowledge if they are adequately supervised or have been instructed on the safe use of the appliance and are aware of the related dangers.
- Children must not play with the appliance. Cleaning and maintenance must not be performed by children
- unless they are under supervision. Cleaning and maintenance operations must not be performed by children without supervision.
- If the power cable gets damaged, it has to be replaced only at a service center approved by the manufacturer in order to prevent any risks.
- Ensure that the fan is switched off from the supply mains before removing the guard.
- Don’t connect the appliance to the power supply and don’t use it unless it is completely assembled (see mounting instructions).
- ATTENTION : read this booklet carefully it contains important instructions for a safe installation, use and maintenance. Important instructions to be kept for future reference.
- It is forbidden for the children to play with the device.
- This device must be used only for the purpose it was expressly designed; any use not complying with the instructions contained in the manual is considered inappropriate and dangerous. The manufacturer is not responsible for possible damages caused by the inappropriate and/or unreasonable use.
- This device is NOT suitable to use it in an explosive environment (in the presence of flammable substances such as gas, vapor, mist or dust, in atmospheric conditions when, after ignition, the combustion is spread in the air).
- The packing materials (plastic bags, expanded polystyrene, etc.) must be kept out of the reach of children or disabled persons since they represent potential sources of danger.
- The installation/assembly of the device will be made/ or according to the indications of the manufacturer. A wrong procedure may cause damages to persons, animals or objects, for which the manufacturer cannot be considered responsible.
- Place and use the device on a horizontal and stable surface.
- Before use check the integrity of the device and power cable. In case you are not sure contact a qualified person.
- Before powering the device make sure the rating (voltage and frequency) corresponds to the grid and the socket is suitable for the plug of the device.
- Make sure the power system is equipped with proper protection according to the law in force DO NOT power the device using multiple sockets.
- If possible, avoid the use of adapters and/or extension cables; if their use is absolutely necessary, use only materials in compliance with the current safety regulations and according to the electrical parameters of the adapters.
- The device must not be switched on using external timers and/or other remote control devices which are not specified in this manual.
- DO NOT use or store the device near heat sources (heaters, stoves etc.). DO NOT dip the device in water or other liquids; in case the accidental fall in the water DO NOT try to take it out, but first of all unplug immediately the power cable from the socket.
- If you use the device for the first time, make sure to remove any label or protective sheet which blocks its proper functioning.
- Plug and unplug the power cable with dry hands and hold it firmly. Before plugging make sure the start button of the device is in the “OFF” position (turned off).
- Always unplug the power cable to avoid the overheating and avoid stretching it (do not pull it, tug it or use it to drag the device to which is connected).
- Avoid placing the power cable on abrasive or sharp surfaces or in positions where it can be damaged easily.
- DO NOT obstruct totally nor partially the air vents or inserts objects inside.
- During the functioning do not touch the device with wet body parts, and in any case it is recommended to have between you and the standing surface, an isolating element (for example wearing
- shoes with rubber soles).
- During the use the device must be keep at a safety distance from any object and/or flammable or potentially explosive substance.
- In case of malfunction or anomalies during the functioning, switch off the device immediately, turn off the power and check the cause of the anomalies, if possible, with the support of a qualified person. Avoid carrying out operations which are not specified in this manual (such as disassembling and/or altering).
- Always remember to unplug the power cable of the device if it is not used for a long period, before storing, cleaning or performing any maintenanceoperation.
- Store and use the device only indoor or in any case protected from weathering such as rain, direct radiation of the sun and dust. The device is not design for the external use or storage.
- The cleaning and maintenance of the device MUST NOT be done by children without the supervision of an adult.
- Before unplugging the device, switch it off, using the proper command on the control panel.
- DO NOT hang the fan on the wall or ceiling unless this type of installation is provided and explained in this manual.
- Place the device at a proper distance from the objects or surrounding walls making sure that its functioning will not cause accidental damages. DO NOT use the device near gas stoves or open flames in general. DO NOT use the device near curtains or textiles.
- DO NOT hang the fan on the wall or ceiling unless this type of installation is provided and explained in this manual.
- DO NOT cover the device during functioning.
- DO NOT insert objects or body parts inside the protection grille of the fan. DO NOT leave the device unsupervised for a long period during functioning.
- DO NOT expose yourself for a long period to the air flow generated by the device because it can cause damage to the health.
- If the fan must be stored for a long period and is not used regularly, place the fan in its original packaging in a dry place. When you use it for the first time after a long period of inactivity, make sure the fan is clean and the motor blades turn feely (with the device not powered) without any restraint.
WARNINGS ABOUT BATTERIES
- KEEP BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.
- Do not allow children to replace batteries.
- Always insert batteries correctly with regard to polarity (+ and -) marked on the battery and the equipment.
- Do not short-circuit batteries.
- Do not charge batteries.
- Do not force discharge batteries.
- Do not mix new and used batteries or batteries of different types or brands.
- Exhausted batteries should be immediately removed from equipment and properly disposed of.
- Do not heat batteries
- Do not weld or solder directly to batteries.
- Do not dismantle batteries.
- Do not deform batteries.
- Do not dispose of batteries in fire.
- A lithium battery with a damaged container should not be exposed to water.
- Do not encapsulate and/or modify batteries.
- Store unused batteries in their original packaging away from metal objects. If already unpacked, do not mix or jumble batteries.
- Remove batteries from equipment if it is not to be used for an extended period of time unless it is for emergency purposes.
- Clean the battery contacts and also those of the equipment prior to battery installation.
- In case of leak from batteries, avoid any contact with it; in case of contact, wash the affected part with water and seek medical attention.
Technical information’s
-
Safety screw
-
Front grille
-
Lock ring of the fan
-
Fan
-
Lock ring of the back grille
-
Back grille
-
Motor shaft
-
Motor
-
Fixing plate
-
Control panel
Wall installation kit:
-
Fixing plate to the wall
-
Screws and plugs
Instructions for use
Unscrew the lock ring of the back grille (5) from the motor shaft (7) by
turning counter clockwise. Insert the back grille (6) on the motor shaft (7)
and fix it by screwing clockwise the lock ring of the back grille (5). Insert
the fan (4) on the motor shaft (7) and fix it by screwing counter clockwise
the lock ring of the fan (3). Open the clips of the front grid the fan on the
wall’s plate (11) making sure that the flap fits into the fixing plate (9) on
the back of the faille (2) and place it on the back grille (6) making sure
that the logo on the central stud is placed horizontally, parallel with the
floor. Find the proper position to lock the clips and insert the safety screw
of the grille (1).
Wal l installation:
Fix the plate to the wall (11) by using the 3 screws and plugs provided (12).
Fix the fan on the wall’s plate (11) making sure that the flap
fits into the fixing plate (9) on the back of the fan.
After the installation, the product is ready to use. For your convenience the unit can be operated by using control panel in the main body or using remote control included.
Buttons
- A. Off
- B. On/Speed
- C. Mode
- D. Timer
- E. Swing
Batteries
Remote control is supplied without batteries; before use remote control open
the batteries holder placed on the back of remote control and insert 2
batteries LR03 1,5V AAA.
To remove batteries, open the batteries holder placed on the back of the
remote control, by sliding the cover to the outwards.
OFF Button (A):
Press this button when the unit is on, to turn it off.
ON/SPEED Button (B):
Press this button when the unit is off to turn it on.
Press this button when unit is on to select the desired speed: low speed
(“LOW” indicator light”), medium speed (“MED” indicator light) or high speed
(“HIG” indicator light).
MODE Button (C):
Press this button when unit is on to select the desired mode: normal (“NOR”
indicator light), natural (“NAT” indicator light) or sleeping mode (“SLP”
indicator light).
TIMER Button (D):
When the unit is operating, you can set the timer to switch the fan off
automatically after the set time. Press this button repeatedly to select the
desired time period in half hours increments from 0,5 hours to 7,5 hours. The
related indicator light (0,5H, 1H, 2H, 4H) will illuminate on the control
panel. When all the indicators light are off means that timer is not settled
and the unit will continuously work until you switch off manually the unit.
SWING Button (E):
Press this button when unit is on to activate the automatic oscillation from
left to right. To deactivate the automatic oscillation press again this
button.
VERTICAL SLOPE:
You can vertically point the front of the fan choosing the desired angle. It
is sufficient to move the front of the fan up or down according to the desired
slope.
MAINTENANCE
Before carrying out the regular cleaning operations turn off the fan and
unplug it.
For external cleaning use a soft and dry cloth.
DO NOT disassemble the fan: this fan cannot be disassembled.
DO NOT dip the device in water, or splash it with any other liquids. DO NOT
use solvents or any other chemical products for cleaning it. When you do not
use it, after cleaning it, store the fan in a dry place.
User Information
PACKAGING
In order to respect the environment, packaging material must be disposed of
properly in accordance with separate collection.
Check local regulations.
BATTERIES – Remove the batteries from the appliance before its disposal.
Do not dispose the batteries with domestic waste. The batteries must be
disposed of in the appropriate containers or in the specific collecting
center. Suitable segregated collection helps prevent damage to the environment
and to human health.
To remove batteries, refer to Instructions for use.
USER INFORMATION
****“Implementation of Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE)”, pertaining to reduced use of hazardous
substances in electrical and electronic equipment, as well as to waste
disposal.
The symbol of the crossed-out wheelie bin on the equipment or on its packaging
indicates that the product must be disposed of separately from other waste at
the end of its service life.
The user must therefore take the dismissed equipment to suitable separate
collection centres for electrical and electronic waste.
For more details, please contact the appropriate local authority. Suitable
segregated collection of the equipment for subsequent recycling, treatment or
environmentally- friendly disposal helps prevent damage to the environment and
to human health, and encourages the re-use and/or recycling of the materials
that make up the equipment.
Abusive disposal of the product by the user shall result in the application of
administrative fines in accordance with the laws in force.
GUARANTEE
Terms and Conditions
The guarantee is valid for 24 months.
This guarantee applies only if it has been duly filled in and is submitted
with the receipt showing the date of purchase.
The guarantee covers the replacement or repair of parts making up the
appliance which were faulty at source due to manufacturing faults.
After the guarantee has expired, the appliance will be repaired against
payment. The manufacturer declines any responsibility for damage to persons,
animals or property due to misuse of the appliance and failure to observe the
directions contained in the instructions.
Limits
All rights under this guarantee and any responsibility on our part will be
voided if the appliance has been:
- mishandled by unauthorized persons
- improperly used, stored or transported.
The guarantee does not cover damage to the outward appearance or any other
that does not prevent regular operation.
If any faults should be found despite the care taken in selecting the
materials and in creating the product, or if any information or advice are
required, please contact your local dealer.
Poly Pool S.p.A. Via Sottocorna, 21/B
24020 Parre (Bergamo) – Italy
Tel. +39 035 4104000 r.a. – Fax +39 035 702716
http://www.ardes.it – e-mail:
polypool@polypool.it
MADE IN CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>