YAMAHA YH-WL500 Wireless Musical Instrument Headphones Owner’s Manual
- June 9, 2024
- Yamaha
Table of Contents
YH-WL500 Wireless Musical Instrument Headphones
Unfortunately, the provided text is not readable or understandable.
Can you please provide the correct text or document?
KZOBHQERRN
([SODQDWLRQRI*UDSKLFDO6PEROV
7KHOLJKWQLQJIODVKZLWKDUURZKHDG VPEROZLWKLQDQHTXLODWHUDOWULDQJOHLV
LQWHQGHGWRDOHUWWKHXVHUWRWKH SUHVHQFHRIXQLQVXODWHGGDQJHURXV
YROWDJHZLWKLQWKHSURGXFW
VHQFORVXUH WKDWPDEHRIVXIILFLHQWPDJQLWXGHWR
FRQVWLWXWHDULVNRIHOHFWULFVKRFNWRSHUVRQV
7KHH[FODPDWLRQSRLQWZLWKLQDQ HTXLODWHUDOWULDQJOHLVLQWHQGHGWRDOHUW WKHXVHUWRWKHSUHVHQFHRILPSRUWDQW RSHUDWLQJDQGPDLQWHQDQFHVHUYLFLQJ LQVWUXFWLRQVLQWKHOLWHUDWXUH DFFRPSDQLQJWKHSURGXFW
,03257$176$)(7<,16758&7,216
5HDGWKHVHLQVWUXFWLRQV .HHSWKHVHLQVWUXFWLRQV +HHGDOOZDUQLQJV
)ROORZDOOLQVWUXFWLRQV ‘RQRWXVHWKLVDSSDUDWXVQHDUZDWHU &OHDQRQOZLWKGUFORWK
‘RQRWEORFNDQYHQWLODWLRQRSHQLQJV,QVWDOOLQ
DFFRUGDQFHZLWKWKHPDQXIDFWXUHU
VLQVWUXFWLRQV ‘RQRWLQVWDOOQHDUDQKHDWVRXUFHVVXFKDV
UDGLDWRUVKHDWUHJLVWHUVVWRYHVRURWKHU
DSSDUDWXVLQFOXGLQJDPSOLILHUVWKDWSURGXFHKHDW
‘RQRWGHIHDWWKHVDIHWSXUSRVHRIWKHSRODUL]HG
RUJURXQGLQJWSHSOXJ$SRODUL]HGSOXJKDVWZR
EODGHVZLWKRQHZLGHUWKDQWKHRWKHU$JURXQGLQJ WSHSOXJKDVWZREODGHVDQGDWKLUGJURXQGLQJ
SURQJ7KHZLGHEODGHRUWKHWKLUGSURQJDUH SURYLGHGIRURXUVDIHW,IWKHSURYLGHGSOXJGRHV
QRWILWLQWRRXURXWOHWFRQVXOWDQHOHFWULFLDQIRU UHSODFHPHQWRIWKHREVROHWHRXWOHW
3URWHFWWKHSRZHUFRUGIURPEHLQJZDONHGRQRU SLQFKHGSDUWLFXODUODWSOXJVFRQYHQLHQFH
UHFHSWDFOHVDQGWKHSRLQWZKHUHWKHH[LWIURPWKH DSSDUDWXV
2QOXVHDWWDFKPHQWVDFFHVVRULHVVSHFLILHGEWKH PDQXIDFWXUHU 8VHRQOZLWKWKHFDUW
VWDQGWULSRGEUDFNHWRU WDEOHVSHFLILHGEWKH PDQXIDFWXUHURUVROGZLWK
WKHDSSDUDWXV:KHQDFDUW LVXVHGXVHFDXWLRQZKHQ PRYLQJWKHFDUWDSSDUDWXV
FRPELQDWLRQWRDYRLGLQMXU IURPWLSRYHU 8QSOXJWKLVDSSDUDWXVGXULQJOLJKWQLQJVWRUPVRU
ZKHQXQXVHGIRUORQJSHULRGVRIWLPH 5HIHUDOOVHUYLFLQJWRTXDOLILHGVHUYLFHSHUVRQQHO
6HUYLFLQJLVUHTXLUHGZKHQWKHDSSDUDWXVKDVEHHQ GDPDJHGLQDQZDVXFKDVSRZHUVXSSOFRUGRU
SOXJLVGDPDJHGOLTXLGKDVEHHQVSLOOHGRUREMHFWV
KDYHIDOOHQLQWRWKHDSSDUDWXVWKHDSSDUDWXVKDV
EHHQH[SRVHGWRUDLQRUPRLVWXUHGRHVQRWRSHUDWH
QRUPDOORUKDVEHHQGURSSHG
:$51,1*
725(‘8&(7+(5,6.2)),5(25(/(&75,&6+2&.’2127(;326(7+,6$33$5$786725$,12502,6785(
08/HQ
YH-WL500 Owner’s Manual 3
KZOBHQERRN
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of
serious injury or even death from electrical shock, short-circuiting, damages,
fire or other hazards. These precautions include, but are not limited to, the
following:
Power supply
· Do not place the USB cable near heat sources such as heaters or radiators.
