Brother PT-P300BT Label Printer Safety User Guide
- June 10, 2024
- Brother
Table of Contents
Brother PT-P300BT Label Printer
Introduction
Please read this guide, including all Precautions, before using this Machine. After reading this guide, keep it in a safe place. With your machine, you can create a wide variety of custom, self-adhesive labels, and satin ribbons. This labeler uses Brother “ TZe ” tapes from 3.5 to 12 mm widths. “ TZe ” tape cassettes are available in many colors and sizes. Visit www.brother.com for a complete list of tapes compatible with your machine.
Unpacking the P300BT
Before using your machine, check that the package contains the following components. If any component is missing or damaged, contact your local Brother dealer.
Specifications
Dimensions (W × D × H)| Approximately 4.5″ (W) × 2.4″ (D) × 4.5″ (H)
(115 mm (W) × 61 mm (D) × 115 mm (H)
---|---
Weight| Approximately 0.8 lb (380 g)
(without batteries and Tape Cassette)
Power Supply| Optional AC Adapter (AD-24ES) 6×AAA Alkaline Batteries (LR03)
Rechargeable 6×AAA Ni-MH batteries (HR03)*
POWER UP WITH DURACELL
Interface| Bluetooth Ver 2.1 + EDR Class2
Tape Cassette| Brother TZe Tape Cassette
Compatible widths: 3.5 mm, 6 mm, 9 mm, 12 mm
Safety Precautions
WARNING Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injuries.
Follow these guidelines to avoid the risk of fire, burns, injury, electrical shocks, rupture, overheating, abnormal odours, or smoke.
- Always use the specified voltage and AC Adapter (AD-24ES) for your machine to prevent any damage or failure.
- Do not touch your machine during a thunderstorm.
- Do not use your machine or AC Adapter in places of high humidity such as bathrooms.
- Do not overload the power cord.
- Do not place heavy objects on, or damage your machine, power cord, or plug.
- Do not forcibly bend or pull the power cord. Always hold the AC Adapter when disconnecting from the electrical socket.
- Make sure that the plug is fully inserted into the electrical socket. Do not use an outlet that is loose.
- Do not allow your machine, AC Adapter, power plug, or batteries to get wet, for example, by handling them with wet hands or spilling beverages on them.
- Do not disassemble or modify your machine, AC Adapter, or batteries.
- Do not allow a metal object to touch the plus and minus ends of a battery.
- Do not use sharp objects, such as tweezers or a metallic pen, to change the batteries.
- Do not throw the batteries into the fire or expose to heat.
- Disconnect the AC Adapter, remove batteries immediately, and stop using your machine if you notice an abnormal odour, heat, discoloration, deformation, or anything unusual while using or storing it.
- Do not use a damaged or leaking battery as the fluid may get on your hands.
- Do not use a deformed or leaking battery or one whose label is damaged. There is a possibility of damaging your machine.
- Since the loss of eyesight may result if leaked fluid from batteries gets into your eyes, immediately rinse your eyes with a large amount of clean water, and then seek medical attention.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injuries.
Follow these guidelines to avoid personal injury, liquid leakage, burns, or heat.
- When your machine is not being used, store it out of the reach of children. In addition, do not allow children to put any label printer parts or labels in their mouths. If any object has been swallowed, seek medical attention.
- Do not touch metal parts around the Print Head immediately after printing.
- If leaked fluid from batteries gets on your skin or clothes, immediately rinse them with clean water.
- Remove the batteries and disconnect the AC Adapter if you do not intend to use your machine.
- Do not use any batteries other than those specified. Do not use combinations of old and new batteries or combinations of different types, different charging levels, different manufacturers, or different models. Do not insert a battery with its plus and minus ends reversed.
- Do not drop or hit your machine or AC Adapter.
- Do not put your finger inside your machine when you close the Cassette Cover and the Battery Cover.
- Make sure you use only 6×AAA Alkaline Batteries or rechargeable 6×AAA Ni-MH batteries.
- Before using Ni-MH rechargeable batteries, carefully read the instructions for the batteries and battery charger, and be sure to use them correctly.
- If using Ni-MH rechargeable batteries, charge the batteries with a specialized battery charger before using the batteries.
Warning label
“ Sharp Edge ” or “ Cutter Blade ”
Do not touch the cutter blade or insert your fingers inside the Tape Exit Slot. There is a risk of injury if you touch it.
General Precautions
- Depending on the location, material, and environmental conditions, the label may unpeel or become irremovable, and the color of the label may change or be transferred to other objects. Before applying the label, check the environmental conditions and the material. Do not use your machine in any way or for any purpose not described in this guide. Doing so may result in accidents or damage to your machine.
- Use only Brother TZe Tape Cassettes with your machine. Do not use tapes that do not have the mark.
- Only use a soft, dry cloth to clean your machine; never use alcohol or other organic solvents.
- Use a soft wipe to clean the Print Head; never touch the Print Head with your fingers.
- Do not put any foreign objects into the Tape Exit Slot, the AC Adapter connector, or battery compartment, etc.
- Do not place your machine, AC Adapter, or batteries in direct sunlight or rain, near heaters or other hot appliances, in any location exposed to extremely high or low temperatures (for example, on the dashboard or in the back of your car), high humidity, or in dusty locations.
- Do not try to print if the cassette is empty; it will damage the Print Head.
- Do not pull the tape while printing or feeding; it will damage the tape and your machine.
- Your machine is not equipped with a charging feature for rechargeable batteries.
- The length of the printed label may differ from the displayed label length on your mobile device.
- When printing multiple copies of a label, the label printer will not detect the end of the tape cassette and will continue operating.
- Printed characters may look different than those previewed on your device, as your device’s screen may have a higher resolution than the printer’s.
