Yamaha R-N1000A Receiver Ampli-Tuner Hi-Fi Receptor User Guide

October 30, 2023
Yamaha

R-N1000A Receiver Ampli-Tuner Hi-Fi Receptor
User Guide

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE USE.
BE SURE TO FOLLOW THESE INSTRUCTIONS.

The precautions listed below are to prevent risk of harm to the user and others, as well as to prevent property damage, and to help the user use this unit properly and safely. Be sure to follow these instructions.
After reading this manual, be sure to keep it in a safe place where it can be referenced at any time.

  • Be sure to request inspections or repairs from the dealer where you purchased the unit or from qualified Yamaha service personnel.
  • Yamaha cannot be held responsible for injury to you or damage of the products caused by improper use or modifications to the unit, or data that is lost or destroyed.
  • This product is for ordinary homes. Do not use for applications requiring high reliability, such as managing lives, health care or high-value assets.

WARNING
This content indicates “risk of serious injury or death.”
If you notice any abnormality

  • If any of the following abnormalities occur, immediately turn off the power and disconnect the power plug.
    – The power cord/plug is damaged.
    – An unusual smell, unusual sound or smoke is emitted from the unit.
    – Foreign material or water gets into the interior of the unit.
    – There is a loss of sound during use.
    – There is a crack or damage in the unit.
    Continued use could cause electric shocks, a fire, or malfunctions. Immediately request an inspection or repair from the dealer where you purchased the unit or from qualified Yamaha service personnel.

Power supply

  • Do not do anything that could damage the power cord.
    – Do not place it near a heater.
    – Do not bend it excessively or alter it.
    -Do not scratch it.
    – Do not place it under a heavy object.
    Using the power cord with the core of the cord exposed could cause electric shocks or a fire.

  • Do not touch the power plug or cord if there is a chance of lightning. Failure to observe this may cause electric shocks.

  • Use this unit with the power supply voltage printed on it.
    Failure to connect to an appropriate AC outlet may cause a fire, electric shocks, or malfunctions.

  • Be sure to use the supplied power cord.
    Failure to observe the above may cause a fire, burns, or malfunctions.

  • Do not use the supplied power cord for other units.
    Failure to observe the above may cause a fire, burns, or malfunctions.

  • Check the electric plug periodically and remove any dirt or dust which may have accumulated on it.
    Failure to observe this may cause a fire or electric shocks.

  • When setting up the unit, make sure that the AC outlet you are using is easily accessible.
    If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the AC outlet. Even when the power switch is turned off, as long as the power cord is not unplugged from the wall AC outlet, the unit will not be disconnected from the power source.

  • If you hear thunder or suspect approaching lightning, quickly turn off the power switch and pull the power plug from the AC outlet.
    Failure to observe this may cause a fire or malfunctions.

  • If not using the unit for long periods of time, be sure to pull the power plug from the AC outlet.
    Failure to observe this may cause a fire or malfunctions.

Do not disassemble

  • Do not disassemble or modify this unit.
    Failure to observe this may cause a fire, electric shocks, injury, or malfunctions.

Water warning

  • Do not expose the unit to rain, use it near water or in damp or wet conditions, or place on it any containers (such as vases, bottles or glasses) containing liquids which might spill into any openings or places where water may drop. A liquid such as water getting into the unit may cause a fire, electric shocks, or malfunctions.
  • Never insert or remove an electric plug with wet hands. Do not handle this unit with wet hands.
    Failure to observe this may cause electric shocks or malfunctions.

Fire warning

  • Do not place any burning items or open flames near the unit, since they may cause a fire.

Handling caution

  • Be careful not to drop or apply strong impact to this unit.
    Failure to observe this may cause electric shocks, a fire, or malfunctions.

Battery use

  • Do not disassemble a battery. If the contents of the battery get on your hands or in your eyes, it can cause blindness or chemical burns. Doing so may result in the battery bursting, causing a fire or injury.

  • Do not dispose of a battery in fire.
    Do not expose the battery to conditions of extreme low air pressure, cold or heat (such as in direct sunlight or a fire) or excessive dust or humidity.

  • Doing so may result in the battery bursting, causing a fire or injury.

  • Do not attempt to recharge batteries that are not intended to be charged.
    Charging could cause the battery to burst or leak, which can cause blindness, chemical burns, or injury.

  • If the batteries do leak, avoid contact with the leaked fluid.
    If the battery fluid should come in contact with your eyes, mouth, or skin, wash immediately with water and consult a doctor. Battery fluid is corrosive and may possibly cause loss of sight or chemical burns.

Wireless unit

  • Do not use this unit near medical devices or inside medical facilities.
    Radio waves from this unit may affect electro-medical devices.