Also, do not excessively bend or otherwise damage the cord, or place heavy
objects on it.
· Do not touch the product or the power plug during an electrical storm.
· Use only the correct voltage specified for the product. The required voltage
is printed on the name plate of the product.
· Use the specified USB AC adaptor (page 20).
· Use only the supplied USB cable/plug. Do not use the USB cable/plug for
other products.
· Check the power plug periodically and remove any dirt or dust which may have
accumulated on it.
· Insert the power plug firmly all the way into the AC outlet. Using the
product when it is not plugged in sufficiently can cause dust to accumulate on
the plug, possibly resulting in fire or skin burns.
· When setting up the product, make sure that the AC outlet you are using is
easily accessible. If some trouble or malfunction occurs, immediately turn off
the power switch and disconnect the plug from the outlet. Even when the power
switch is turned off, as long as the USB cable is not unplugged from the wall
AC outlet, the product will not be disconnected from the power source.
· Do not connect the product to an electrical outlet using a multi-plug outlet
extender. Doing so can result in lower sound quality, or possibly cause
overheating in the outlet.
· When disconnecting the power plug, always hold the plug itself and not the
cord. Pulling by the cord can damage it and cause electric shocks or a fire.
· If not using the product for long periods of time, be sure to pull the power
plug from the AC outlet.
Do not disassemble
· This product contains no user-serviceable parts. Do not attempt to
disassemble the internal parts or modify them in any way.
Water warning
· Do not expose the product to rain, use it near water or in damp or wet
conditions, or place on it any containers (such as vases, bottles or glasses)
containing liquids which might spill into any openings or places where water
may drop. A liquid such as water getting into the product may cause a fire,
electric shocks, or malfunctions.
· Use the USB AC adaptor indoors only. Do not use in any wet environments.
· Never insert or remove a power plug with wet hands.
Fire warning
· Do not place any burning items or open flames near the product, since they
may cause a fire.
Wireless unit
· Radio waves from this product may affect electro-medical devices, such as a
heart pacemaker implant or defibrillator implant. – Do not use the product
near medical devices or inside medical facilities. Radio waves from this
product may affect electro-medical devices. – Do not use the product within 15
cm (6 in.) of persons with a heart pacemaker implant or a defibrillator
implant.
4 YH-WL500 Owner’s Manual
DMI-10 1/3
KZOBHQERRN
(Lithium ion) battery
· Do not disassemble this product. Failure to do so might result in battery
fluid leakage. If the contents of the battery get on your hands or in your
eyes, it can cause blindness, chemical burns, and damage to the product.
· Do not dispose of this product in fire. Doing so may result in the battery
bursting, causing a fire or injury.
· Do not expose this product to high temperatures, such as direct sunlight or
a fire. Doing so may result in the battery bursting, causing a fire or injury.
· Do not subject this product to mechanical shock. It may result in damage
caused by batteries, electric shock, or malfunction.
· If the batteries do leak, avoid contact with the leaked fluid. If the
battery fluid should come in contact with your eyes, mouth, or skin, wash
immediately with water and consult a doctor. Battery fluid is corrosive and
may possibly cause loss of sight or chemical burns.
· Do not place this product in a place where the air pressure is extremely
low.
· For details on charging the battery, be sure to read the battery manual and
follow the instructions. Failure to do so may result in fire, overheating,
explosion or malfunction.
If you notice any abnormality
· If any of the following problems occur, immediately turn off the power
switch and disconnect the power plug from the outlet. If you are using
batteries, remove all batteries from the product. Finally have the device
inspected by Yamaha service personnel. – The USB cable or plug becomes frayed
or damaged. – Unusual smells or smoke are emitted. – Some object, or water has
been dropped into the product. – There is a sudden loss of sound during use of
the product. – Cracks or other visible damage appear on the product.
DMI-10 2/3
YH-WL500 Owner’s Manual 5
KZOBHQERRN
CAUTION
Always follow the basic precautions listed below to avoid the possibility of
physical injury to you or others, or damage to the product or other property.
