MACHENIKE L8 Pro Gaming Mice User Guide

MACHENIKE L8 Pro Gaming Mice

Product Information

Specifications:

• Model: L8 Pro 2K Edition
• Wired Mode Polling Rate: 8000Hz
• 2.4GHz Mode Polling Rate: 2000Hz
• Bluetooth Mode Polling Rate: 125Hz

Product Usage Instructions

Layout
The L8 Pro mouse has the following buttons and features:

• Right Button
• Wheel Click
• Left Button
• DPI Cycle/DPI
• Scroll Mode Button
• Back Button
• Forward Button
• Slider Switch (for switching between wireless 2.4GHz mode, 2.4G wired mode, and Bluetooth mode)
• Dongle Storage
• RGB Adjusting Button /RGB
• USB Port/USB (for connecting the charging dock)

Installation & Function

Connection

To connect the mouse to your computer, follow these steps:

1. In wireless mode : Slide the slider switch to the desired wireless mode (2.4GHz or Bluetooth). The scroll wheel light will indicate the mode.
2. In wired mode: Connect the mouse to your computer using the USB cable.

Via 2.4GHz Wireless Mode

1. Push the slider switch to 2.4GHz Mode (The mouse will power on and the scroll wheel and the top cover lights will stay in RGB flow mode for 2 seconds as a power-on indicator. )
2. Plug the wireless USB Dongle into you PC or plug into the Charging Dock. (Already Connected to PC). USB Dongle and mouse distance controlled within 20CM.
3. Indicator for DPI Values Corresponding to CPI Button Press:
   800 DPI (Red) – 1600 DPI (Color) – 2400 DPI (Blue – Default Value) – 3200 DPI (Yellow) ‒ 6400 DPI (Pink) – 26000 DPI (Orange)

Via Wired Mode

1. Push the slider switch to wired mode .
2. Connect the mouse to any of your PC’S USB ports using the charging cable to use it in wire d mode. (Power-On Indicator Light Same as 2.4G Mode)

Via Bluetooth Mode

1. Push the slider switch to Bluetooth mode .
2. Pairing with the Desired Device. (Power-On Indicator Light Same as 2.4G Mode

Paring Mode

The mouse will automatically enter pairing mode when you switch to Bluetooth mode. The scroll wheel light will blink in blue to indicate pairing mode.

A.2.4GHz Wireless Mode

1. Push the slider switch to 2.4GHz Mode.
2. Press and hold the scroll wheel + Left Button + Right Button simultaneously for 3 seconds to activate paring mode . The scroll wheel light will blink yellow(3 times in 1s) , continuous blinking for 1 minute.
3. Plug the wireless USB Dongle into you PC or plug into the Charging Dock.
4. Wait until the mouse pairs with your device. The scroll wheel light will turn to regular lighting effect mode when paired.

Bluetooth Mode

1. Push the slider switch to Bluetooth mode .
2. Press and hold the scroll wheel + Left Button + Right Button simultaneously for 3 seconds to activate paring mode . The scroll wheel light will blink blue(3 times in 1s) , continuous blinking for 3 minutes.
3. Wait until the mouse pairs with your device. The scroll wheel light will turn to regular lighting effect mode when paired.

Mouse Reconnection
If the mouse gets disconnected, follow these steps to reconnect:

1. In wireless mode: Press any button on the mouse to wake it up and establish the connection.
2. In Bluetooth mode: If the mouse doesn’t automatically reconnect, go to your computer’s Bluetooth settings and select the mouse to establish the connection.
3. 2.4G Wireless Mode: Scroll Wheel Light Slow Yellow Blinking (1 time per 1 second) as Indicator.
4. Bluetooth Mode: Scroll Wheel Light Slow Blue Blinking (1 time per 1 second) as Indicator.