  • Do not use this unit within 15 cm (6 in) of persons with a heart pacemaker implant or a defibrillator implant.
    Radio waves from this unit may affect electro-medical devices, such as a heart pacemaker implant or defibrillator implant.

CAUTION

This content indicates “risk of injury.”
Power supply

  • Do not use an AC outlet where the power plug fits loosely when inserted.
    Failure to observe this may cause a fire, electric shocks, or burns.

  •  When disconnecting the power plug, always hold the plug itself and not the cord.
    Pulling by the cord can damage it and cause electric shocks or a fire.

  •  Insert the power plug firmly all the way into the AC outlet.
    Using the unit when it is not plugged in sufficiently can cause dust to accumulate on the plug, causing a fire or burns.

Installation

  • Do not place the unit in an unstable position where it might accidentally drop or fall over and cause injuries.

  • When installing this unit, do not obstruct heat dissipation.
    – Do not cover it with any cloth.
    – Do not install it on a carpet or rug.
    – Do not block this unit’s ventilation holes (cooling slits).
    – Do not install the unit in other ways than indicated.
    – Do not use the device in a confined, poorly-ventilated location.
    Failure to observe the above may trap heat inside the unit, causing a fire or malfunctions. Ensure that there is adequate space around the unit: at least 30 cm
    (11-3/4 in) on top, 20 cm (7-7/8 in) on the sides, and 20 cm (7-7/8 in) on the rear.

  • Do not install the unit in places where it may come into contact with corrosive gases or salt air or places that have excessive smoke or steam.
    Doing so may result in malfunction.

  • Avoid being near the unit during a disaster, such as an earthquake.
    Since the unit may turn over or fall and cause injury, quickly move away from the unit and go to a safe place.

  • When transporting or moving the unit always use two or more people.
    Attempting to lift the unit by yourself may damage your back, result in other injury, or cause damage to the unit itself.

  • Before moving this unit, be sure to turn off the power switch and disconnect all connection cables.
    Failure to observe this may damage the cables or cause you or someone else to trip and fall.

  • For proper installation of outdoor antenna, make sure to have it done by the dealer from where you purchased the unit or by qualified service personnel.
    Failure to observe this may cause the installation to fall and result in injury. Installation requires special skills and experience.

Hearing loss

  • Do not use the unit for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician.

  •  Before connecting the unit to other devices, turn off the power for all devices. Also, before turning the power of all devices on or off, make sure that all volume levels are set to the minimum.
    Failing to do so may result in hearing loss, electric shock, or device damage.

  • When turning on the AC power in your audio system, always turn on the unit LAST, to avoid hearing loss and speaker damage. When turning the power off, the unit should be turned off FIRST for the same reason.
    Failure to observe the above may cause hearing impairment or speaker damage.

Maintenance

  • Remove the power plug from the AC outlet before cleaning the unit.
    Failure to observe this may cause electric shocks.

Handling caution

  • Do not touch the surface having this label.
    Doing so may cause burns. The label on the device indicates that the surface to which the label is attached may become hot during operation.

  •  Do not insert foreign materials such as metal or paper into the openings of this unit.
    Failure to observe this may cause a fire, electric shocks, or malfunctions.

  • Keep small parts out of the reach of infants.
    Your children may accidentally swallow them.
    • Do not do the following:
    – stand on or sit on the equipment.
    – put heavy items on top of the equipment.
    – place the equipment in a stack.
    – apply unreasonable force to buttons, switches, input/output terminals, etc.
    Failure to observe this may cause injuries or damage to the equipment.

  • Avoid pulling the connected cables to prevent injuries or damage to the unit by causing it to fall.

Battery use

  • Do not use batteries other than specified batteries.
    Doing so may cause fire or burns, or result in fluid leakage that may cause skin inflammation.

  • Do not use new batteries together with old ones.
    Using new ones with old ones could cause a fire, burns, or inflammation due to fluid leaks.

  • Do not mix battery types, such as alkaline batteries with manganese batteries, or batteries from different makers, or different types of batteries from the same maker, since this can cause a fire, burns, or inflammation due to fluid leaks.

  • Keep batteries away from children.
    A child could accidentally swallow a battery. Failure to observe this may also cause inflammation due to battery fluid leaks.

  • Do not put in a pocket or bag, carry, or store batteries together with pieces of metal.
    The battery could short, burst, or leak, causing a fire or injury.

  • Always make sure all batteries are inserted in conformity with the +/- polarity markings.
    Failure to do so might result in a fire, burns, or inflammation due to fluid leaks.

  •  When the batteries run out, or if the unit is not to be used for a long time, remove the batteries from the remote control to prevent possible leakage of the battery fluid.

  • When storing or discarding batteries, insulate the terminal area by applying tape, or some other protection.
    Mixing them with other batteries or metal objects can cause a fire, burns, or inflammation due to fluid.