These precautions include, but are not limited to, the following:
Location
· Do not place the product in an unstable position or a location with
excessive vibration, where it might accidentally fall over and cause injury.
Connections
· Before connecting the product to other electronic components, turn off the
power for all components. Also, before turning the power on or off for all
components, set all volume levels to minimum.
· Be sure to set the volumes of all components at their minimum levels and
gradually raise the volume controls while playing the product to set the
desired listening level.
(Lithium ion) battery
· Charge only with a specified charger. Charging with an unspecified charger
may cause leakage, overheating, explosion, or malfunction.
· Charge only within the specified charging temperature range. Charging at a
temperature outside the range may cause leakage, overheating, explosion, or
malfunction.
Handling
· Do not rest your weight on, or place heavy objects on the product, and do
not use excessive force on the buttons, switches or connectors.
· Keep small parts out of the reach of infants or small children who may
accidentally swallow them.
· Do not use the product or headphones for a long period of time at a high or
uncomfortable volume level, since this can cause permanent hearing loss. If
you experience any hearing loss or ringing in the ears, consult a physician.
· If the headphones irritate your skin, stop use immediately.
· Remove the power plug from the AC outlet before cleaning the unit. Failure
to observe this may cause electric shocks.
· Before moving the product, remove all connected cables, to prevent damage to
the cables or injury to anyone who might trip over them.
6 YH-WL500 Owner’s Manual
DMI-10 3/3
KZOBHQERRN
Notices
Battery-related notes
This product contains a lithium-ion battery.
The lithium-ion battery contained in this product is a consumable item. To
extend the life of the battery as long as possible, use caution regarding the
following. · If the product is not used for a long period of time,
the charging time may get longer. · When storing the product for a long time,
charge the
product around once every six months to avoid excessive discharge. · When the
battery fails to hold a charge or only has useful power for a very short time,
the life of the battery is over. · Lithium-ion batteries can be recycled.
After usage, you may recycle the battery, but never attempt to remove it by
yourself. Have the device inspected by qualified Yamaha service personnel. If
there are no Yamaha service personnel in your area, dispose of it properly
according to relevant environmental laws and disposal rules in your area. ·
This product contains a battery that contains perchlorate material.
Perchlorate Material – special handling may apply, See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
Handling this product
· Depending on the condition of surrounding radio waves, the product may
possibly malfunction.
· Always turn the power off when the product is not in use. Even when the [ ]
(power key) switch is in standby status (power LED is off/ status is off),
electricity is still flowing to the product at the minimum level. When you are
not using the product for a long time, make sure you unplug the power cord
from the wall AC outlet.
Maintenance
When cleaning the product, use a soft and dry (or slightly damp) cloth. Do not
use paint thinners, solvents, alcohol, cleaning fluids, or chemical-
impregnated wiping cloths.
Information
About the contents of this document
· This document is an owner’s manual intended for the readers who will use
this product.
· The illustrations and screens as shown in this document are for
instructional purposes only.
· Software may be revised and updated without prior notice.
Trademarks
· The Bluetooth® word mark and logos are regis-
tered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by
Yamaha Corporation is under license. · The company names and product names in
this manual are the trademarks or registered trademarks of their respective
companies.
The graphic below indicates the location of the name plate. The model number,
serial number, power requirements, etc., are located on this plate. You should
note this serial number in the space provided below and retain this manual as
a permanent record of your purchase to aid identification in the event of
theft or loss.
Model No.
Serial No.
(bottom_en_02)
Yamaha cannot be held responsible for damage caused by improper use or modifications to the product.
YH-WL500 Owner’s Manual 7
KZOBHQERRN
Table of Contents
PRECAUTIONS ………………………………………………………………………. 4
Notices ……………………………………………………………………………………………….. 7 Information
…………………………………………………………………………………………. 7
Product Overview ………………………………………………………………….. 9
Main Features ……………………………………………………………………………………… 9 Packing Contents
………………………………………………………………………………… 9 Part Names
……………………………………………………………………………………….. 10
Setting Up …………………………………………………………………………… 11
Connecting the Transmitter to Other Devices by Cables ……………………… 11 When
connecting to a digital musical instrument or audio interface ……………… 11 When
connecting to a guitar amp ……………………………………………………………. 11
Connecting the Power Adaptor ………………………………………………………….. 12 Charging the
Headphones …………………………………………………………………. 12
Basic Operations …………………………………………………………………. 13
Using the Headphones ………………………………………………………………………. 13 Adjusting the Volume
………………………………………………………………………… 13 Checking the Audio Input Status
………………………………………………………… 13 Checking Remaining Battery Power
…………………………………………………… 14 After Using the Headphones ……………………………………………………………….
