Ardes AR5T801 Tower Fan Instruction Manual
- June 9, 2024
- Ardes
Table of Contents
AR5T801 Tower Fan
Product Information
The Tower Fan (AR5T801) is an electrical appliance designed to provide cool air in a straight and upright position. It has a control panel, air outlet, base, timer knob, speed/swing/off knob, and handle. The device can be assembled easily and must be connected to the mains supply only after it is fully assembled. It can be operated for up to 120 minutes with the timer function and has low, middle, and high-speed settings with or without oscillation. The device must not be used without a fixed base and may not be used in a horizontal position. It should be cleaned regularly using a soft and dry cloth and stored in a dry place.
Product Usage
- Before assembling the fan, make sure it is switched off and disconnected from the mains supply.
- To assemble the fan, unscrew the nut from the bottom of the fan unit, guide the cable through the centre of the two base plates, push the two plates together, place the fan unit on top of the base, secure the base with the nut, and guide the cable tightly through the groove in the outer rim of the base.
- Check that all parts are correctly and firmly connected before connecting the device to the mains supply.
- Insert the plug of the fan into a suitable socket outlet.
- Set the speed/oscillation using the knob as follows:
- = off
- = low speed
- = middle speed
- = high speed
- = low speed with oscillation
- = middle speed with oscillation
- = high speed with oscillation
- Set the operating time up to 120 minutes with the timer function by turning the timer clockwise to the desired time. The unit will start when the desired speed is selected. When the set time has elapsed, the device will switch off automatically. If you want to turn off the product before the set time has expired, turn the speed knob to the off position. Note that if the timer is set in the off position, the speed knob will not operate.
- Before unplugging the product, make sure it is turned off.
- To clean the fan, turn it off and unplug it. Use a soft and dry cloth for external cleaning. Do not disassemble the fan or dip it in water or splash it with any other liquids. Do not use solvents or any other chemical products for cleaning it. After cleaning, store the fan in a dry place.
WARNINGS
-
This appliance may be used by children 8 years of age and older and people with reduced physical, sensory or mental capacities or with a lack of experience and knowledge if they are adequately supervised or have been instructed on the safe use of the appliance and are aware of the related dangers.
-
Children must not play with the appliance. Cleaning and maintenance must not be performed by children
unless they are under supervision. Cleaning and maintenance operations must not be performed by children without supervision. -
If the power cable gets damaged, it has to be replaced only at a service center approved by the manufacturer in order to prevent any risks.
-
Ensure that the fan is switched off from the supply mains before removing the guard.
-
Don’t connect the appliance to the power supply and don’t use it unless it is completely assembled (see mounting instructions).
ATTENTION :
-
Read this booklet carefully it contains important instructions for a safe installation, use and maintenance. Important instructions to be kept for future reference.
-
It is forbidden for the children to play with the device.
-
This device must be used only for the purpose it was expressly designed; any use not complying with the instructions contained in the manual is considered inappropriate and dangerous. The manufacturer is not responsible for possible damages caused by the inappropriate and/or unreasonable use.
-
This device is NOT suitable to use it in an explosive environment (in the presence of flammable substances such as gas, vapor, mist or dust, in atmospheric conditions when, after ignition, the combustion is spread in the air).
-
The packing materials (plastic bags, expanded polystyrene, etc.) must be kept out of the reach of children or disabled persons since they represent potential sources of danger.
-
The installation/assembly of the device will be made/ or according to the indications of the manufacturer. A wrong procedure may cause damages to persons, animals or objects, for which the manufacturer cannot be considered responsible.
-
Place and use the device on a horizontal and stable surface.
-
Before use check the integrity of the device and power cable. In case you are not sure contact a qualified person.
-
Before powering the device make sure the rating (voltage and frequency) corresponds to the grid and the socket is suitable for the plug of the device.
-
Make sure the power system is equipped with proper protection according to the law in force DO NOT power the device using multiple sockets.
-
If possible, avoid the use of adapters and/or extension cables; if their use is absolutely necessary, use only materials in compliance with the current safety regulations and according to the electrical parameters of the adapters.
-
The device must not be switched on using external timers and/or other remote control devices which are not specified in this manual.
-
DO NOT use or store the device near heat sources (heaters, stoves etc.). DO NOT dip the device in water or other liquids; in case the accidental fall in the water DO NOT try to take it out, but first of all unplug immediately the power cable from the socket.
-
If you use the device for the first time, make sure to remove any label or protective sheet which blocks its proper functioning.
-
Plug and unplug the power cable with dry hands and hold it firmly. Before plugging make sure the start button of the device is in the “OFF” position (turned off).
-
Always unplug the power cable to avoid the overheating and avoid stretching it (do not pull it, tug it or use it to drag the device to which is connected).
-
Avoid placing the power cable on abrasive or sharp surfaces or in positions where it can be damaged easily.
-
DO NOT obstruct totally nor partially the air vents or inserts objects inside.
-
During the functioning do not touch the device with wet body parts, and in any case it is recommended to have between you and the standing surface, an isolating element (for example wearing shoes with rubber soles).
-
During the use the device must be keep at a safety distance from any object and/or flammable or potentially explosive substance.