- Printed small text may not be as clear as it is displayed on your device.
- White and Gold text may not print clearly if you use thin characters.
Different Declaration of Conformity
Declaration of Conformity (Europe/Turkey only)
We, Brother Industries, Ltd. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561
Japan declare that these products and AC adapters are in conformity with the
relevant EU harmonization legislation (Europe/Turkey only) and UK legislation
(Great Britain only). The Declaration of Conformity (DoC) can be downloaded
from the Brother support website. Visit
support.brother.com/manuals.
UK Declaration of Conformity for Radio Equipment Regulation 2017
(Great Britain only) (Applicable to models with radio interfaces) We, Brother
Industries, Ltd. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan declare
that these products are in conformity with the provisions of the Radio
Equipment Regulation 2017. A copy of the Declaration of Conformity can be
downloaded by following the instructions in the Declaration of Conformity
(Europe/Turkey only) section.
EU Declaration of Conformity for RE Directive 2014/53/EU (Europe/Turkey
only)
(Applicable to models with radio interfaces) We, Brother Industries, Ltd.
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan declare that these
products are in conformity with the provisions of the RE Directive 2014/53/EU.
A copy of the Declaration of Conformity can be downloaded by following the
instructions in the Declaration of Conformity (Europe/Turkey only) section.
Information for compliance with Commission Regulation 801/2013
| P300BT | |
|---|---|
| Power consumption* | 0.7W |
All network ports are activated and connected.
How to enable/disable Bluetooth
To activate the Bluetooth function:
Press the Power Button to power on your machine, and Bluetooth will be turned
on. To deactivate the Bluetooth function: Press and hold the Power Button for
0.5 seconds to power off your machine, and Bluetooth will be turned off.
Bluetooth
This printer supports Bluetooth. Frequency band(s): 2400 – 2483.5 MHz. Maximum
radio-frequency power transmitted in the frequency band(s): Less than 20
dBm(e.i.r.p).
Trademarks and Copyrights
Google Play and Android are registered trademarks of Google Inc. Apple, Macintosh, Mac OS, iPhone, iPad, and iPod are trademarks of Apple Inc., registered in the United States and other countries. The names of other software or products used in this document are trademarks or registered trademarks of the respective companies that developed them. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc., and any use of such marks by Brother Industries, Ltd. is under license. Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs. Any trade names and product names of companies appearing on Brother products, related documents, and any other materials are all trademarks or registered trademarks of those respective companies.
FAQ’s
Can you fix a Brother printer?****
You can count on us for prompt, nearby, and guaranteed onsite repairs and maintenance for your Brother laser printer at your residence or place of work. Choose your Brother laser printer model from the list and enter your postcode to see the repair and maintenance costs in your neighborhood.
Are Brother printers memory-equipped?****
Printers have volatile memory (RAM), which, like computers, is erased when you switch the device off. Power is required to store data in volatile memory.
What is the Brother printer’s lifespan?****
A printer typically lasts between three and five years. Some printers can survive longer with careful care and upkeep, but ultimately, you’ll need to upgrade your device.
Why won’t the Brother printer print?****
Examine the cartridge chip after ensuring that the cartridges are properly inserted. Clean it with a cotton swab and some alcohol if it’s unclean, and press it to reset it if it’s been set up wrongly. Now switch off and restart the printer.
Does a Brother printer maintain a record of the documents printed?****
Yes, you can print a printer information report from your printer to verify the printer’s usage log.
How can I use the Brother P Touch label maker to print multiple labels?****
Click the command bar’s (Print) button. After choosing [Auto Cut] and entering the desired number of copies, click [Print]. The printer will automatically set a wider left margin for the first label only in order to feed the tape properly. The margins on the second and succeeding labels will be small.
Why won’t my Brother P-touch label maker turn on?****
Make sure the batteries are not dead or about to run out if your label maker won’t switch on. Six fresh AAA batteries should be used in place of the old ones. Use this battery replacement guide to ensure you replace them correctly. Examine the top battery connections.
What size labels come from a Brother label printer?****
Labels can be printed with a width of 62 mm to 102 mm and can be custom-sized when necessary.
How do I modify the label’s font on my Brother printer?****
Simply press the [Font] key. Select the font, size, width, or style you want to alter by pressing the [Cursor] key, and then press the [OK] key. To change the settings, use the [Cursor] key, and then [OK].
What is the best Brother label printer?****
The Brother P-Touch PT-D610BTVP Business Professional Connected Label Maker is our top pick if you’re especially looking for a desktop labeler. To be clear, we evaluated the Brother PTD600 PC-Connectable Labeler, an older version.
Why can’t I use my Brother label printer?****
The reason why your Brother printer is displayed as “Offline” could be that it is not turned on, has faults like empty toner, is not set as the default printer, has a USB cord or network connection issue, or has any number of other issues.
Are Brother printers memory-equipped?****
Printers have volatile memory (RAM), which, like computers, is erased when you switch the device off. Power is required to store data in volatile memory.
Is ink required for a Brother printer?****
A black toner is provided with every Brother laser printer, and it is highly regarded for producing consistently sharp prints at a reasonable cost per page.
Is ink required for a Brother printer?****
A black toner is provided with every Brother laser printer, and it is highly regarded for producing consistently sharp prints at a reasonable cost per page.
Can you fix a Brother printer?****
You may count on us for quick, nearby, and guaranteed on-site repairs and maintenance at your residence or place of business if your Brother laser printer experiences a problem. Choose your Brother laser printer model from the list and enter your postcode to see the repair and maintenance costs in your neighborhood.
Download this PDF Link:Brother PT-P300BT Label Printer Safety User Guide