Xtorm FS5271 Power Bank Instruction Manual
- September 21, 2024
- Xtorm
Table of Contents
Xtorm FS5271 Power Bank
FAQ
Q: How long does it take to fully charge the Power Bank?
A: Using a 67W charger will fully recharge the Power Bank within 4 hours.
Q: Can I use multiple outputs simultaneously?
A: Yes, you can use multiple outputs simultaneously. Refer to the user manual for specific configurations when using different combinations of outputs.
SPECIFICATIONS
-
27.000 mAh Li-Polymer / 99.9Wh
-
1x USB-C PD 67W
1x USB-C PD 27W
1x USB-A 22.5W (QC 3.0 18W / SCP 22.5W) -
USB-C PD 67W input
-
168x83x33 mm
-
562 grams
-
1x USB-C PD cable
1x Manual
When using multiple outputs
When using 2 outputs
- 1/2 Share 15W
- 2/3 18W + 45W
- 1/3 27W + 40W
When using all outputs
1/ 2 Share 15W 3 45W
PRODUCT OVERVIEW
-
Output USB-C PD 27W
-
Output
USB-A 22.5W
QC 3.0 18W / SCP 22.5W -
Output USB-C PD 67W
-
Input USB-C PD 67W
-
Power Button
-
Digital Power Indicator
-
Official Xtorm Label
CHARGING YOUR DEVICE
- Connect the USB-C end of the charging cable to the USB-C PD output of the Power Bank and the other end to the input of your device. The charging will start automatically.
- Charging some devices requires a charging cable other than the one supplied.
E.g. an Apple Lightning® or a Micro USB cable.
RECHARGING THE POWER BANK
- Connect the USB-C end of the charging cable to output 3 of the Power Bank and the USB end to a wall charger.
- For the fastest charging possible use a 67W charger. This will fully recharge the Power Bank within 4 hours.
LED POWER INDICATOR
- Power Button function:
- Single press to turn on the Power Bank.
- Double press to turn off the Power Bank.
- Long press (5s) activates “Low power mode” (to keep charging devices that request <100mA current)
- The display shows the remaining battery percentage between 0% (empty) and 100% (fully charged).
IN THE BOX
The fast charge indicator will light up when you are using the correct cable for fast charging your device. (67W USB-C PD and higher).
- Power Bank
- USB-C PD Cable
- Manual
RECYCLING
When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.
XTORM SAFETY CHECK
-
TEMPERATURE CONTROL
Provided with a temperature control chip that prevents overheating. -
OVERLOAD PROTECTION
Protects both the internal battery as well as the battery of the attached device from overcharging. -
SECURED POWER MANAGEMENT
Automatically picks the correct charging speed and efficiently devides power between attached devices. -
SHORT CIRCUIT PROTECTION
Breaks the circuit automatically when an overcurrent is detected. This protects the Xtorm chargerand your device from short circuit damage. -
A-CLASS BATTERY CELLS
We only use the best battery cells that provide the fast charging you need and meet all safety requirements. -
HIGH EFFICIENCY
Our power products are built to power your device as efficient as possible. This ensures the least possible loss of energy during the charging process.
Warnings
Don’t drop, dissemble or attempt to repair the charger by yourself. Avoid
exposure to water or high humidity. Don’t expose to any heat source. Keep out
of reach of children. Don’t use in the presence of flammable gas. The warranty
will lapse in the event of improper use. Telco Accessories has tested the
product in a test environment. All statements/declarations made by Telco
Accessories about the (operation) of the product are based on the results
obtained from such tests. These results/statements/declarations cannot be
guaranteed, for example in cases of deviating or injudicious use and/or use in
a different environment.
EU DECLARATION OF CONFORMITY
(In accordance with EN ISO/IEC 17050-1)
CUSTOMER SUPPORT
support@tag.nl
+31 (0)30 635 4800
TELCO ACCESSORIES GROUP
Hoofdveste 19, 3992DH Houten The Netherlands
#MOREENERGY