14 Connecting by Cable …………………………………………………………………………. 14
Advanced Features ………………………………………………………………. 15
Using Simultaneously with Bluetooth Devices ……………………………………. 15 Registering a
Bluetooth device ……………………………………………………………….. 15 Connecting to a Bluetooth
device ……………………………………………………………. 16 Disconnecting from a Bluetooth device
…………………………………………………….. 17
Using Additional Headphones ……………………………………………………………. 17
Troubleshooting …………………………………………………………………… 18 Appendix
…………………………………………………………………………….. 20
Specifications ……………………………………………………………………………………. 20 List of Operations
……………………………………………………………………………… 21 List of Audio Messages and LED Indicator
…………………………………………. 21
Audio messages …………………………………………………………………………………… 21 LED displays
………………………………………………………………………………………… 22
8 YH-WL500 Owner’s Manual
KZOBHQERRN
Product Overview
Main Features
This product is a set of wireless headphones with a companion transmitter. The input jack of the transmitter can be connected to the headphone jack of a device (such as a digital keyboard, guitar amplifier, audio interface, etc.), enabling wireless connection of exceptionally low latency. Since this product can also be connected to a Bluetooth device, you can play your instrument simultaneously along with music playback from your Bluetooth device, such as a smartphone.
Headphone jack
Cable connection
Transmitter
YH-WL500
Wireless connection*
Headphones
Cable connection
Bluetooth
Headphone jack
Guitar amplifier, multi-effect device
Digital musical instrument, keyboard, mixer, audio interface, etc.
Smart device/ Computer
- This is a dedicated connection using Yamaha’s original 2.4 GHz transmitter and achieves exceptionally low delay. A transmission channel is automatically set up simply by removing the headphones from the transmitter.
Packing Contents
Make sure that all of the following are enclosed with this product.
Headphones
Transmitter
3.5 mm stereo mini plug cable (2 m)
Audio conversion plug (stereo mini plug Æ stand-
ard stereo phone plug)
USB power adaptor
Attachment plugs × 6
USB cable (50 cm/type A Æ type C)
Owner’s Manual (this document)
- Select the plug that corresponds to the shape of the AC outlet in your area.
YH-WL500 Owner’s Manual 9
KZOBHQERRN
Product Overview
Part Names
Headphones
w
q Headband
q
w Housing
e Power LED
r Power key
t Bluetooth key
y + key
u – key
i Cable input jack
o Charging LED
!0 USB charging connector
!1 Connector A
Connect to Connector B of the transmitter.
o
i u
y
t re
!0
!1
Transmitter
Rear
!2 10 YH-WL500 Owner’s Manual
!4
!5
!6
!2 Status LED
!3
!3 Connector B
!4 Additional headphones key
!5 Input jack
!6 DC IN
KZOBHQERRN
Setting Up
Connecting the Transmitter to Other Devices by Cables
Before using the headphones, connect the headphone jack of your particular device (digital musical instrument, guitar amp, or audio interface, etc.) to the transmitter’s input jack (stereo mini jack), by using the stereo mini plug cable included with this product.
When connecting to a digital musical instrument or audio interface
When connecting to a guitar amp
Transmitter
Rear
Input jack
Headphone jack
Stereo mini plug cable (included)
Transmitter
Rear
Headphone jack
Guitar amplifier, multi-effect device
Wireless connection
Input jack
Stereo mini plug cable (included)
Cable connection
Digital musical instrument, keyboard, mixer, or audio interface
Use the attached audio conversion plug depending on the headphone jack of your particular device.
3.5 mm stereo mini plug cable
Audio conversion plug
(standard stereo phone plug Æ stereo mini plug)
Example showing wireless transmitter and corresponding amplifier, such as
the Relay G10TII
NOTE
· When using a commercial stereo mini plug cable for connection with the
transmitter, make sure to use one having no (zero) resistance.
YH-WL500 Owner’s Manual 11
KZOBHQERRN
Setting Up
Connecting the Power Adaptor
1. Attach the attachment plug that corresponds to the shape of the AC outlet in your area to the USB power adaptor.
USB power adaptor
Attachment plug
Charging the Headphones
Make sure to charge the headphones before using.
1. Set the headphones on the transmitter. Make sure that connecter A of the
headphones fits securely on connecter B of the transmitter.
Slide the plug as indicated.
For details, refer to the separate “Attachment Plug Converter Table” leaflet.
