MONSTER Airmars XKT15 True Wireless Bluetooth Headset Instruction Manual

Airmars XKT1I5
True wireless Bluetooth headset
Instruction manual

Product parameters

• Bluetooth version——V5.3
• Transmission distance——10M
• Driver diameter ——-ΦP13mm
• Driver impedance——-320±15%
• Sensitivity——–108- 3dB
• Frequency response range——–20Hz-20kHz
• Battery capacity (charging case)—–230 mAh 3.7V
• Battery capacity (Headphone)——- 30mAh 3.7V
• Charging time (charging case)——— =1.5 hours
• Music playtime (headphone)——-4hours
• Music playtime with charging case————16 hours

Packing List

Product Schematic Description

( Charge the charging case )
Connect the charging case tothe5V power adapter with Type-C charging cable

Rated input: SV S0mA(Headphone) Rated input: 5V 200m <A (Charging case)
Tips: When the ice blue indicator flashes while closing the cover,please charge in time.

Indicator guide

“Power off”
Pairing| The earphone blue indicator blinks| “Pairing”
Connected| Headphone indicator off| “Connected”
Disconnected| The blue indicator of the headset
is blinking| “Disconnected”
Low Battery| | “Battery Low”
Headphones placed in charging case| RGB lights fade after 12 seconds|
Charging case low power| The red light blinks for 6 seconds|
Charging case charged| RGB light gradient|
Charging case fully charged| RGB light off|

Product operating instruction

1. Power on
   Method 1: Open the cover of the charging box, and turn on the headset automatically after taking it out.
   Method 2: Press the function button on the left/right ear for 3 seconds

2. Power off
   Method 1: Put the headphone/s into the charging case and close the cover.
   Method 2: After disconnected from the BT device for 3 minutes.

3. Pairing
   Method 1: Apen the charging case, the headphones will start pairing automatically.
   Method 2 Open the Bluetooth list of smart devices and search for “Monster
   Aircars XKT15” Make a pair, and when you’ve successfully connected, you’ll hear the prompt “Connected.
   Beyond the distance, within 3 minutes of disconnection, return to the effective distance and automatically connect the device.

Note:

• Fully charge the headphones and power off before an intended not-in-use period.
• Unplug the charging cable after charging.

Operation

Clear Bluetooth device Setting

Power on the earphone. If the earphone is not connected, click the left and right earphone five times, clear the connection information and earphone group information, and  then power off

Precautions

1. After opening the cover of the charging box, take out the earphone to start atom antically, pair and connect; Put the earphones in the charging case and charge the earphones Earphones. Turn off the phone.
2. Charging every 15 days will extend battery life when not in use often. Cleaning off dirt on the charging contacts by cotton swabs with alcohol will maintain a good contact for charging.
3. Keep battery (battery pack) away from inflammables or excessive heat such sunlight. as direct
4. Intermittent is normal during playback for wireless products due to environmental factors, device brand, users’ behavior, ete.

Warnings

1. Do not use headphones at high volume for an extended period of time.
2. Keep the headphones away from dust and water.
3.  Do not disassemble the headphones and accessories, otherwise warranty will be voided.
4. Keep headphones away from any impact or vibration.
5. Do not use any chemical solvents or cleaning agent on the headphones.

This table is compiled according to SJ/T 11364.
O: Indicates that this hazardous substance contained In all of the homogeneous materials for this part ls below the limit requirement in GBT 26572.
X: Indicates that this hazardous substances contained In at least one of the homogeneous materials used for this part Is above the limit requirement in GBYT 26572,

Environment Friendly Use Period (EFUP)
This logo refers to the period (10 years) during which the hazardous substances in electronic and electrical products will not leak or mutate so that the use of these  [substances] will not result in any severe environmental pollution, any bodily injury or damage to any assets.

FCC Statment

This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does Cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two

Conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Warranty Service

Dear user, this warranty card is the proof of your future warranty application, please cooperate with the seller to fill it out and keep it for future use!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>