MACKIE THRASH 212 GO 12 Inch Battery Powered Loudspeaker User Guide

MACKIE THRASH 212 GO 12 Inch Battery Powered Loudspeaker

PRODUCT INFORMATION

The THRASH212 GO 12 Battery-Powered Loudspeaker is a portable and battery- powered speaker designed for outdoor and indoor use. It has a Class-I construction and must be connected to a mains socket outlet with a protective earthing connection. The loudspeaker has been designed to comply with FCC/IC RSS-102 radiation exposurelimits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body. The device complies with Part 15 of the FCC Rules and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic standards.

PRODUCT USAGE INSTRUCTIONS

1. Read and keep these instructions for future reference.

2. Heed all warnings and follow all instructions provided in the manual.

3. Do not use this apparatus near water or place any object filled with liquids on the apparatus.

4. Clean only with a dry cloth and do not block any ventilation openings.

5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

6. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

7. Only use attachments/accessories specified by the manufacturer.

8. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

9. Unplug this apparatus during lightning storms or when unused for long periods of time.

10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
    dropped.

11. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

12. Changes or modifications to this device not expressly approved by LOUD Audio, LLC could void the user’s authority to operate the equipment under FCC rules.

13. To prevent electric shock hazard, do not connect to mains power supply while grille is removed.

14. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
    operate normally, or has been dropped.

14. This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as vases or beer glasses, shall be placed on the apparatus.

15. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications to this device not expressly approved by LOUD Audio, LLC could void the user’s authority to operate the equipment under FCC rules.

CAUTION
RISK OF ELECTRIC SHOCK! DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOTREMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL

• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the userto the prescence of uninsulated “dangerous voltage” within the product’s enclosure, that may be of significant magnitude to constitute a risk of electric shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user of the prescence of important operating and maintaining (servicing) instructions in the literature accompanying the appliance.
• WARNING — To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
• CAUTION — To prevent electric shock hazards, do not connect to mains power supply while grille is removed.
• CAUTION — Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

1. The equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. The equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.
2. The maximum ambient temperature during use of the appliance must not exceed 45˚ C.
3. Operation frequency: 2400MHz – 2483.5MHz
4. This apparatus has been designed with Class-I construction and must be connected to a mains socket outlet with a protective earthing connection (the third grounding prong).
5. This apparatus does not exceed the Class A/Class B (whichever is applicable) limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications.
6. This device complies with Part 15 of the FCC Rules [and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s)]. Operation is subject to the following two conditions:
7. this device may not cause harmful interference, and
8. this device must accept any interference received, including interference that may cause undesired operation.

Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a period of time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposures shown in the following chart. According to OSHA, any exposure in excess of these permissible limits could result in some hearing loss. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels use hearing protectors while the equipment is in operation. Ear plugs or protectors in the ear canals or over the ears must be worn when operating the equipment in order to prevent permanent hearing loss if exposure is in excess of the limits set forth here:

WARNING — The battery (battery or battery or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.

Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.

Hookup Diagrams

• Stereo Speaker Hookup
• Using a microphone and daisy-chaining
• PA System with one powered subwoofer
• PA System with two powered subwoofers

Rear Panel Descriptions

1. Power Connector Connect the supplied AC power cord to this IEC jack.
2. Power Switch Turns the loudspeaker on and off. The front LED will illuminate when powered.
3. Input Connect a mic or line-level signal from a mixer or other signal source.
4. Gain Adjusts the input sensitivity.
5. Bluetooth Press and hold to pair with a Bluetooth device. The Bluetooth connection may disconnect when affected by electrostatic discharge (ESD) or electrical fast transients (EFT). If this occurs, manually reconnect the Bluetooth connection.
6. Speaker Link Press and hold to initiate speaker linking with another THRASH212 GO.
7. Mix Out Connect subwoofer or additional full range loudspeakers.
8. Volume Adjusts the overall output level.
9. Power / Overload LED The Power LED will illuminate when powered. The overload LED illuminates when a signal is too high.
10. Battery LED This tri-colored LED displays the remaining battery life.

