joie Roomie Go Bedside Crib Clay Instruction Manual
- June 9, 2024
- Joie
Table of Contents
Roomie Go Bedside Crib Clay
Instruction
Manual
IMPORTANT, RETAIN FOR FUTURE REFERENCE. READ CAREFULLY
Parts List
Height Adjustment
Use Wheels
Welcome to Joie™
Congratulations on becoming part of the Joie family! We are so excited to be
part of your life with your little one. While using the Joie roomie™ go, your
baby is enjoying a high quality, fully certified product, approved to
European safety standards EN 1130:2019/AC:2020 and EN 16890:2017+A1:2021. This
product is suitable for use with children weighing under 9kg (approximately
0-6 months). Please carefully read this manual and follow each step to ensure
a comfortable sleeping and best protection for your child.
Please keep the Instruction Manual handy for future reference.
Visit us at Joiebaby.com to download manuals and see more exciting Joie
products.
For warranty information, please visit our website at
joiebaby.com
! IMPORTANT
RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.
Emergency
In case of emergency or accident, it is most important to have your child
taken care of with first aid and medical treatment immediately.
Parts List
Make sure all parts are available before assembly. If any part is missing,
please contact local retailer.
No tools are required for assembly.
- Travel Cot
- Mattress
- Carry Bag
- Long Rail
- Buckle A
- Button for height adjustment
- Wheel
- Buckle B
- Buckle C
- Connecting webbing
- Button for retractable feet
WARNING
! Adult assembly required.
! Do not use this product without reading the instructions for use first.
! Discontinue using product when child reaches 9kg (approximately 0-6 months)
or is able to climb out.
! Stop using the product as soon as the child can sit or kneel or pull itself
up.
! Do not use the product if any part is broken; torn or missing and use only
spare parts approved by manufacturer.
! Placing additional items in the product may cause suffocation.
! Do not place the product close to another product, which could present a
danger of suffocation or strangulation, e.g. strings, blind/curtain cords,
etc.
! DO NOT USE the product in “Crib Configuration” and/or “Bedside sleeper
Configuration” if any part is missing, damaged or broken. Contact joie for
spare parts and user instructions if needed. DO NOT substitute parts.
! Be aware of the risk of burning cigarettes, open fires and other sources of
strong heat, such as electric bar fires, gas fires, etc. in the near vicinity
of the crib.
! The crib should be locked in the fixed position when the child is left
unattended.
! When the product is being used, and above all in “Crib Configuration”, the
wheels must always be locked.
! Check the tightness of the attachment system before each use by pulling the
bedside sleeper in a direction away from adult bed.
! The fixing straps are included in the packaging. Other fastening systems
should not be used.
! There shall never be a gap between the lower side of the bedside sleeper and
the mattress of the adult bed.
! If there are gaps between the lowest part of the Bedside sleeper crib and
the parents’ mattress, DO NOT use the product.
! Gaps should not be filled with pillows, blankets or other items.
! DANGER!-Always completely raise the drop side when not attached to the
adult’s bed.
! To avoid hazards from the child’s neck being caught on the top rail on the
side that is next to the adult bed, the top rail must not be higher than the
adult bed mattress.
! To avoid the risk of your child being strangled the attachment system to the
adult’s bed shall always be kept away from and out of the crib.
! The product must always be placed on a horizontal surface.
! Young children should not be allowed to play unsupervised in the vicinity of
the crib.
! Do not use the product without the frame.
! Keep the fixing straps out of reach of children.
! Do not use more than one mattress in the cot.
! Only use the mattress sold with this crib, do not add a second mattress on
this one, suffocation hazards.
! When not attached to the bed, the crib can be inclined by a maximum of 4
positions between one leg support and the other.
! When in the “Bedside sleeper Configuration” (fastened to the bed), the crib
must never be inclined.
! All assembly fittings should always be tightened properly and that care
should be taken that no screws are loose, because a child could trap parts of
the body or clothing (e.g., strings, necklaces, ribbons for babies´ dummies,
etc), which would pose a risk of strangulation.
