BORMANN BWR5220 Kurbadoros Plumber User Manual
- June 9, 2024
- BORMANN
Table of Contents
BWR5220 Kurbadoros Plumber
Product Information
The BWR5220 050094 is a product manufactured by Nikolaou Tools. The product user manual version is 2.2 and is available in English and Greek languages. The product is compliant with current technical standards and is made using normal, good-quality materials.
Product Usage Instructions
The product usage instructions are not provided in the given text extract
from the user manual. Further information is required to provide detailed
product usage instructions.
Packing List
Specifications and operating instructions
Introductions:
In accordance With the advanced technology for manufacturing the pipe
Benders, the product has been produced With the usage Of manual operated Oil
pump which has the functions of 1m.” and quick speeds and has equipped
releasing device for overloading. Owning a refined forged mould Steel. the
pipe bender features ideal structuring. light weight, Size and long periods or
usage. It Can be applies to the industries Of building construction, chemical,
petroleum etc,
Operation Methods:
- Tighten the switch. Oil the touching surfaces Of the supporting rollers, moulds and the pipes to be bended.
- In line with the sizes of the pipes to be bended, select the appropriate bending mould and fix it on the top of the pump stem. _ The slots of the two supporting rollers should face the bending mould and please pay special attention to fixing the supporting rollers on the relevant assembling holes of the upper and lower plates. The supporting rollers With max. Size are to be fixed in the holes on the outer lane. Thus it is possible to prevent the wrong assembling of the supporting rollers and avoid the mould and other parts from being damaged.
- When the pipe is in the bending place. close the upper plate. Move the mould to the pipe by the operation of the operations of the slow pump. After bending, turn on the switch and the piston will be reset automatically. Open the upper plate and take out thc bended pipe.
Precautions:
- Before operation. please check the Oil level Of the Oil tank. If it is lack Of Oil, fill the Oil substantially into the Oil tank.
- Before the working starts. the switch should be closed tightly, Otherwise the pressure will not be raised. Please loose thc screw of the oil nozzle so as to circulate the air in the oil tank.
- The dia of thc pipe to be bended should be similar to that ofthc slots on the mould. otherwise, the pipe to be bended will be deformed and the mould will bc damaged. The Seam Of the welded pipe Should not be faced directly to the mould surface, During the processions Of the bending, the IWO supporting rollers should be rolling simultaneously While the pipe is sliding Within the slot or the mould. If only one supporting roller is in action. Stop the operation at once.
- Clean the equipment periodically and when add Oil to the Oil tank. the Oil must be filtered with the special filtering mesh. The filteringdevlce should be cleaned frequently.
- machine oil used by this equipment is 15#.
Spare parts
For customers convenience Of maintenance, some spare parts have been packed into the bags. They are seal rings Model Y X: 028 (IPcs) and d16 (2Pcs).
Troubles shooting
Structural drawing
- Piston pump
- Switch
- Oil nozzle
- Oil pump seat
- Handle
- Upper plate
- Action lever
- Supporting rollers
- Bending moulds
- Lower plate
- Bracket
- Oil tank
- Oil-draining hole
- Handle seat
The workshop equipment has been manufactured according to strict standards set
by our company, which are aligned with the respec ve european quality
standards. The workshop
equipment is provided with a warranty period of 12 months. The warranty is
valid from the date of purchase of the product. Proof of the warranty right is
the purchase document of the
workshop equipment (retail receipt or invoice). Under no circumstances shall
the company cover the relevant cost of spare parts and respec ve required
working hours unless a copy of
the purchase document is presented. In case the repair has to be done by our
service department the cost of transporta on (to and from) is en rely borne by
the sender (client). The said
equipment must be sent for repair to the company or to an authorized workshop
in the appropriate way and means of transport.
WARRANTY EXEMPTIONS AND RESTRICTIONS:
- Spare parts that wear out naturally as a consequence of being used.
- Workshop equipment damaged as a result of non-compliance with the instruc ons of the manufacturer.
- Workshop equipment poorly maintained or taken care of.
- Use of improper spare parts or accessories.
- Workshop equipmente given to third en es free of charge.
- Damage as a result of mistaken assembly.
- Damage as a result of poor quality of lubricant.
- Damage as a result of not cleaning the equipment as required.
- Equipment that has been modifi ed or disassembled by unauthorized personnel.
- Equipment used for rent.
The warranty covers only the free of charge replacement of the component that presents a manufacturing defect or material failure. In case of lack of a specifi c spare part the company reserves the right to replace the equipment with another of the same kind. A er all warranty procedures have been concluded, the warranty period of the equipment shall not be extended or renewed. The spare parts or equipment that are replaced remain in the possession of our company. Requirements, other than those men oned in this warranty form, regarding repairing a piece of equipment or damage thereof, do not apply. Greek law and rela ve regula ons apply to this warranty.
WARRANTY
This appliance is a quality product. It was designed in compliance with current technical standards and made carefully using normal, good quality materials. The warranty period is 12 months and commences on the date of purchase, which can be verified by the receipt, invoice or delivery note. During this warranty period all functional errors, which, despite the careful treatment de-scribed in our operating manual, are verifiably due to material flaws, will be rectified by our after-sales service staff. The warranty takes the form that de-fective parts will be repaired or replaced with perfect parts free of charge at our discretion. Replaced parts will become our property. Repair work or the replacement of individual parts will not extend the warranty period not will it result in a new warranty period being commenced for the appliance. No sepa-rate warranty period will commence for spare parts that may be ted. We cannot offer a warranty for damage and defects on appliances or their parts caused by the use of excessive force, improper treatment and servicing. This also applies for failures to comply with the operating manual and the installation or spare and accessory parts that are not included in our range of products. In the event of interference with of modifications to the appliance by unauthorized persons, the warranty will be rendered void. Damages that are attributable to improper handling, over loading, or natural wear and tear are excluded from the guar-antee. Damages caused by the manufacturer or by a material defect will be corrected at no charge by repair or by providing spare parts. The prerequisite is that the equipment is handed over assembled, and complete with the proof of sale and guarantee. For a guarantee claim, only use the original packaging. That way, we can guarantee quick and smooth guarantee processing. Please send us the appliances postpaid or request a Freeway sticker. Unfortunately we will be unable to accept appliances that are not postpaid. The warranty does not cover parts that are subject to natural wear and tear. If you wish to make a warranty claim, report faults or order spare parts or accessories, please contact the af-ter-sales center below: Subject to change without prior notice.