Getting Started

1. Read and understand the Important Safety Instructions on page 2.
2. Make all initial connections with the power switches OFF on all equipment. Make sure the master volume, level and gain controls are all the way down.
3. If not using a subwoofer, connect the outputs from the mixing console (or another signal source) to the inputs on the rear panel of the loudspeakers.
4. If using a subwoofer, connect the outputs from the mixing console (or another signal source) to the inputs on the rear panel of the subwoofer, then connect the high pass outputs from the subwoofer to the inputs of the loudspeakers.
5. Push the line cord securely into the subwoofer’s/loudspeaker’s IEC connectors and plug the other ends into grounded AC outlets. The subwoofer/loudspeaker may accept the appropriate voltage as indicated near the IEC connector.
6. Turn the mixer (or another signal source) on.
7. Turn the subwoofer on.
8. Turn the loudspeakers on.
9. Be sure that the volume of the input is the same as it would be during normal use.
10. Start the signal source and raise the mixer’s main L/R fader up to a comfortably loud listening level.

Technical Specifications

| THRASH212 GO
---|---
Frequency Range (–10 dB)| 52 Hz – 20 kHz
Coverage Pattern **| 90˚ horizontal x 60˚ vertical (vertikal)
Maximum SPL Peak SPL máximo en picos| 125 dB
Total System Power| 300 watts peak
Potencia total| 300 watios en picos
Puissance totale **| 300 watts crête
Gesamtleistung| 300 Watt Spitze
Low Frequency Graves| 12 in / 305 mm woofer, 250 watts peak, Class D power amplifier Woofer de 12 in / 305 mm, Etapa de potencia clase D y 250 watios en picos
Basses| Woofer de 12″ / 305 mm, Ampli de puissance Classe D 250 watts crête
Bässe| 12“ / 305 mm Woofer, 250 Watt Spitze Class D Endstufe
High Frequency| 1.0″ / 25 mm titanium high frequency driver – 50 watts peak Class D power amplifier
Agudos| Cabezal de agudos fabricado en titanio de 1.0″ / 25 mm – Etapa de potencia de clase D y 50 watios en picos
Hautes fréquences| Tweeter en titane d‘1,0″ / 25 mm – Ampli de puissance Classe D 50 watts crête
Höhen| 1,0“ / 25 mm Hochfrequenz-Titantreiber – 50 Watt Spitze Class D Endstufe
Crossover Point| 2.4 kHz
Input Type| 2 x Female XLR – 1/4″ balanced TRS combo jack and Bluetooth
Tipo de entrada| 2 x clavijas combo XLR – TRS de 6,3 mm balanceadas hembra y Bluetooth
Type d’entrée| 2 connecteurs combinés XLR – Jack symétrique 6,35 mm et Bluetooth
Eingangstyp| 2 symmetrische XLR / 6,3 mm TRS-Kombibuchsen und Bluetooth
Output| Male XLR balanced [Mix Out]
Salida| XLR macho balanceado [Mix Out]
Sortie| XLR mâle symétrique [Mix Out]
Ausgang| XLR-Stecker symmetrisch [Mix Out]
Bluetooth| 5.0 Audio streaming • Streaming audio • flux audio • Audio- Streaming
Power Requirements| 100–240V~, 50-60Hz, 75W
Battery Technology| 12500mAh, 11.1V, 138.75Wh
Protection Features| Peak and RMS limiting, power supply and amplifier thermal protection
Funciones|  amplificador
Protections| Limitation crête et efficace, protection contre
Schutzfunktionen| Peak- und RMS-Limiting,
Size (H x W x D)| 26.4 x 14.8 x 12.3 in

669 x 375 x 313 mm

Weight| 35.9 lb

16.3 kg

WARRANTY AND SUPPORT

Visit WWW.MACKIE.COM to:

• Identify WARRANTY coverage provided in your local market. Please keep your sales receipt in a safe place.
• Retrieve a full-version, printable OWNER’S MANUAL for your product.
• DOWNLOAD software, firmware and drivers for your product (if applicable).
• REGISTER your product.
• CONTACT Technical Support.

19820 NORTH CREEK PARKWAY #201 • BOTHELL, WA 98011 • USA Phone: 425.487.4333 • Toll-free: 800.898.3211 • Fax: 425.487.4337

Part No. 2055974 Rev. B 02/23 ©2023 LOUD Audio, LLC. All Rights Reserved. Hereby, Loud Audio, LLC declares that the radio equipment type [THRASH212 GO] is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of conformity and Bluetooth conformity are available at the following internet address: https://mackie.com/en/support/drivers- downloads?folderID=27309

References

• MACKIE
• Drivers/Downloads | MACKIE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>