2. Connect the USB power adaptor in the order shown in the illustration.
Connecter A Connecter B
Blue
Transmitter Rear Type C
USB power adaptor
AC outlet
Type A
If the headphones are set correctly, the status LED of the transmitter flashes
in blue, and then lights continuously in blue. When the status LED does not
light up in blue, check whether connector B of the transmitter is correctly
inserted in connector A of the headphones.
2. Make sure that the charging LED of the headphones is lit up in red.
USB cable
WARNING
· Be sure to use the attached USB power adaptor only. · When using the USB
power adaptor with a removable
plug, make sure to keep the plug attached to the USB power adaptor. Using the
plug alone can cause electric shock or fire. · Never touch the inner metallic
section when attaching the attachment plug to avoid electric shock, short
circuit, or damage. Also, be careful that no dust accumulates between the USB
power adaptor and plug.
NOTE
· To disconnect the USB power adaptor, follow steps 2 q to e in reverse order.
12 YH-WL500 Owner’s Manual
Red
The charging LED lights up in red during charging, and turns off when charging
is completed. The charging LED will not light up when the headphones are
already fully charged.
Setup is now completed.
NOTE
· You may not be able to charge if you use a USB cable other than the one
included with this product.
· You can also charge directly from the AC outlet by connecting the USB cable
with a USB power adaptor instead of setting on the transmitter.
· During charging, no buttons can be used, and wireless connection is
canceled.
KZOBHQERRN
Basic Operations
Using the Headphones
1. Turn on the power of your connected devices. Also in this step, lower the
volume of those devices.
2. Remove the fully charged headphones from the transmitter. The status LED
of the transmitter and the power LED of the headphones flash in blue and a
wireless channel is set up automatically. If successfully connected, you will
hear a “Pairing Successful” audio message, and then the power LED lights
continuously in blue.
Status LED
Flashes in blue
Power LED
Adjusting the Volume
Follow the steps below to adjust the volume.
– key
+ key
· Turning the volume up: Press the + key.
· Turning the volume down: Press the – key.
· Turning the volume up continuously: Hold down the + key.
· Turning the volume down continuously: Hold down the – key.
NOTE
· When volume reaches the maximum, you will hear a “beep” sound.
Transmitter
Flashes in blue
3. Put the headphones on. Check the markings for the left and right sides to make sure the headphones are positioned correctly when you put them on.
Checking the Audio Input Status
While using this product, you can check the status of the audio input from the
status LED of the transmitter.
R
L
4. Adjust the volume of your device as desired.
Status LED Blue Red
When the audio input is too high, the status LED lights up in red. Lower the
volume of the connected device.
YH-WL500 Owner’s Manual 13
KZOBHQERRN
Basic Operations
Checking Remaining Battery Power
While you are using the headphones, you can check how much battery power is
left from an audio message.
Audio message
· Battery Low: small amount of charge remaining
After Using the Headphones
1. When you are finished using the headphones, make sure to turn the power
off by holding down the power key.
Connecting by Cable
By connecting this product directly to a device by cable, you can use it
conventionally without having to use the power supply.
1. Turn the power of this product off by holding down the power key.
2. Lower the volume of your equipment.
3. Connect the headphone jack of your equipment to the input jack of the
headphones by using the 3.5 mm stereo mini-plug cable (included).
Hold down
3.5 mm stereo mini-plug cable
(included)
2. Charge the headphones by setting them on the transmitter (p.12).
4. Adjust the volume of the connected device as desired.
Use the attached audio conversion plug according to the shape of the headphone
jack of your equipment.
14 YH-WL500 Owner’s Manual
NOTE
· The following functions are not available when connecting via cable. –
Adjusting the volume by pressing the + key (or the – key) – Wireless
connection
· When using this product with the cable connected, you cannot use it with the
power turned on. Use the headphones after turning off the power by holding
down the power key.
KZOBHQERRN
Advanced Features
Using Simultaneously with Bluetooth Devices
During wireless connection, you can also listen to music (for example, musical
accompaniment) from a Bluetooth-compatible smart device or computer.
Bluetooth connection
Registering a Bluetooth device
When first connecting this product to a Bluetooth device, follow the steps
below to register this product with that device.
1. Set this product to registration standby mode. With the power turned on,
hold down the Bluetooth key until the power LED flashes as shown in the
illustration below. The headphones will enter registration standby mode.
Wireless connection
Transmitter
Input jack
Rear
Blue
Red
Flashes alternately
Headphone jack
Cable connection
2 sec or more
2. Activate the Bluetooth function on the Bluetooth device. A list of
Bluetooth devices that can be connected will be shown.
3. Select this product from this list on your Bluetooth device.
Digital musical instrument, keyboard, mixer, or audio interface
Start playback of the musical accompaniment from your smart device, after
registering and connecting as a Bluetooth device (described at right). At that
time, adjust the volume of the music from the smart device.
