Q-TRAN QZ-STICK LED Power Supply Installation Guide
- June 9, 2024
- Q-TRAN
Table of Contents
Q-TRAN QZ-STICK LED Power Supply Installation Guide
TOP VIEW
QZ-STICK Components
- Driver Compartment
- Primary Compartment
- Secondary Compartment
- Mounting Tab Slots
Required Hardware
Mounting
-
The QZ-STICK can be mounted either vertically or horizontally, utilizing the supplied screws and the mounting tabs on the bottom of the enclosure
SIDE SLOT
-
The QZ-STICK must be mounted into a stud for sufficient support, using the slots of each mounting tab
-
When installing multiple QZ-STICK power supplies, seperate the enclosures by 3” of space from edge to edge. This prevents the rise of ambient temperature between the power supplies.
-
Wiring diagram
Phase Dimming
0-10v Dimming
Wiring from power supply to light fixture must be two conductor cable
QZ-STICK 96W
© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Specification subject to change. Rev-04-04-23
References
- Your Name as Your Email | Hover Realnames
- LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>