! The mattress of the adult´s bed shall be aligned to or above the height of
the drop side in the middle position.
! To prevent a suffocation hazard from entrapment, the bedside sleeper shall
be properly secured to the adult bed using the attachment system.
Bedside Sleeper Assembly
see images 1 – 7
Please read all the instructions in this manual before setting up and using
this product.
Please make sure the retractable feet of crib extend forward when using the
product, see fig 5 6 .
Height Adjustment
see images 8- 12
! The crib can be adjusted to different height positions.
! The crib can be inclined with a maximum variance of 4 positions between one
leg and the other (for example: the right leg in position 5 and the left leg
in position 1, see fig. 11 12 ).
! The head of the child should always be positioned on the highest side. 11 12
! It only be applicable to cradle state, but not to bedside sleeper state. 11
12
Use Wheels
see images 13- 14
At this point the crib is ready to be used.
! Do not use the crib with adjustable feet partially or totally retracted. The
correct position for use is illustrated in figure. 5 6 In the case of
accidental knocks against adjustable feet, return them to the correct position
by lifting the crib slightly.
Use Bedside Sleeper
see images 15- 29
1.Press the button 15 – 1 to drop the side down 15 – 2.
! When used in bedside sleeper configuration, only adjust the drop side near
the bed to the middle position, the other drop side must be in the highest
position.
2.Position next to bed 17 , Connect Buckle to roomie go 19 then loop strap
around bed frame and connect to adjuster buckle 20 , then pull straps tight 21
.
! During fixing the crib to the parent’s bed, the feet of the crib can be
retracted inward by pressing the folding button to closer the parent’s bed. 18
If you want the feet extend outward, only need to lift the feet off the
parent’s bed, they can extend outward automatically.
3.Ensure no gap between parent’s mattress and roomie go 22 . The maximum
height difference between the parents’ mattress and the drop side in the
middle position is 2cm 23.
! See figs 24 & 27 for incorrect installation.
4.The type of adult bed which can be used with bedside sleeper is slatted bed
frame and box / divan bed frame, the dimensions of adult bed shown on fig. 28
& 29
! Check to make sure that the crib in the bedside sleeper mode does not
interfere with the parent’s bed.
! During use, make sure that the parent’s bed sheets, blankets etc. Do not
enter and cover the interior of the crib.
! In the bedside sleeper mode the 2 legs of the crib should always be adjusted
to the same height.
! Before every use always check to make sure that there is no space between
the parent’s mattress and the side of the crib. If there is, pull the belts
firmly to tighten until there’s no space and the permitted condition of use
has been restored.
! Use of the product is only permitted with beds and/or mattresses with
straight sides. Use of the product with round beds and/or mattresses or water
beds is not permitted.
! When the product is used in the “bedside sleeper mode” (fixing to the bed),
it should always be fitted to the long side of access to the bed. Do not fix
the product to the head or bottom of the bed.
Use Storage Bag
see images30-36
! Refer to Bedside Sleeper Assembly and perform reverse operation to fold the
unit, and use the bag for convenient transportation.
Care and Maintenance
see images37-38
- The fabric cover of crib is not removable.
- Your product can be spot cleaned with a sponge and soapy water.
- Do not use undiluted neutral detergent, gasoline or other organic solvent to wash the product. It may cause damage to the product.
- To wash carry bag, machine wash in lukewarm water and drip-dry. Do not use bleach.
- At the beach or in the garden, clean sand and grit off your product. Sand in the long rail locks may cause damage.
- From time to time, check your product for worn parts, torn material or stitching. Replace or repair the parts as needed.
- If the product is not in use for a long period of time, please put it in the shade where your child cannot access it.
Allison Baby UK Ltd,
Venture Point, Towers Business Park
Rangeley, Staffordshire, WS15 1UZ
NUNA International B.V.
Van der Valka Bourmanweg 178 C,
2352 JD Leiderdorp, The Netherlands.
Share the joy at joiebaby.com