NOTE
· The volume of the music from your smart device via Bluetooth connecting
cannot be adjusted by pressing the + key (or the – key) of this product.
If successfully connected, you will hear a “Connected” audio message.
YH-WL500 Owner’s Manual 15
KZOBHQERRN
Advanced Features
NOTE
· Registration standby mode will automatically end after about thirty seconds.
To register again, start from step 1.
· Up to 8 devices can be registered with this product. From the 9th device on,
older registrations will be deleted (the oldest is deleted first).
· If a passkey is required when connecting, input “0000.”
Connecting to a Bluetooth device
Connect this product to the Bluetooth device with which it has already been
registered.
When you press the Bluetooth key briefly, this product will search for all
previously connected Bluetooth devices, sequentially from the latest
registered one, and will connect it automatically.
CAUTION
· Be sure to set the volume of the Bluetooth device to the minimum level and
gradually raise the volume while playing the Bluetooth device to set the
desired listening level. Failure to do so can damage your hearing.
If this product does not automatically connect to a Bluetooth device, it is
waiting for connection. Make connection from the Bluetooth device itself to
properly connect with this product.
When this product is not able to connect with the Bluetooth devices (a maximum
of eight) connected in the past, the waiting for connection status is once
reset. Briefly press the Bluetooth key again and redo connection from the
beginning of these steps.
If successfully connected, you will hear a “Connected” audio message.
NOTE
· This product connects to a single Bluetooth device, and cannot connect to
multiple devices at the same time.
· When no wireless communications are made for ten minutes and Bluetooth is
disconnected for one minute, the power of the headphones automatically turns
off. In that case, press the power key again to turn on the power.
· The volume of the music from your smart device via Bluetooth connecting
cannot be adjusted by pressing the + key (or the – key) of this product.
Adjust the volume of the music directly from the smart device.
16 YH-WL500 Owner’s Manual
KZOBHQERRN
Advanced Features
Disconnecting from a Bluetooth device
Follow the steps below to disconnect a Bluetooth device.
z Turn the Bluetooth device’s power off.
This product enters a waiting-for-connection status (from a Bluetooth device).
z Turn the power of this product off.
Using Additional Headphones
You can add two or more headphones to a single transmitter, and they can
simultaneously be used wirelessly.
Rear
Transmitter
1. Press the additional headphones key of the transmitter. The status LED of
the transmitter flashes in blue.
Flashes in blue
2. Briefly press the power key on the headphones twice. The power LED of the
headphones flashes in blue and this product starts pairing. The status LED
will light up in blue when pairing is completed.
NOTE
· Currently (as of December, 2022), headphones-only sales are not available.
YH-WL500 Owner’s Manual 17
KZOBHQERRN
Troubleshooting
Read this first
If this product does not operate normally while you are using it, first check
the following.
z Turn the power off and then on again. z Make sure that this product has been
suffi-
ciently charged. · “Charging the Headphones” (p.12)
z Also, check the following.
· “Power will not turn on” (p.18) · “The product cannot be charged” (p.18) ·
“No sound can be heard” (p.18) · “The sound is distorted, noisy or choppy”
(p.18) · “Cannot connect the headphones and the transmit-
ter” (p.19) · “Cannot connect to a Bluetooth device” (p.19) · “The product
does not operate or play back” (p.19) · “Problem still not resolved” (p.19)
Power will not turn on
z There may not be enough battery power left.
Charge this product. · “Charging the Headphones” (p.12)
The product cannot be charged
z Your computer is not turned on (when charging
from your computer). Turn the power of your computer on, and then charge this
product. * Charging from a PC is not guaranteed.
z You may have been using a USB cable other
than the one included with this product. Use the included USB cable to make
sure the product correctly charges.
z Some foreign substance may have accumu-
lated between connectors A and B. Check the connectors and make sure that no
foreign substance has accumulated there.
No sound can be heard
z The headphones are not connected to the
transmitter. Pair this product once again. Set the headphones on the
transmitter once, and remove them after the status LED changes from flashing
in blue to continuously lit in blue (pp. 1213). Otherwise, press the
additional headphones key of the transmitter, and then briefly press the power
key of headphones twice (p.17).
18 YH-WL500 Owner’s Manual
z This product is not connected to a Bluetooth
device. Pair this product. · “Connecting to a Bluetooth device” (p.16)
z The volume is too low.
Raise the volume. · “Adjusting the Volume” (p.13)
z The music stopped playing back.
