YAMAHA R-N1000A Receiver Ampli-Tuner HiFi User Guide
- October 30, 2023
- Yamaha
Table of Contents
YAMAHA R-N1000A Receiver Ampli-Tuner HiFi
Product Information: Receiver Ampli-Tuner Hi-Fi
The Yamaha Receiver Ampli-Tuner Hi-Fi is a two-channel stereo amplifier that is network-compatible and allows you to play music content from the radio or a network in your home. The product has analog and digital audio inputs and comes with a YPAO function that optimizes the sound field automatically according to your room, providing an enjoyable listening experience.
The product comes with a Safety Guide, Quick Guide, and User Guide. The Safety Guide lists important safety precautions that should be read prior to use. The Quick Guide explains basic connections, playback of Internet radio, and more. The User Guide explains all functions and provides information not explained in the Quick Guide. The User Guide is provided only on the website.
The package includes a power cord, YPAO microphone, AM antenna (Except for U.K., Europe, Russia and Australia models), FM antenna (Except for U.K., Europe, Russia and Australia models), remote control, Safety Guide, Quick Guide (this manual), and DAB/FM antenna (U.K., Europe, Russia and Australia models). Items marked with * are not explained in this guide. See the User Guide for more information.
Product Usage Instructions:
PREPARATION
Checking the included accessories
Check and make sure that you have all the following items:
- Power cord
- YPAO microphone
- AM antenna (Except for U.K., Europe, Russia and Australia models)*
- FM antenna (Except for U.K., Europe, Russia and Australia models)*
- Remote control*
- Safety Guide
- Quick Guide (this manual)
- DAB/FM antenna (U.K., Europe, Russia and Australia models)*
Items marked with * are not explained in this guide. See the User Guide for more information. Be sure to fill in the correct date of purchase and name of the store of purchase in the warranty, and then keep it in a safe place.
This guide requires the following items
Have the following items on hand, in addition to the product:
- Subwoofer (built-in amp)*
- Monaural pin cable (RCA)*
- Wireless router
- AndroidTM or iOS smartphone or tablet (smart device)
- Stand for holding the YPAO microphone*
Connecting Speakers
Connect your speakers to the product using speaker cables. Connect the positive (+) terminal of the speaker to the positive (+) terminal of the product, and connect the negative (-) terminal of the speaker to the negative (-) terminal of the product.
Flipping up the wireless antenna
Flip up the wireless antenna on the back of the product.
Connecting the power cord
Connect the power cord to the product and plug it into a power outlet.
OPERATION
Turning the power on
Press the power button on the remote control or on the front panel of the product to turn it on.
Automatic adjustment of speaker settings (YPAO)
Place the YPAO microphone at your listening position and connect it to the YPAO MIC jack on the back of the product. Press the YPAO button on the remote control to start the automatic adjustment of speaker settings. Follow the instructions displayed on the screen to complete the process.
Configuring network settings
Connect the product to your wireless router using a LAN cable. Press the NET button on the remote control to access the network menu. Follow the instructions displayed on the screen to configure your network settings.
Playing Internet radio
Press the NET button on the remote control to access the network menu. Select “Internet Radio” and then select a station from the list. Press the play button to start playing.
Introduction
Thank you very much for purchasing this Yamaha product.
This product is a network-compatible Receiver (2 channel stereo amplifier)
which lets you play music content from the radio or a network in your home as
well as analog and digital audio inputs. With the YPAO function which
optimizes the sound field automatically, you can enjoy the sound that best
matches your room.
About the Manuals
Please be sure to read the following guides. Keep the guides that are included with the product in a handy place for easy reference.
-
Safety Guide (included with the product)
Lists important safety precautions that should be read prior to use. -
Quick Guide (this manual)
This guide explains basic connections, playback of Internet radio, and more. -
User Guide (Web)
This explains all functions, such as information not explained in the Quick Guide. To see the User Guide, go to the following URL. Please note that the User Guide is provided only on the website.
https://manual.yamaha.com/av/22/rn1000a/
PREPARATION
Checking the included accessories
Check and make sure that you have all the following items.
Items marked with * are not explained in this guide. See the User Guide for
more information.
Be sure to fill in the correct date of purchase and name of the store of
purchase in the warranty, and then keep it in a safe place.
This guide requires the following items
Have the following items on hand, in addition to the product.
Items marked with * are not required in some cases. Have them ready if needed.
Connecting Speakers
Connect the speakers as illustrated. Connect a subwoofer if needed.
