Elvita CTK3170X Tea kettle User Manual
- June 5, 2024
- ELVITA
Table of Contents
Elvita CTK3170X Tea kettle
ELVITA ELECTRIC KETTLE
Read through this user manual carefully before using the electric kettle. Save the manual for later reference, to avoid incorrect use or injury. In this manual, the electric kettle will also be referred to as “the appliance”.
READ ALL INSTRUCTIONS
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replacedby the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
- Keep the appliance and its cord out of reach of children aged less than 8 years.
- Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
- Children shall not play with the appliance.
- Symbol IEC 60417-5041 (222-10) Caution: hot surface are liable to get hot during use.
- This appliance is for household and indoor use only.
- The appliance must not be immersed.
- If the kettle is overfilled, boiling water may be ejected.
- Appliance is only to be used with the stand provided.
- Warning! avoid spillage on the connector.
- Warning! the heating element surface is subject to residual heat after use.
WARNING: Do not remove the lid while the water is boiling.
CAUTION: Position the lid so that steam is directed away from the handle.
CAUTION: Insure that the appliance is switched off before removing it
from its stand.
Button function:
- “40°C”: The temperature setting is 40°C after pressing this button.
- “70°C”: The temperature setting is 70°C after pressing this button.
- “85°C”: The temperature setting is 85°C after pressing this button.
- “100°C”: The water will be heated up to boiling after pressing this button.
- “START/STOP”: Start/shut off the unit.
- “KEEP WARM”: Start or stop the KEEP warm.
Button display
Description of operation
Preparation: place the kettle on a flat and level table and plugin
accordingly. Fill the kettle with enough water (the water level must not be
lower than the MIN mark or higher than the MAX mark). The appliance will carry
out a self-check routine and give an audible signal. It will then go into
standby mode. Standby mode: press one of the buttons to set the temperature.
Then press the “START/STOP” to start heating. The appliance will give an
audible alarm when it has reached the set temperature and will enter standby
mode automatically. When you press “START/STOP” in standby mode the appliance
will heat the water to the last temperature setting you selected. If the unit
is unplugged and then plugged back in, it will enter standby mode. If you
press “START/STOP” now, the default temperature setting will be 100°C (Boil).
Press “KEEP WARM” in standby mode to start the keep warm function. Press “KEEP
WARM” again to shut off. When the appliance is in KEEP WARM mode you can press
“START/STOP” to start heating. When it reaches the set temperature, the
appliance will enter KEEP WARM mode automatically.
When the appliance is set at 100°C (Boil), the KEEP WARM function cannot be chosen.
- When the appliance is set at 100°C (Boil), the KEEP WARM button is disabled.
- If 100°C has already been selected in standby mode, the KEEP WARM function can be started by pressing KEEP WARM and resetting the temperature to 85°C at the same time.
- If the KEEP WARM function is operating in standby mode you can turn it off by pressing 100°C (Boil).
While the appliance is working: You can press the temperature buttons to set the temperature; You can press the “KEEP WARM” button to start or stop the KEEP WARM function; You can press the “START/STOP” button to start or turn off the appliance. If the KEEP WARM function is set, and it will keep warm for 2 hours. The appliance will then turn off and enter standby mode automatically. The light around the base will come on during heating, and it will turn off after heating.
Boil-dry protection with auto safety shut off
If there is no water in kettle, the appliance will enter self-protection mode.
Product alarm
- If pressing the buttons does not have any effect, the indicator lights are turned off, or the kettle gives two audible alarms when it is plugged in, this means that the kettle has poor contact with the base. If you place the kettle correctly on the base, everything will return to normal again after plugging in.
- If the kettle beeps continuously and all the indicator lights flicker it means that the kettle has boiled dry and overheated. If this happens, unplug the kettle immediately and fill with cold water to cool it down.
- If the indicator lights flicker continuously, there is no audible alarm and none of the buttons work, this means there is a problem with the temperature sensor. Unplug the kettle and plug it back in again. If the problem persists, stop using the kettle and return it to the retailer for repair.
WARNING Electric Shock Hazard
Do not immerse the kettle, power base, or plug in water or any other liquid.
- With the kettle unplugged, empty any remaining water and rinse. Allow the kettle to cool. The mesh filter may be removed by pulling up on the filter tab which is visible through the kettle opening. To replace the filter, line it up with the tab on the inside of the kettle and slide down until it snaps into place.
- To avoid the build-up of scale or lime deposits, empty the kettle after each use. To remove discoloration or scale/lime deposits from the heating element: Place 1/2 teaspoon (2.5 ml) cream of tartar (available in the spice aisle of grocery store) into the kettle. Then fill the kettle 1/2 full with water. Plugin the kettle, press the START/STOP button, and bring to the boil. Press the STOP button. Unplug and allow to cool. Rinse several times with clean tap water.
- Wipe the exterior of the kettle with a damp cloth. Do not use abrasive scouring pads or powders since they may scratch the smooth surface of the kettle.
TECHNICAL INFORMATION
Model: CTK3170X
Voltage: 230 V
Frequency: 50/60 Hz
Power: 2000 W
Volume: 1.7 litres
PRODUCT DISPOSAL
This product must not be disposed of together with domestic waste. This
product must be disposed of at an authorized site for recycling electrical and
electronic appliances. By collecting and recycling waste, you help save
natural resources, and make sure the product is disposed of in an
environmentally friendly and healthy way.