-
In case of malfunction or anomalies during the functioning, switch off the device immediately, turn off the power and check the cause of the anomalies, if possible, with the support of a qualified person. Avoid carrying out operations which are not specified in this manual (such as disassembling and/or altering).
-
Always remember to unplug the power cable of the device if it is not used for a long period, before storing, cleaning or performing any maintenance
operation. -
Store and use the device only indoor or in any case protected from weathering such as rain, direct radiation of the sun and dust. The device is not design for the external use or storage.
-
The cleaning and maintenance of the device MUST NOT be done by children without the supervision of an adult.
-
Before unplugging the device, switch it off, using the proper command on the control panel.
-
DO NOT hang the fan on the wall or ceiling unless this type of installation is provided and explained in this manual.
-
Place the device at a proper distance from the objects or surrounding walls making sure that its functioning will not cause accidental damages.
-
DO NOT use the device near gas stoves or open flames in general. DO NOT use the device near curtains or textiles.
-
DO NOT hang the fan on the wall or ceiling unless this type of installation is provided and explained in this manual.
-
DO NOT cover the device during functioning.
-
DO NOT insert objects or body parts inside the protection grille of the fan. DO NOT leave the device unsupervised for a long period during functioning.
-
DO NOT expose yourself for a long period to the air flow generated by the device because it can cause damage to the health.
-
If the fan must be stored for a long period and is not used regularly, place the fan in its original packaging in a dry place. When you use it for the first time after a long period of inactivity, make sure the fan is clean and the motor blades turn feely (with the device not powered) without any restraint.
WARNING: this appliance can be supplied only by a supply mains provided of an efficient earthing system.
TECHNICAL INFORMATIONS
- Control panel
- Air outlet
- Base
- Timer knob
- Speed / Swing / Off knob
- Handle
INSTRUCTIONS FOR USE
Assembly.
Caution! The fan should always be switched off and does not connected to the
mains supply, if you mounting the fan.
- Unscrew the nut from the bottom of the fan unit (picture number 1)
- Place the fan unit on top of the base (picture number 3). – Guide the cable through the center of the two base plasters then push the two plates together (picture number 2).
- Secure the base with the nut (picture number 4) and guide the cable tightly through the groove in the outer rim of the base (picture number 5).
Pay attention that all the parts are correct
and firmly connected with each other.
Caution! Connect to the mains supply only after the fan has been fully
assembled.
- The fan must not be used without a fixed base
- The device may be operated only in straight and upright position
- This device may not be used in a horizontal position
Before plug the product check if it is switched Off. Insert the plug of the fan into a suitable socket outlet.
Set the speed/oscillation using the knob as below:
The operating time can be set up to 120 minutes with this function:
- Turn the timer clockwise to desired time. The unit will start when the desired speed is selected.
- When the set time has elapsed, the device switch Off automatically
- When not using the timer or you want turn off the product before the set time has expired, you can switch off by turning the speed knob in Off position.
Attention: if the timer is set in Off position, the speed knob does not
operate.
Attention: before unplug the product, be sure that product is turn Off.
MAINTENANCE
Before carrying out the regular cleaning operations turn off the fan and
unplug it.
For external cleaning use a soft and dry cloth.
DO NOT disassemble the fan: this fan cannot be disassembled.
DO NOT dip the device in water, or splash it with any other liquids. DO NOT
use solvents or any other chemical products for cleaning it. When you do not
use it, after cleaning it, store the fan in a dry place.
GUARANTEE
Terms and Conditions
The guarantee is valid for 24 months.
This guarantee applies only if it has been duly filled in and is submitted
with the receipt showing the date of purchase.
The guarantee covers the replacement or repair of parts making up the
appliance which were faulty at source due to manufacturing faults.
After the guarantee has expired, the appliance will be repaired against
payment. The manufacturer declines any responsibility for damage to persons,
animals or property due to misuse of the appliance and failure to observe the
directions contained in the instructions.
Limits
All rights under this guarantee and any responsibility on our part will be
voided if the appliance has been:
- mishandled by unauthorized persons
- improperly used, stored or transported.
The guarantee does not cover damage to the outward appearance or any other
that does not prevent regular operation.
If any faults should be found despite the care taken in selecting the
materials and in creating the product, or if any information or advice are
required, please contact your local dealer.
DISPOSAL
USER INFORMATION
“Implementation of Directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE)”, pertaining to reduced use of hazardous substances in
electrical and electronic equipment, as well as to waste disposal.
The symbol of the crossed-out wheelie bin on the equipment or on its packaging
indicates that the product must be disposed of separately from other waste at
the end of its service life.
The user must therefore take the dismissed equipment to suitable separate
collection centres for electrical and electronic waste.
For more details, please contact the appropriate local authority.
Suitable segregated collection of the equipment for subsequent recycling,
treatment or environmentally-friendly disposal helps prevent damage to the
environment and to human health, and encourages the re-use and/or recycling of
the materials that make up the equipment.
Abusive disposal of the product by the user shall result in the application of
administrative fines in accordance with the laws in force.
Poly Pool S.p.A. Via Sottocorna, 21/B
24020 Parre (Bergamo) Italy
Tel. +39 035 4104000 r.a.
Fax +39 035 702716
http://www.ardes.it
E-mail: polypool@polypool.it
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>