cablematic HDEX0021M1 200m HMI Wireless Extender User Manual

HDEX0021M1 200m HMI Wireless Extender
User Manual

Model No:
HDEX0021 M1 (1080P 1t01)
HDEX0021 M2 (1080P 1 to More)
HDEX0022M1 (4K 1 to1)
HDEX0022M2 (4K 1 to More)

Enjoy the vivid world!
REMARK
The manufacturer does not make any commitment to update the information contained here

Dear customer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
The products are designed to make you’re a/V device use more convenient, comfortable, productive, and cost-efficient.
This product will let the user experience transmitting HD content by wireless. The HDMI sources over the wireless kit extend high-definition video and audio to any HDTV display up to 100 meters away. The extender follows the TCP/IP standard Wireless Transport Protocol, so it has a high transmission rate and strong anti-interference capability. It also supports HOM I mirror output and infrared remote control extension. The HDMI Wireless Extender is widely applicable to office presentations, lectures, education, conference, family entertainment, etc.
Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, and school and corporate training environments.

INTRODUCTION

FEATURES:

• Contains a transmitter (TX) and a receiver (RX). The HDMI signal over a wireless transmission from the transmitter to the receiver
• One TX can be paired with multiple (up to 4PCS) RX
• The TX support one HDMI loop output, for the local screen monitor
• Support HDMI resolution: 480P- 080P@50/60Hz, Up to 4K@30Hze
• Use the internationally accepted 5G ISM frequency band, high transmission rate and strong anti-interference capability
• Using external dual-gain antennas. Transmission distance up to 200 meters wireless in open space.( Maybe affected by the use environment)
• Extends wide-band infrared remote to control source device from display sid
• Support OSD, for Informed of device status e Simple Plug and Play, no software installation required
• Supports both panel settings and Web Configuration Interface, Simple and easy to use

PACKAGE CONTENTS:

1. HDMI Wireless Transmitter 1pcs
2. HDMI Wireless Receiver 1-4pcs (optional)
3. IR Transmitter cable 1pcs
4. IR Receiver cable 14pcs
5. User manual 1pcs
6. DC power adapter 2-5pcs

FEATURES OF THE INTERFACE:

Transmitter (TX)

Receiver (RX)

POWER: Power indicator
STATUS: System status Indicator
HDMI: HD MI input/output status indicator
CHANNEL: Wireless channel switch key
HIGH-LOW: Rate selector switch
IR OUT &RESET: Insert IR transmitter cable & Factory Reset Button
IR IN &RESET: Insert IR receiver cable & Factory Reset Button
HDMI IN: HDMI INPUT
HDMI OUT: HDMI OUTPUT
DC5V: 5V DC in lac

OPERATING AND CONNECTION:

1. Connect one HDMI cable from the DVD/BD player into the HDMI input port of the HDMI wireless TX.
2. Connect one HDMI cable from the TV/Monitor to the HDMI output port of the H DMI wireless RX.
3. Connect the IR Transmitter cable to the HDMI wireless TX and the IR Transmitter cable must face the control target device.
4. Connect the IR Receiver cable to the HDMI wireless RX.
5. Connect 5V power supplies to the TX&RX, the POWER indicator will be lit at this moment.
6. The device will automatically connect after power on. The STATUS indicator of TX and RX will be lit when the connection is successful. If the HDMI input or output signal is normal, the HDMI indicator light will be lit also. The STATUS indicator flashes continuously during normal transmission.
7. In the case of multiple RX, all RX are connected in the same way.

Panel key operation instructions:

1. Select transmission rate: When the rate switch is selected at “HIGH,” the product works in high rate mode, the RX has the best picture quality. If the rate switch is selected at “LOW”, the product works in low rate mode, the RX has the best working distance at the moment.
2. Change Wireless channel: Press the CHANNEL” key on the front panel of TX to cyclic switch the multiple wireless channels. If the product works unsteadily or the pictures are not fluent, You can try a different working channel.
3. Restore Factory Setting: To press the button for lasting three seconds, then the HDMI Status Led Light will flash three times and restart, it shows that Restore Factory Set is successful.

The Factory Reset Button is located at the bottom of the Hole of the IR IN/OUT.
It is able to work under power-on status. Use one long and narrow insulated stick (like a toothpick) to insert the hole end to press the button.
Note: You must restore the factory set at the transmitter and all receivers before they can be reused.

Web settings:

To prevent the interference caused by the same frequency device, the Wireless HDMI Extender support setting up the transmit channel and SSID by the WEB. For safety, the user should change the SSDI and the password on the first login. Please follow the below steps:

1. Connect 5V power supplies to the transmitter and all receivers, and let them be connected.

2. Turn on the WLAN of the mobile phone / PC, search and connect SSID:xXXX_HDMI_Wireless, Enter the default password: 00000000.

