MONSTER XKT10 Pro True Wireless Bluetooth Headset Instruction Manual
- June 9, 2024
- Monster
Table of Contents
Airmars XKT10 Pro
True wireless bluetooth headset
Instruction manual 
Product parameters
Bluetooth version____V5.3
Transmission distance >10m
Driver diameter____ ɸ 13mm
Driver impedance__ 32 Ω1-15%
Sensitivity____ 109+3dB
Frequency response____ 20Hz-20kHz
Battery capacity (charging case)_ 300mAh 3.7V
Battery capacity (headphone)___ 33mAh 3.7V
Charging time(charging case) ≈ 1.5 hours
Music playtime (headphone) ≈ 5hours
Music playtime with charging case_____ ≈ 24 hours
Packing list
| Headphone*2 | charging case*1 |
|---|---|
| Instructions ManuaL*1 | Type-C charging cable*1 |
| 
Product Schematic Description
(Charge the charging case)
Connect the charging case to the 5V power adapter with Type-C charging cable.
Rated input: 5V=30mA(Headphone)Rated
input: 5V= 300mA(charging case)
Tips: When the ice blue indicator flashes while closing the cover, please
charge in time.
Indicator guide
| Mode | Description | Voice prompt |
|---|---|---|
| Power on | Headphone ice blue indicator flash for | |
| 1 second | „Power on” | |
| Power off | Headphone red indicator flash 3 times | “Power off” |
| Pairing | The earphone flashes red and blue | |
| alternately | “Pairing” | |
| Connected | Headphone indicator off | “Connected” |
| Disconnected | The earphone flashes red and blue | |
| alternately | “Disconnected” | |
| Low Battery | The red light flashes once every 5 | |
| seconds | “Low Battery” | |
| Headphones placed in charging case | The red light of the earphone is always | |
| on, but it goes out when it is full | __ | |
| Charging case tow power | Ice blue indicator flashing | __ |
| Charging case charged | Yellow light flashing | __ |
| Charging case fully charged | The yellow light is permanently on | __ |
Product operating instructions
-
Power on
Method 1:Take out the headphones from charging case, the headphones will turn on automatically.
Method 2: Long press MFB for 3 seconds. -
Power off
Method 1 : Put the headphones into the charging case and close the cover.
Method 2 : After disconnected from the bluetooth device for 3 minutes. -
Pairing Method
1: Take out the headphones from the charging case, the headphones will start pairing automatically.
Method 2: Search and click for “Monster Airmars XKT 10 Pro” on the bluetooth list of the smart device, and when connection is successful, “Connected” will be heard.
- If the distance is exceeded, return to the effective distance within 3 minutes after disconnection, and automatically connect the device.
Note: - If the product is not suitable for a long time, it should be fully charged and ensure that the device is in a shutdown state.
- After charging, please pull out the charging cable to avoid equipment damage caused by long-time charging.
Touch key operation
(Game mode/music mode switch: Device connected)
Key functions
During the call,the advantages of dual-MIC call noise reduction : It can
effectively block the interference of external noise to your call , so that
the other party can clearly hear your speech .and bring you a pleasant call
experience
Restore factory settings
Either headphones is not connected to the bluetooth device when turned on.
click the MFB 5 times to clear the previous pairing information and turn off.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC ID:2A8PV-Q5MT1OP
Precautions
- Headphones will turn on automatically (needless to press any button) pair and connect the device when the charging case is opened. After placing the headphones in the charging case, they will turn off and automatic charging will start when the cover is closed
- Charging every 15 days will extend battery life when not in use often. Cleaning off dirt on the charging contacts by cotton swabs with alcohol will maintain a good contact for charging.
- Keep battery (battery pack) away from inflammables or excessive heat such as direct sunlight.
- Due to the wireless connection mode of this product, in the daily use process, influenced by the environment, mobile phone brand, usage behavior and other factors, it is normal that there may be a brief and slight sound delay in the process of playing music.
Warnings
- Do not use headphones at high volume for an extended period of time.
- Keep the headphones away from dust and water.
- Do not disassemble the headphones and accessories, otherwise warranty will be voided
- Keep headphones away from any impact or vibration.
- Do not use any chemical solvents or cleaning agent on the headphones.
| Name of the Parts | Hazardous substances |
|---|---|
| Pb | Hg |
| Housing | 0 |
| Loudspeakers | 0 |
| PCBA | X |
| Accessories | X |
This table is compiled according to SJ/T 11364.
0: Indicates that this hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in GB/T 26572.
X: Indicates that this hazardous subatance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in
GB/T 26572.
Environment Friendly Use Period (EFUP)
The period of use of this symbol (10 years) is the period during which harmful
substances in electronic and electrical products will not leak or mutate under
normal use conditions, and users of electronic products will not cause serious
pollution to the environment or serious damage to their personal and property
when using this electronic product.
Warranty service
Dear user, this warranty card is the proof of your future warranty application with the seller to fill it out and keep it for future use!
User information
User name| | Email|
---|---|---|---
Contact number| | Postal code|
Mailing address|
Product information
Product name___
Product number____
Product barcode/Serial number/Batch number____
Vendor information
Name|
---|---
Address|
Contact number| | Postal code|
Invoice number| | Sales date|
Remark|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>