Neomounts LED-W560 TV Mount Instructions Manual
- June 9, 2024
- Neomounts
Table of Contents
Neomounts LED-W560 TV Mount
**PARTS
**
How to Mount the Stand
The steps are the following:
STEP 1 (A)
Install the wall plate on a wooden stud
STEP 1 (B)
Install the wall plate on a solid brick or concrete wall
STEP 2
Install the adapter brackets
Option
Use spacers if necessary
STEP 3
Attach the screen to the bracket
CAUTION
- Run the cable through the cable cover and adjust the mount to your desired position to ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquakes or typhoons.
- It is recommended that the mount be installed by quailed personnel only.
- At least two persons are needed to install or remove the product to avoid the hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity, or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted Surfaces
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure a safe installation, first check the structure of the wall, ceiling, or floor and select a secure mounting location.
- The wall, ceiling, or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earthquakes or other strong shocks.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling, or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling, or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions
FAQ’s
How much space does a monitor mount need?
We recommend allowing 3 to 4 inches of space behind the desk in order to fully utilize the regular Jarvis Monitor Arm’s range of motion. The Dual Jarvis Monitor Arm needs at least 7 inches of space in order to bring the monitors closely together over the desktop.
How can I stop the monitor arm from tilting?
If your monitors are dropping too low, you can tighten the tension by rotating anticlockwise in the direction of the “+” symbol.
Exist high-quality monitor wall mounts?
By mounting the monitor on the wall, you may look up while working instead of directly at the screen, which relieves strain on the vertebrae in your neck and back. Additionally, it helps to enhance sitting posture for greater wellness all around.
Are monitor mounts shipped with screws?
The monitor is missing the screws; however, the mounting bracket that works with the 100mm VESA mounting points should also have them, if you are lacking any screws.
Are the monitor mounting sizes consistent?
The VESA standard is one that is used to attach flat screens, LCD displays, monitors, and televisions on TV or monitor stands.
The Monitor Mount: Can it damage my desk?
Make sure the monitor is evenly distributed while attaching it. Again, if the desk isn’t sturdy enough, you face the risk of getting hurt.
How come a monitor mount is used?
A monitor arm allows you to put the monitor in the most comfortable position by adjusting the monitor’s height, depth, and, in most cases, tilt.
What benefits can using monitor arms provide?
A monitor arm allows you to put the monitor in the most comfortable position by adjusting the monitor’s height, depth, and, in most cases, tilt.
What benefit does the monitor arm provide?
It is typically clamped to the back of your desk. As you can see, employing a monitor arm has the benefit of enabling you to move your computer monitor screen in order to alter its proximity to your hands, eyes, and keyboard.
Can a monitor be installed without studs?
Conical or expanding anchors are among the simplest ways to attach a television when studs are not accessible.
How many different mounting types are there?
Dry mounting, wet mounting, and ready mounting are the three accepted methods for creating a mount.
Do all display mounts work with all monitors?
In most circumstances, most displays can be mounted on a monitor arm, giving you a quick answer. There are the typical VESA hole patterns of 75 x 75 mm or 100 x 100 mm for connection to a monitor arm on the back of the display.
How do I choose the right monitor mount?
To check if your computer monitor complies with VESA specifications, simply glance at the back. If your display complies, you should be able to see the conventional four-hole screw pattern there. Larger monitors will feature 200 x 100 mm screw holes, whereas 75 x 75 mm or 100 x 100 mm screw hole designs are the most common.
Download this PDF Link:Neomounts LED-W560 TV Mount Instructions Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>