Start playback of the music from the connected Bluetooth device. · “Using
Simultaneously with Bluetooth Devices” (p.15)
z The cable may not be correctly connected
(when using wireless connection). Connect the 3.5 mm stereo mini-plug cable
jack of this product correctly to your external device. · “Connecting the
Transmitter to Other Devices by
Cables” (p.11)
z The cable containing resistance is being used.
Use the included 3.5 mm stereo mini-plug cable when connecting this product to
a device by cable. If you are using a commercial stereo mini-plug cable, make
sure to use one that has no (zero) resistance.
z The volume of the external device is low when
using wireless connection. Raise the volume on your external device. · “Using
Simultaneously with Bluetooth Devices” (p.15)
z The volume of the external device is low when
connecting to a Bluetooth device. Raise the volume on your external device. ·
“Using Simultaneously with Bluetooth Devices” (p.15)
z The volume of the external device is low when
using a 3.5 mm stereo mini-plug cable. Raise the volume on your external
device. · “Connecting by Cable” (p.14)
The sound is distorted, noisy or choppy
z The signal of wireless connection may not be
coming in clearly, making the connection unstable. Pair this product once
again. Set the headphones on the transmitter once, and remove them after the
status LED changes from flashing in blue to continuously lit in blue (pp.
1213).
z The signal of Bluetooth connection may not be
coming in clearly, making the connection unstable. Move away from wireless
devices such as access points, or appliances that product electromagnetic
waves such as microwave ovens.
KZOBHQERRN
Troubleshooting
Try placing the connected Bluetooth device as close to this product as you
can. Devices with wireless network connectivity may transmit signals that
obstruct Bluetooth communications. In this case, turn off the wireless network
connectivity feature on your Bluetooth device.
The product does not operate or play back
z This product may be charging.
You cannot use this product while it is charging. Use the headphones after
charging is finished.
z There is no remaining battery power on this
product. Charge this product. · “Charging the Headphones” (p.12)
z The product is temporarily not functioning.
Turn the power off and then on again. When it becomes impossible to turn the
power off by normal operation, hold down the power key for about six seconds
or more in order to perform a hardware reset. When the power LED turns off,
the reset operation is complete.
z The 3.5 mm stereo mini-plug cable may be con-
nected. No button operations are possible while using this product with cable
connection. Remove the 3.5 mm stereo mini-plug cable from the headphones.
Cannot connect the headphones and the transmitter
z The headphones and the transmitter may be
too far apart. Move the headphones closer to the transmitter.
z A device that emits electromagnetic waves
(such as a microwave oven, access point and so on) might be nearby. Do not use
this product near other devices that emit electromagnetic waves.
z The signal of wireless connection may not be
coming in clearly Pair this product once again. Set the headphones on the
transmitter once, and remove them after the status LED changes from flashing
in blue to continuously lit in blue (pp. 1213). Otherwise, press the
additional headphones key of the transmitter, and then briefly press the power
key of headphones twice (p.17).
Cannot connect to a Bluetooth device
z This product and your Bluetooth device may be
too far apart. Move this product closer to the Bluetooth device.
z A device that emits electromagnetic waves
(such as a microwave oven, access point and so on) might be nearby. Do not use
this product near other devices that emit electromagnetic waves.
z The connection information for the registered
Bluetooth device may not be working properly. Delete the connection
information of this product from the Bluetooth device, and then pair this
product with the device. · “Registering a Bluetooth device” (p.15)
z The registration information for the Bluetooth
device that was registered on this product may have been deleted. Pair this
product once more. · “Registering a Bluetooth device” (p.15)
z This product may already be connected to
another Bluetooth device. Disconnect that Bluetooth device, and then connect
this product with the new device. · “Disconnecting from a Bluetooth device”
(p.17)
Problem still not resolved
If the trouble still cannot be solved, please contact Yamaha for product
support as shown below.
z For customers within Japan
Please contact the store where you purchased this product, or the Product
Support Center as listed in the included “warranty sheet.”
z For customers outside of Japan
Please contact your nearest authorized Yamaha dealer or service center.
YH-WL500 Owner’s Manual 19
KZOBHQERRN
Appendix
Specifications
Headphones
Driver type: Dynamic, open air / over-ear Driver unit: 40 mm Impedance: 32
Wired input jack: 3.5 stereo mini-jack USB charging connector: USB Type-C (USB
1.1) Weight: 315 g
Bluetooth
Radio frequency: 2402 MHz to 2480 MHz Maximum output power (EIRP): 6.46 dBm
Bluetooth version: 4.2 Supported profiles: A2DP, AVRCP Supported codecs: SBC
Maximum number of pairable devices: 8 SAR observed value: 0.15 w/kg
Transmitter
Input jack: 3.5 stereo mini-jack DC IN: USB Type-C (USB 1.1) Weight: 400 g
Maximum power Consumption:
2.55W (5.1 VDC × 500mA)
Wireless communication functions
Digital format: Original format (equivalent to 24-bit) Radio frequency
(operational frequency):
2402 MHz to 2478 MHz Maximum output power (EIRP): 2.43 dBm Maximum
communication range: 7 m in optimum
conditions, though this may differ depending on the condition of surrounding
radio waves.
