Polaroid 9046 2×3 Pocket Photo Printer User Guide
- June 5, 2024
- Polaroid
Table of Contents
Polaroid 9046 2×3 Pocket Photo Printer User Guide
Product Overview
A Photo Eject Slot
B Cartridge Door
C USB Charging Slot
D ON|OFF Button
E Power LED
F Bluetooth® LED
G Reset Button
H Charging LED
Hi, let’s get you started
How to print your first photo
- Charge the Polaroid Hi-Print pocket photo printer using the micro USB cable.
- Download the free Polaroid Hi-Print mobile app from the App Store or Google Play Store. This device only works with the mobile app.
- Open the cartridge door on the side of the printer.
- Insert the cartridge. It only uses Polaroid Hi-Print 2×3 Paper Cartridges. Close the cartridge door.
- Turn on the printer by pressing down the ON | OFF button for 1 second. The Bluetooth LED will blink blue. It’s now ready to be paired with your phone.
- Go to Bluetooth settings on your phone. Turn Bluetooth o and select the Polaroid HiPrint pocket photo printer with your unique device ID. You will find that ID on the inside of the cartridge door. Once it’s paired with your phone, the Bluetooth LED will stop blinking.
- Open the Polaroid Hi-Print app on your phone. Follow the instructions to print your first photo.
- When your photo prints, the paper will move in and out 4 times to print each color separately, along with an overcoat. This protects it from fingerprints, fading, and water splashes. Do not touch the ink foil or pull on the paper while it’s printing.
The Polaroid Hi·Print app
Turn your moments into fade-proof photographs with the free Polaroid Hi·Print
mobile app.
Download to your phone and follow the simple steps to print your life
highlights in high quality.
Available from the Apple App Store or Google Play Store.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google LLC. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Polaroid Film B.V. is under license
Warranty
You can find the warranty for the Polaroid Hi·Print app photo printer here: polaroid.com/warranty
Need some help?
The power LED blinks red.
This means no cartridge has been inserted. Insert a Polaroid Hi-Print 2×3
Paper Cartridge and try again.
There’s a paper jam.
Turn the printer off then on again. The paper should eject automatically. If
not, please contact our customer service team.
The printer isn’t responding.
Make sure the printer is fully charged. Otherwise, press the reset button. You
will find this small hole next to the charging port. You will need something
fine and sharp, like a safety pin, to depress and reset the device.
Have a problem, or a question you need answered?
USA/Canada
[email protected]
+1-212-219-3254
or visit polaroid.com/help
Contact our Customer Support Team
EU/Rest of World
[email protected] 00800 5770 1500