Kanlux BLINGO TN24-28W Recessed Mounted LED Panel Instruction Manual
- June 17, 2024
- Kanlux
Table of Contents
2023/03-1
A3-297x420mm/ISO216
www.kanlux.com
BLINGO TN24-28W
BLINGO TN24-28W Recessed Mounted LED Panel
INTENDED USE / APPLICATION
Product for lighting office spaces and for general use.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should
be performed by an appropriately qualified person. Any activities to be done
with disconnected power supply. Exercise particular caution.
Mounting diagram: see pictures. Check for proper mechanical fastening and
connection to electrical power prior to first use. The product can be connected
to a supply network which meets energy quality standards as prescribed by law.
FUNCTIONAL CHARACTERISTICS
Product for indoor use.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the product has cooled down. Clean only with soft and dry cloths. Do not use chemical detergents. Do not cover the product. Ensure free air access. Product may heat up to a higher temperature. ATTENTION! Do not look directly at LED light beam. Product can only be supplied by rated voltage or voltage within the range provided. Product must not be used in unfavourable environment, e.g. dust, moisture,water, vibrations, etc.
EXPLANATIONS OF SYMBOLS USED
P1: Rated voltage, frequency.
P2: Rated power.
P3: Rated luminous flux.
P4: The specified luminous flux refers to the light source (LED module) used.
P5: Rated durability.
P6: Colour Rendering Index.
P7: Colour temperature.
P8: Class II. A product in which protection against electric shock is provided
not only through basic insulation, but also double or reinforced insulation.
P9: Viewing angle.
P10: Protection against solid foreign objects bigger than 12mm provided.
P11: Use only indoors.
P12: The symbol describes the minimal distance of a light fixture (its light
source) from the spots and objects that it’s illuminating.
P13: The product is not compatible with lighting dimmers.
P14: Product meets the requirements of EU directives.
P15: This symbol means that the product can be installed and operated in/on a
surface made of materials which are normally flammable.
P16: The chipped globe, screen or protective shield must be replaced
immediately.
P17: The product not suitable for covering with heat-insulating material.
P18: The product is compliant with all relevant United Kingdom regulations.
P19: Certificate of Conformity confirming the quality of production in
accordance with approved standards on the territory of the Customs Union.
P20: This product is equipped with a light source with energy efficiency class
C.
P21: Class III. A product in which protection against electric shock is
provided by feeding it with very low safe voltage (SELV) with no risk of
creating higher than safe voltage.
P22: The product meets the requirements of technical regulations applicable in
Ukraine.
P23: The control panel or control equipment can be replaced by the end user.
P24: The LED light source can only be replaced by qualified personnel (Kanlux
service only).
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended.
P25: This labelling indicates the requirement to selectively collect waste
electronic and electrical equipment. Products labelled in this way must not be
disposed of in the same way as other waste under the threat of a fine. These
products may be harmful to the natural environment and health, and require a
special form of recycling/neutralising. Products labelled in this way should
be returned to a collection facility for waste electrical and electronic
goods. Information on collection centres is provided by local authorities or
sellers of such goods. Used items can also be returned to the seller when new
product is purchased, in quantity no larger than the purchased item of the
same type. The above rules regard the EU area. In the case of other countries,
regulations in force in a given country must be applied. Contacting the
distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical
shock, physical injury and other material and non-material damage. For more
information about Kanlux products visit
www.kanlux.com Kanlux SA shall not be responsible for
any damage resulting from the failure to follow these instructions. Kanlux SA
reserves the right to make changes in the manual – the current version can be
downloaded at www.kanlux.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>