Notice

Indicates points that you must observe in order to prevent product failure, damage or malfunction and data loss.
Power supply

  • If not using the unit for a long period of time, be sure to pull the power plug from the outlet. Even if you place the unit in standby mode by pressing the z (Standby/ On) key on the remote control, a small amount of current still flows through the unit.

Installation

  • Do not use this unit in a location that is exposed to direct sunlight that becomes extremely hot, such as near a heater, or extremely cold, or that is subject to excessive dust or vibration. Failure to observe this may cause the unit’s panel to become deformed, the internal components to malfunction, or for operation to become unstable.
  • If using a wireless function, avoid installing this unit near metal walls or desks, microwave ovens, or other wireless network devices. Obstructions could shorten the transmission distance.

Connections

  • Do not connect this product to public Wi-Fi and/or Internet directly. Only connect this product to the Internet through a router with strong password-protections. Consult your router manufacturer for information on optimum security practices.

  • If connecting external units, be sure to thoroughly read the manual for each unit and connect them in accordance with the instructions.
    Failure to properly handle a unit in accordance with the instructions could cause malfunctions.

  • Do not connect this unit to industrial units.
    Digital audio interface standards for consumer use and industrial use are different.
    This unit has been designed to connect to a consumer-use digital audio interface.
    Connections to an industrial-use digital audio interface could not only cause this unit to malfunction, but could also damage the speakers.

Handling

  • Do not place vinyl, plastic, or rubber products on this unit. Failure to observe this may cause discoloration or deformation in the panel of this unit.
  • If the ambient temperature changes drastically (such as during unit transportation or under rapid heating or cooling) and there is a chance condensation may have formed in the unit, leave the unit for several hours without turning on the power until it is completely dry before use. Using the unit while there is condensation can cause malfunctions.

Maintenance

  • When cleaning the unit, use a dry, soft cloth. Using chemicals such as benzine or thinner, cleaning agents, or chemical scrubbing cloths can cause discoloration or deformation.

Disposal or transfer

  • Before you transfer ownership or dispose of this product, initialize the product settings to default. If you transfer ownership or dispose of this product without initializing the settings, your personal data may be stolen by a third party.
  • If you plan to transfer ownership of this product, include this document and the supplied accessories along with the product.
  • Follow the rules of your local authority to dispose of this product and its accessories.
  • Follow the rules of your local authority to dispose of used batteries.

Information

About the name plate of the unit
The model number, serial number, power requirements, etc., may be found on or near the name plate, which is at the rear of the unit. You should note this serial number in the space provided below and retain this manual as a permanent record of your purchase to aid identification in the event of theft.
Model No…….
Serial No…………….
About content in this manual

  • The illustrations and screens in this manual are for instructional purposes only.
  • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.
  • Software may be revised and updated without prior notice.

Wireless communication functions [U.K. and Europe models] Bluetooth
Radio Frequency:
2401 MHz to 2481 MHz
Maximum Output Power (EIRP): 7.27 dBm
Wi-Fi (2.4 GHz)
Radio Frequency: 2402 MHz to 2482 MHz
Maximum Output Power (EIRP): 19.99 dBm
Wi-Fi (5 GHz)
Radio Frequency, Maximum Output Power (EIRP):
5170 to 5250MHz, 22.77 dBm
5250 to 5330MHz, 22.84 dBm
5490 to 5710MHz, 23.88 dBm
5735 to 5835MHz, 13.94 dBm

  • Wireless devices transmitting over a 5 GHz frequency band can only be used indoors. Use of such devices outdoors is prohibited by law.

Information for users on collection and disposal of old equipment and used batteries:
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with your national legislation.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.
** For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.
For business users in the European Union:
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union:
These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the EU Battery Directive for the chemical involved.
Wireless devices transmitting over a 5 GHz frequency band can only be used indoors. Use of such devices outdoors is prohibited by law.
SIMPLIFIED EU DECLARATION OF CONFORMITY / SIMPLIFIED UK DECLARATION OF CONFORMITY**
Hereby, Yamaha Music Europe GmbH declares that the radio equipment type [R-N1000A] is in compliance with Directive 2014/53/EU and the radio equipment regulations of UK. The full texts of the EU declaration of conformity and the UK declaration of conformity are available at the following internet address: https://europe.yamaha.com/en/support/compliance/doc.html

AT CZ FR IE LU PT ES LI MK
BE DK DE IT MT RO SE NO TR
BG EE EL LV NL SK MD CH ME
CY Fl HU LT PL SI IS HR RS

Yamaha Global Site https://www.yamaha.com/
Yamaha Downloads https://download.yamaha.com/
©2023 Yamaha Corporation
Published 05/2023
NVEM-A0
VFV0960

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals