DELL P149G001 Latitude 7330 Rugged Extreme Laptop User Guide
- June 4, 2024
- Dell
Table of Contents
**
**
DELL P149G001 Latitude 7330 Rugged Extreme Laptop
Regulatory Model/Type
- P149G/P149G001
MCMC certification mark
Windows
In Windows Search, type System. In the search results, click System.
Ubuntu
On the desktop, click → About This Computer.
PT Dell Indonesia Menara BCA Lantai 48 Unit 4804 Jalan M.H Thamrin No. 1 Jakarta Pusat, 10310 Indonesia
Connection and use of this communications equipment is permitted by the Nigerian Communications Commission.
WARNING
- Read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at Dell.com/regulatory_compliance.
- Do not remove the computer cover unless you need to install internal accessories for your computer. For instructions on removing and replacing parts, see the Owners or Service Manual at Dell.com/support.
- Retain the filler brackets or cards that ship with your computer. Installing filler brackets or filler cards over empty card-slot openings is necessary to maintain FCC certification of the computer. The filler brackets and filler cards keep dust and dirt out of your computer and maintain the airflow that cools your computer.
Power Adapter
| Input voltage | 100-240 V AC |
|---|---|
| Input current (maximum) | 1.5 A |
| Input frequency | 50-60 Hz |
| Output current | 3.25/ 4.5A |
| Output voltage | 20V DC |
| Maximum operating temperature | 35°C ( °F) |
Connect the power adapter or the power cable to your computer and to the
display, if required.|
Power on the computer (and the display, if connected).|
Depending on your computer configuration, some ports or connectors may not be
available.|
Icons
Power adapter|
---|---
USB 2.0|
USB 3.0/USB 3.1 Gen 1|
USB 3.0/USB 3.1 with PowerShare| 
USB 3.1 Type-C|
eSATA|
Thunderbolt|
Thunderbolt 3 port with Power delivery (USB-C)|
Network|
---|---
VGA| 
DVI|
HDMI|
DisplayPort|
Mini DisplayPort|
TV-in|
External Graphics Port|
Infrared (IR) emitter|
Headphone/Audio-out|
Headset|
Microphone| 
---|---
Line-in|
Line-out/Speakers: front left-right|
Speakers: rear left-right|
Speakers: side left-right|
Speakers: Audio center/subwoofer|
S/PDIF|
Screen-rotation lock|
---|---
SIM-card slot|
ExpressCard slot|
Media-card reader| 
Security-cable slot|
Power/Battery-status light| 
Battery-status light|
Hard-drive activity light|
Wi-Fi light|
---|---
Bluetooth light|
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. The exposure standard for wireless device
employs a unit of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is l.6W/kg. *Tests for SAR are conducted using
standard operating positions accepted by the FCC with the device transmitting
at its highest certified power level in all tested frequency bands.
Prohibited for control of or communications with unmanned aircraft systems,
including drones.
Industry Canada statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.
Radiation Exposure Statement:
The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>