3. Modify the IP address type of the mobile phone/PC to Auto. When you select the static type, you must be set the IP to 192.168.1. xxx address segment range, e.g. 192.168.1.100.

4. Open the browser and scan the QR code or enter “192.168.1.10” in the address bar to enter the configuration page. As shown below:
   http://192.168.1.10
   

5. Enter the default login password: admin, click “Login” and open the Settings Interface. If you want to modify the login password, please click on ” Modify “, after modified click “save” to save and exit. Restore factory settings when click “reset”.
   

6. If you have an error in a setting or forgot the password, you can restore the factory setting.

SPECIFICATIONS:

Model No.| HDEX0021M1 (1080P 1to1)
HDEX0021 M2 (1080P 1 to More)
HDEX0022M1 (4K 1t01)
HDEX0022M2 (4K 1 to More)
---|---
Model name| 200m HDMI Wireless Extender
TX Interfaces| HDMI In x1,HDMI LOOP Out x1,IR Out x1,DC In x1
RX Interfaces| HDMI Out x1,IR In x1,DC In x1
HOMI resolution| HDMI resolutionHD:480P/576P/720P/10801/ 1080P©50/60(All series )1080P/4K(3840×2160) @24/25/30(Only HDEX0022M series ) PC:800X600(SVGA),1024X768(XGA), 1280X1024(SXGA),1366X768(WXGA+), 1440X900(WXGA+),1680X1050(WSXGA+), 1600X1200(UXGA), 1920X1200(WUXGA)
HDMI Audio format| LPCM2.0 48KHz/16Bit (HDEX0021M series)
LPCM2.0 32/44.1/48KHz/16Bit (HDEX0022M series)
Video transmission rate| HIGH:8Mbps, LOW:4Mbps
Antenna type| External dual 3dBi gain antenna
Wireless standard| IEEE 802.11a/n
Wireless Band| 5GHz ISM Band
Max Wireless Data rates| 2T2R up to 300Mbps
Transmission delay| 5200ms
Transmit Output Power (IPEX)| 20dBm Max
Transmission distance| up to 200 meters (in open space)
Output cable length| 1080PS12m/4k58m/AWG 26 HDMI Cable
IR Carrier frequency| 20-60KHz
Power adapter specification| AC 100V-240V 50/60Hz,DC 5V/2A
Max working current| TXS1.1A RXs1A (HDEX0021M series) TX5.1.1A RXS700mA (HDEX0022M series)
Working temperature range| 5 +45°C
Working humidity range| 10 to 90%RH (No Condensation)
Storage temperature| -15 to 55°C
---|---
Storage humidity| 5 —95%RH(No Condensation)
Size| 127.5×127.5×25 (mm)
Weight| TX=163g/RX=160g (HDEX0021M series)
TX=167g/RX=165g (HDEX0022M series)
Accessories| Manual x1, Power Adaptor x2, I
R Transmitter cable x1, IR Receiver cable x1

Notes:
PIs use the machine as the instruction listed to keep the long use lifetime of the machine.

1. The machine should be placed at a spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.
2. All parts will be free from the strong shake, hit, and fall.
3. Touching the power adaptor with wet hands is prohibited.
4. Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.
5. PIs turn the power off when the machines are not been used for a long time.
6. Pls do not open the cover and do not touch the inside parts.
7. Pls, use the original factory power adaptor.

FAQ:
Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common troubleshooting way is shown below:

2. Please check the TX power supply
3. Make sure the TV is working regularly
2| Display “Connecting”| 1. Please check the RX power supply
2. Please check the WEB is set correctly
3. Co-channel interference. Pls select a new channel
4. Pls reset or turn off the power restart
3| Display “No signal”| 1. Check the signal source is power on and the output is normal.
2. Check the signal source output resolution.
3. Make sure the HDMI cable is properly connected
4| Transmission distance is short| 1. Please adjust the angle of the antenna or adjust the placement
2. Concrete walls, Brick, Wallpaper, Metal. The bulletproof glass will shorten the signal cover range or cause big signal loss.
3. Co-channel interference. Pls select a new channel
5| Screen not fluent| 1. Please adjust the angle of the antenna or adjust the placement I
2. Co-channel interference. Pls select a new channel
6| Can’t find the SSID| 1. Please check the RX and TX power supply
2. Please check whether the Phone/PC supports 5G band
3. Factory default or turn off the power restart
7| Can’t log in to the Web settings
interface| 1. Please check the RX and TX power supply
2. Please check the IP type of the mobile phone/PC is Auto
3. Please check the IP is 192.168.1. XXX address range
4. Please try Login again after changing a browser

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>