-
Peel back about 10 mm of insulation from the end of the speaker cable and twist the core wires tightly.
-
Turn the knob of the speaker jack to the left to loosen it, and insert the core wires of the speaker cable into the hole of the jack.
-
Turn the knob back to the right to tighten it.
NOTE
- Use speakers with an impedance of 4-ohms or higher.
- If using 4-ohm speakers (or higher than 4-ohm but lower than 8- ohm), change the impedance settings of this product. These settings can be changed in the product’s Advanced Setup menu. See the User Guide for details.
NOTICE
NOTICE is used with information for preventing product failure, damage or
malfunction.
Do not allow the core wires of a speaker cable to touch the core wires of another speaker cable or any metal parts of the product. Doing so may damage the product and/or the speakers.
Flipping up the wireless antenna
Flip up the wireless antenna as illustrated.
NOTICE
Do not exert excessive force on the wireless antenna. Doing so may damage it.
Connecting the power cord
Connect the included power cord.
OPERATION
Turning the power on
Turn the product on.
-
Press the (Power) switch to turn the power on.
The power indicator lights up. -
After the following message appears on the front display, press RETURN on the front panel to clear the message.
It may take about 30 seconds for the message to appear. The portion shown as * differs depending on the device.
Wireless WAC Display
The WAC (Wireless Accessory Configuration) function is for applying the
wireless settings of an iOS device to another device and wirelessly connecting
to the network. Because it is explained on a later page how to connect to
networks with the MusicCast Controller app, how to cancel WAC is explained
here.
Automatic adjustment of speaker settings (YPAO)
Use the included YPAO microphone and run YPAO.
YPAO is a function that detects speaker connections and the distance from the
listening position, then automatically adjusts the speaker settings, such as
volume balance and tone.
- Turn your subwoofers on and adjust the volume to its midpoint.
If the crossover frequency can be adjusted, set it to the maximum.
This step is not necessary if a subwoofer is not connected.
- Put the included YPAO microphone in the listening position and connect it to the YPAO MIC jack on the front panel.
The following message appears on the front display.
NOTE
Secure the YPAO microphone in place so it does not move. If a camera tripod is
used for the microphone, its screws can be used to secure the microphone.
-
Press SELECT on the front panel to start the automatic adjustment of speaker settings with YPAO.
Adjustment starts automatically after about 10 seconds. It takes about 1 minutes. Do not make any unnecessary noise until the adjustments are complete. -
Check the results on the front display.
After all adjustments are complete, the results are shown on the front display. Follow the instructions that are displayed, and use the SELECT buttons to complete adjustments.
If there are no errors or warnings:
If an error message or warning message appears on the display, refer to the
User Guide.
https://manual.yamaha.com/av/22/rn1000a/q1ypao.html
- Save the YPAO results.
Check the following display, and press SELECT to save the adjustment results.
To cancel or readjust (Retry), turn SELECT to choose the desired item.
- Remove the YPAO microphone from the YPAO MIC jack.
After checking the following display, disconnect the YPAO microphone.
This completes the YPAO settings.
Configuring network settings
After installing the dedicated smart-device app, “MusicCast Controller”,
connect the product wirelessly to your network from the screen of the app.
-
Prepare your smart device.
Refer to the Wi-Fi settings of the smart device and confirm that it is connected to the network of your wireless router. -
Install “MusicCast Controller” on your smart device.
Search for “MusicCast Controller” on the App Store or Google Play to download the app. -
**Start the app and start configuring settings as directed by the app.
**
Important Notice about Information Security For details, go to the URL at right.
https://manual.yamaha.com/av/policy/mcc/
NOTE
- You can also connect to the network via a wired connection. See the User Guide for more information.
- If you want to cancel the configuration before it is complete, press RETURN on the front panel.
- If the connection fails, quit the app, and then try again from Step 3.
Playing Internet radio
Use the app to confirm that you can play Internet radio.
- On the app’s screen, select the room that is registered to this product, and select “Net Radio” as the source to play.
If you are connected to the Internet, a list of Internet radio stations appears. If it does not appear, reconnect to the Internet.
-
Choose the desired station.
Choose the desired station from the list of Internet radio stations. -
Adjust the volume.
Adjust with the volume slider in the app. You can also adjust it with VOLUME on the front panel.
This completes the initial setup
For detailed explanations of how to connect various external devices or to
configure advanced settings of the product, refer to the User Guide.