SpeedyBee 20230131 Adapter 3 User Manual
- June 10, 2024
- SpeedyBee
Table of Contents
SpeedyBee 20230131 Adapter 3
The SpeedyBee Adapter 3 is a device used to connect a flight controller to a computer. It allows for easy configuration and tuning of the flight controller.
Product Usage Instructions
- Connect the SpeedyBee Adapter 3 to the flight controller using the provided cables.
- Connect the SpeedyBee Adapter 3 to your computer using a USB cable.
- Download and install the SpeedyBee software from the SpeedyBee website.
- Open the SpeedyBee software on your computer.
- Configure and tune your flight controller using the SpeedyBee software.
OVERVIEW
- Bluetooth/WiFi Status Light
- Quick Charge Indicator
- Input Voltage Indicator
- Low Battery Indicator
- input Voltage Value(Volt)
- Charging Indicator
- Charging Port(USB A)
- PH2.0 Port(1-6S input)
- XT60 Port(1-6S Input)
- Type C Connector( to FC )
- Micro USB Connector( to FC )
Power Input(⑧⑨)
- PH2.0 (⑧) and XT60 (⑨) both support 1-6S LiPo battery input.
- Please ensure the input voltage is above 3.8V when using 1S LiPo as the input power.
- For some quads(very few) may consume large currents and can significantly lower the output voltage for powering the flight controller end.
Indicator Definition(①②③④⑥)
Bluetooth/WiFi Status Light
- Blinking RED indicates that Adapter 3 has recognized the flight controller connection but has not connected to the app.
- Solid GREEN indicates that Adapter 3 has recognized the flight controller and also has connected to the app.
- Blinking GREEN indicates that Adapter 3 has connected to the Bluetooth of a mobile device but has not recognized the flight controller.
Quick Charge Indicator
- Solid GREEN indicates that Adapter 3 is now executing quick charge for a device.
Input Voltage Indicator
- Solid RED indicates the input battery level is lower than 40%(Voltage per cell < 3.79V)
- Solid White indicates the input battery level is between 40%-80%(Voltage per cell is between 3.79V-3.98V)
- Solid Green indicates the input battery level is higher than 80%(Voltage per cell > 3.98V)
Low Battery Indicator
- Blinking RED indicates the voltage of each cell of the battery is lower than the set threshold (the default threshold is 3.7V).
Charging Indicator
- Solid RED indicates the Adapter is now charging for a device and the charging power is lower than 6 Walts.
- Solid GREEN indicates the Adapter is now charging for a device and the charging power is higher than 6 Walts
Silicone Data Cable
- When you receive this product, please install the silicone data cable inside the package to the Adapter 3. The two ends of this data cable are a Type C connector and a MicroUSB connector. Please choose the corresponding connector to connect to the flight controller according to the type of the flight controller’s USB interface.
NOTE 1 – It’s safe to power Adapter 3 even if the data cable is connected
to the main body on both ends.
NOTE 2 – Plug the cable back after use for better storage.
Physical Connection
App
Getting the app
- Search ‘SpeedyBee’ on Google Play or App Store. Or download the Android .apk file on our website: https://www.speedybee.com/download.
Parameter settings for flight controller
- When you receive this product, please install the silicone data cable inside the package to the Adapter 3. The two ends of this data cable are a Type C connector and a MicroUSB connector. Please choose the corresponding connector to connect to the flight controller according to the type of the flight controller’s USB interface.
View the charging status
- App > Click the ‘Bluetooth’ button > Click the lightning icon on the device display page.
Black box data analyzing
- Click the left-side sliding menu bar to enter this function.
Firmware Flashing for Flight Controller
- Click the left-side sliding menu bar to enter this function.
8-bit BLHeli_S firmware Flashing
- Click the left-side sliding menu bar to enter this function.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>