Power supply
Rechargeable battery
Internal rechargeable battery: Lithium-ion battery Charging time (to full
capacity):
Approximately 3 hours Charging temperature: +5 to +40 °C Operating
Temperature: 0 to +40 °C Battery run time (continuous playback time):
Approximately 9 hours
USB power adaptor
Model number: UNXBU3012-050020SA Input: 100 VAC to 240 VAC Output: 5.1 VDC/2A
(USB-A)
- The contents of this manual apply to the latest specifications as of the printing date. To obtain the latest manual, access the Yamaha website, and then download the manual file.
Information for users on collection and disposal of old equipment:
This symbol on the products, packaging, and/or accompanying documents means
that used electrical and electronic products should not be mixed with general
household waste. For proper treatment, recovery and recycling of old products,
please take them to applicable collection points, in accordance with your
national legislation. By disposing of these products correctly, you will help
to save valuable resources and prevent any potential negative effects on human
health and the environment which could otherwise arise from inappropriate
waste handling. For more information about collection and recycling of old
products, please contact your local municipality, your waste disposal service
or the point of sale where you purchased the items.
For business users in the European Union: If you wish to discard electrical
and electronic equipment, please contact your dealer or supplier for further
information.
Information on Disposal in other Countries outside the European Union: This
symbol is only valid in the European Union. If you wish to discard these
items, please contact your local authorities or dealer and ask for the correct
method of disposal.
(58-M02 WEEE en 01)
20 YH-WL500 Owner’s Manual
KZOBHQERRN
Appendix
List of Operations
The main operations of this product are as shown below.
– key
Bluetooth key
+ key
Power key
Power
Power on
Power key
Power off
Power key (hold down for one second)
Volume
Volume up
+ key
Volume down
– key
Volume up continuously
+ key (hold down)
Volume down
– key (hold down)
continuously
Wireless communication
Start pairing
Power key (twice)
Bluetooth
Start registration Bluetooth key (hold down)
Start connecting Bluetooth key
List of Audio Messages and LED Indicator
Audio messages
The audio messages on this product are shown below.
Power
Power Off
Power off
Battery
Battery Low
Battery Low
Wireless communication
Pairing Successful Pairing Successful
Finished connecting
Pairing Failed
Pairing unsuccessful
Bluetooth
Connected
Finished connecting to Blue-
tooth device
Finished connecting again
Disconnected
Disconnected from Bluetooth device
Disconnected by the condition
of surrounding radio waves
YH-WL500 Owner’s Manual 21
KZOBHQERRN
Appendix
LED displays
The LED displays on this product are shown below.
Power LED
Headphones
Charging LED
Status LED
Transmitter
Blue Red
Power LED
Power on Power off
Power
Lights up (blue)
Blue
Lights off
Wireless communication
With no abnor- Lights up (blue) malities
Blue
Communication Flashes for one
error
minute (red)
Red
Searching for Flashes (blue)
paired Bluetooth device
for less than
about 10 sec-
Blue
onds
Bluetooth
Standby mode for pairing with Bluetooth device
Flashes (between red and blue alternately)
Blue Red
Farmware update
Updating
Flashes (between red and blue alternately)
Blue Red
Charging LED
Under charge
Battery
Lights up (red)
Red
Finished charg- Lights off ing
Status LED
Power on Power off
Power
Lights up (blue)
Blue
Not lit
Audio input
An audio input is Lights up (red) too large
Red
Wireless communication
With no abnor- Lights up (blue) malities
Blue
Searching for Flashes (blue)
RSSI frequency Æ Lights up
Blue
(when setting (blue)
the headphones
Blue
to transmitter)
Searching for Flashes for 20
radio channels seconds (blue)
(when removing
Blue
the headphones
from transmitter)
Standby mode for Flashes for two
pairing with the minutes (blue)
headphones
Blue
(when holding
down the addi-
tional key)
Farmware update
Updating
Flashes (between red and blue alternately)
Blue Red
22 YH-WL500 Owner’s Manual
KZOBHQERRN
MEMO
YH-WL500 Owner’s Manual 23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>