Kuzco Lighting FM355317UBGO Flush Mount Wynwood Instruction Manual
- June 13, 2024
- Kuzco Lighting
Table of Contents
Kuzco Lighting FM355317UBGO Flush Mount Wynwood
Product Information
- Product Model: FM355317
- Product Type: Flush Mount
Warnings and Cautions
Please read and follow all warnings and cautions provided in the user manual
to ensure safe installation and usage of the product.
Assembly Instructions
- Remove the fixture from its original package.
- Separate the mounting plate (1c) from the canopy (2a) by removing the decorative nut (2b).
- Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws provided (1e) in the hardware package.
- Make proper electrical connections by using wire nuts (1b) provided in the hardware package:
- Connect the black wire to the hot L.
- Connect white wire to neutral N.
- Connect the ground wire to GND.
- Attach the canopy (2a) to the mounting plate (1c) using the decorative nut (2b).
- Install the recommended lamp (4a) (lamp not provided) into the fixture socket. Refer to the socket label for maximum wattage and type.
- Secure the glass (3b) to the fixture (3a) by threading it clockwise.
You are now ready to enjoy your fixture.
Technical Support
Contact our technical support for any assistance:
- Phone: 1.855.855.8926
- Email: technicalsupport@aloralighting.com
Contact Information
Canada: 19054 28th Avenue Surrey – BC V3Z6M3
USA: 3035 E. Lone Mountain Rd – Las Vegas, NV,89081
Website: www.aloralighting.com
WARNINGS AND CAUTIONS
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note
- 120V input
NOTICE
- The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
- This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.
ASSEMBLY INSTRUCTIONS
Step 1
Remove the fixture from its original package.
Step 2
Separate mounting plate (1c) from the canopy (2a) by removing the decorative
nut (2b).
Step 3
Attach mounting plate (1c) to electrical junction box (1a) using junction box
screws provided (1e) in the hardware package.
Step 4
Make proper electrical connections (black to hot “L”, white to neutral “N”,
ground to “GND”) with wire nuts (1b) provided in the hardware package.
Step 5
Attach canopy (2a) to mounting plate (1c) with decorative nut (2b).
Step 6
Install the recommended lamp (4a) (not provided) (referred to on the socket
label for maximum wattage and type) into the fixture socket. Secure glass (3b)
to fixture (3a) by threading clockwise. You are now ready to enjoy your
fixture.
P: 1.855.855.8926
CANADA: 19054 28th Avenue Surrey – BC V3Z 6M3
USA: 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
www.aloralighting.com20230619