AUTHENTREND ATKey Card NFC User Guide
- May 15, 2024
- AUTHENTREND
Table of Contents
User Guide for ATKey Card NFC
ATKey Card NFC
*Please check PC (Windows, Mac) user guide separately!
https://authentrend.com/atkeycardnfc_user_guide_pc/
- ISO/IEC 14443 Mifare Type-A 13.56MHz contactless Smart card, without battery.
- Dimension: 85 x 54 x 0.8mm, meet ISO/IEC 7810 spec.
- FIDO2 CTAP2.1 certified: Device-bound (Hardware) Passkey.
Applications
https://authentrend.com/download/ATKey_for_MSFT_AzureAD_guide.pdf
https://authentrend.com/atkey-login/
Recommendations Take the card by “enrolled” thumb finger
(on fingerprint sensor sear) and index finger (on back) iPhone is fixed location
For Android, please turn NFC ON from settings, and normally MFC Antenna is on
back side, please check your Android Phone brand and model to make sure the
NFC antenna location
Download APP: “SecurityKey NFC”
https://play.google.com/apps/testing/com.authentrend.security_key_nfc
Please apply Android App public testing below to get “SecurityKey NFC” app for Android:
- Join through your Android device: https://play.google.com/store/apps/details?id=com.authentrend.security_key_nfc
- Join through network: https://play.google.com/apps/testing/com.authentrend.security_key_nfc
We recommend to check video here as step-by-step guide: https://www.youtube.com/watch?v=2APP6j7TIrg&t=4s (iOS version)
Step1: Activate Card
- Launch “SecurityKey NFC” app
- Click “Manage”, then tap card on Phone NFC Antenna area
- iOS: NFC ON is automatically
- Android: NFC ON/OFF is manually, please turn it on from Settings
- Unique serial number inside each card; it may also prints on card surface (beside FIDO logo)
- Mifare Type A UUID, for Mifare reader (door access control)
- Remaining sign-in data you still can register (to those Passkey enabled services); here only records registered as “FIDO2 Security key””, U2F is not recorded to counter.
Step2: Reset
- Reset to factory state, it does not need user’s PIN code or Fingerprint authentication
- Click “Reset”, then tap the card on NFC Antenna area
Step3: Setup PIN code
- Setup PIN code to the card, then you can enroll fingerprint
- PIN is only for card management, not for authentication
- Fingerprint failed continuously, user can’t login by typing PIN code instead of biometrics verifications.
Step3-1: Configure PIN Policy
- We allow user to configure the PIN code policy
- Change PIN code
- User can change PIN code (after PIN verified),or the card setup by Admin (with PIN code) but force to change at 1st time use
- PIN Policy
- Force PIN Change at next usage –normally this is admin feature to avoid any unexpected modification during delivery or transportation to employees
- Admin can request minimum PIN length for security
Step4: Enroll Fingerprint
- Click “Fingerprint”
- If it’s new card w/o fingerprint enrolled, type in PIN code to enroll fingerprint
- If the card with fingerprint enrolled, verified by fingerprint or type-in PIN code to continue
Step5: Manage Sign-in Data
- Click “Sign-in Data”
- Verify by fingerprint or PIN to continue
- You can delete registered sign-in data from card, or assign friendly name (sign-in ID) for the registered services
Register Card to Passkey enabled Service
- Example from iCloud iOS (but it needs 2 security key as a backup)
- Example from Github
Authentication as a Passkey
- Example from Github
- Example from Microsoft 365
Here assumes you already register Card as a security key to your Microsoft365 account
Visit
https://authentrend.com/atkey-card-nfc/ for more information
Or mail to
customer.support@authentrend.com
for advanced contact Thank you!
No more phishing! Start your passwordless login from today.
References
- AuthenTrend FIDO2 Fingerprint Passkey – ATKey.Card NFC
- AuthenTrend FIDO2 Passkey Window Login – ATKey.Login
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>