Lighting Mode
To control the RGB lighting modes and colors of the mouse, use the following combinations

• Combination key (Scroll Wheel + Back Button): Control lighting modes
• Combination key (Scroll Wheel + Forward Button): Adjust lighting colors

Mouse RGB Light Effect Control Mode: Combination key (Scroll Wheel + Back Button) to control lighting modes, combination key (Scroll Wheel + Forward Button) to adjust lighting colors. For more advanced settings and customization options, download the MACHENIKE L8 Pro Dual-Mode Mouse Driver from https://global.machenike.com/.

Polling Rate
The polling rate determines how often the mouse reports its position to the computer.

• 2.4GHz Mode : Default polling rate of 2000Hz; adjustable in the driver software to 125-250-500-1000-2000Hz.
• Wired Mode: Default polling rate of 1000Hz; adjustable in the driver software to 1000-2000-4000-8000Hz.
• Bluetooth Mode: Default polling rate of 125, not adjustable

The default polling rates and adjustment options are as follows:

• 2.4GHz Mode: Default polling rate of 2000Hz; adjustable in the driver software to 125-250-500-1000-2000Hz.
• Wired Mode : Default polling rate of 1000Hz; adjustable in the driver software to 1000-2000-4000-8000Hz.
• Bluetooth Mode : Default polling rate of 125Hz; not adjustable.

Cursor Movement Power Saving
In 2.4GHz wireless and Bluetooth modes, the RGB lights (except for the scroll wheel) will turn off to save power when the cursor is being moved by the mouse. The lights will resume when the cursor stops moving.

Hyperscroll Wheel
The top scroll mode button can be pressed to switch between TACTILE CYCLING MODE and FREE-SPIN SCROLLING MODE.

Charging Dock Usage
To use the charging dock with the mouse, follow these steps:

1. Wireless Connection: Connect the charging dock to your PC and insert the USB dongle into the USB port at the front of the charging dock to connect in 2.4GHz mode.
2. Charging: Align the charging contacts on the bottom of the mouse with the contacts on the charging dock. Place the mouse on the charging dock to enter charging mode.
3. Light Adjustment: Press the button at the bottom of the charging dock to switch the dock’s light color.

Sleep Mode
In 2.4GHz wireless and Bluetooth modes, the mouse enters sleep mode (all LED lights turn off) after 3 minutes of inactivity, entering a light sleep mode. It automatically wakes up upon movement. After 30 minutes, it enters deep sleep. Pressing any button will wake it up. There is no sleep function in wired mode.

Low Battery Shutdown
When the mouse’s battery voltage is below 3.5V, the RGB lighting effect remains fixed on a red breathing light, and all three blue battery indicator lights blink once per second as an indication. When the voltage drops below 3.2V, the mouse will automatically shut down.

TECH SPECS

TROUBLE SHOOTING

• Mouse Movement or Clicking Not Responding:
  It may be due to the USB interface not being connected to the computer. Please ensure that the mouse is properly connected to the computer.

• Mouse Movement Too Slow or Too Fast:
  It may be due to DPI settings not matching personal preference. Adjust DPI to suit personal preference.

• For any unresolved issues, please do not attempt to disassemble the mouse. Contact the seller for assistance.

• If the charging cable or adapter is lost, please contact the seller to purchase a replacement.

PACKING CONTENTS
Mouse, USB Dongle, Charging Dock, Data Cable, User Manual, Mouse Grip Tapes

GLOBAL

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF waring for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FAQ

Mouse Movement or Clicking Not Responding
Possible Solution: Ensure that the USB interface is properly connected to the computer.

Mouse Movement Too Slow or Too Fast
Possible Solution: Adjust the DPI settings to match your personal preference.

Unresolved Issues
If you encounter any unresolved issues, please do not attempt to disassemble the mouse. Contact the seller for assistance.

Lost Charging Cable or Adapter
If you have lost the charging cable or adapter, please contact the seller to purchase a replacement.

References

• Machenike Official Website | As Cool As You Are – Machenike Official Store

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>