GOODWE 4G Kit-EC&4G Kit-AU 4G Module Solar Inverters Installation Guide
- June 9, 2024
- GOODWE
Table of Contents
4G Kit-EC &4G Kit-AU
Quick Installation Guide
340-00652-02
These instructions will be updated from time to time due to product version
upgrades or for other reasons. Unless otherwise specified, they are not a
substitute for the safety instructions given on product labels or in user
manuals.
All descriptions in the document are intended only as user instructions.
Technical Data
| Model | 4G Kit-EC | 4G Kit-AU |
|---|
General Data
Max. Inverters Supported| 1| 1
Connection Interface| USB| USB
Installation| Pluq and Play| Pluq and Play
Indicator| LED Indicator| LED Indicator
Dimensions (WxHxD mm)| 499632| 499632
Standard SIM Card Size (mm)| 2515| 2515
Ingress Protection Rating| IP65| IP65
Power Consumption (W)| <4| <4
Operating Temperature Range (°C)| -30-60°C| -30-60°C
Storage Temperature Range (°C)| -40-70°C| -40-70°C
Relative Humidity| 0-100% (non-condensing)| 0-100% (non-condensing)
Max. Operating Altitude (m)| 4000| 4000
Wireless Parameter
LTE-FDD| B1/B3/137/B8/1320/B28A| B1/B3/137/B8/1320/B28A
LTE-TDD| /| B40
WCDMA| B1/B8| B1/B2/B5/B8
GSM/GPRS| B3/B8| B3/B8
Applications
Information regarding the SIM operators, inverter models and versions
supported by 4G modules will be updated from time to time, and the latest
support details can be obtained by scanning the QR code.
Download the latest version of SolarGo and SEMS Portal APP from Google Play or
App Store.
Installation and Commissioning
**Installing Bluetooth module
**
- When installing the Bluetooth and 4G modules, make sure the inverter is powered off.
- During installation, wear antistatic gloves, and take electrostatic protection measures.
1. Check that the items delivered are correct.
1 x 4G module
1 x Bluetooth module
1 x 4G antenna
1 x 5-pin USB adapter
1 x Quick Installation Instructions
4 x M3 screws| 2. (Optional) Install the 5-pin USB adapter for the inverter.
If the inverter uses a 5-pin interface for communication, perform this step.
| 3. Install Bluetooth module.
---|---|---
Setting APN parameters
Before setting the parameters, make sure that:
- The inverter is powered on.
- Communication is functioning properly between Bluetooth module and inverter.
- The SolarGo APP has been downloaded from Google Play or App Store. (SolarGo with V5.0.0 or newer version in Android system or with V5.0.0 or newer version in iOS system is required. )
- The procedure is basically identical for Android and iOS operating systems, with only slight difference between the interfaces. These instructions use the iOS operating system as an example.
- Please use the initial password when logging in for the first time, and change it as soon as possible to one that is memorable for you. To keep your account secure, it is recommended to change your password regularly.
SolarGo APP
https://www.sems.com.cn/home/solargo
Installing 4G module
- When installing the Bluetooth and 4G modules, make sure the inverter is powered off.
- During installation, wear antistatic gloves, and take electrostatic protection measures.
Powering on the device
- Power on the inverter, thus powering on the 4G module.
- Observe the status of the indicators on the 4G module and the inverter. (When the communication indicator on the inverter is ON continuously, it means that communication is functioning properly.
For other indicator status, refer to the User Manual of the relevant inverter model.)
| Indicator | Colour | Status | Notes | Description |
|---|
Power| Green| ON continuously| Normal| Module powered on
OFF| Abnormal| Module not powered on
Communication
| Blue| Flashing slowly (On for 0.2s, Off for 1.8s)| Normal| Searching for
connections
Abnormal| Staying off for 15 seconds after illuminating, which indicates the
SIM card is not inserted or it has a loose connection. Insert the SIM card, or
remove it and then re-insert.
Flashing slowly (On for 1.8s, Off for 0.2s)| Normal| Standby
Abnormal| If the indicator stays in this state for an extended period (more
than 5 minutes), the APN is set incorrectly, the SIM card has no signal, the
signal strength is weak, or there is no data. Please check the APN information
and reset the APN parameters on the SolarGo APP. Contact the operator to
verify the SIM card signal. Check whether the SIM card credit and data are
sufficient. If not, please top up.
Flashing rapidly (On for 0.125s, Off for 0.125s)| Normal| Data uploading
Device Replacement
- Before replacing the 4G module, check that the inverter is powered down, and the new 4G module is ready for installation.
- Remove the 4G module.
- (Optional) If SIM card is bound to an existing device, consult the operator to unbind it.
- Install the new 4G module.
- Power on the inverter.
GoodWe Technologies Co., Ltd.
No. 90 Zijin Rd., New District,
Suzhou, China
www.goodwe.com
service@goodwe.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>