FUSION Pro Wireless Gaming Headset User Manual

: June 10, 2024
: FUSION

FUSION Pro Wireless Gaming Headset

PRO WIRELESS GAMING HEADSET

Product Information

The PRO Wireless Gaming Headset is a high-quality gaming headset that offers both wireless and wired connectivity options. It features a 50mm precision- tuned driver, noise-isolating ear cushions, detachable boom mic, adjustable ear cup position, padded headband, and foldable design. The headset is compatible with Xbox Wireless and has a 3.5mm audio input. It also has volume control, game/chat balance dial, microphone mute button, and LED indicators for power and microphone mute status. The headset has a memory foam and cooling gel for added comfort during long gaming sessions.

Headset Specs

50mm precision-tuned driver
Noise-isolating ear cushions
Detachable boom mic
Adjustable ear cup position
Padded headband
Foldable design
Memory foam + cooling gel

Microphone Specs

Detachable boom mic
Microphone mute switch
Microphone jack

Features and Controls

Xbox Wireless mode or 3.5mm wired mode
Wireless: Xbox Wireless Wired: 3.5mm Audio Input Some Windows PCs may require an Xbox Wireless Adaptor (sold separately)
Volume control dial on the left earcup
Game/Chat balance dial on the right earcup
Microphone mute button
Power button
LED indicators for power and microphone mute status

Product Usage Instructions

Wireless Setup

Press and hold the Power Button for 2 seconds to turn on the headset.
Press and release the Bind Button on the Xbox Series X|S or Xbox One and the Xbox logo will start to blink.
Press and hold the Bind Button for 2 seconds on the headset and the Power Button LED will start to blink quickly.
The Power Button LED will change to solid white once pairing is successful.
Insert the microphone and bend to position it in front of your mouth.
Press the Microphone Mute Button to mute the microphone. The Microphone LED will turn red.
Press and hold the Microphone Mute Button for 2 seconds to turn mic monitoring OFF or ON.
Adjust the volume by turning the Volume Control Dial on the left ear cup.
Adjust the game/chat balance by turning the Game/Chat Balance Dial on the right ear cup.
For Xbox: Go to (Settings) > (General) > (Volume & audio output) and under (Headset Format) choose your preferred setting.

Wired Setup

Connect orange end of 3.5mm cable into the headset, and black end into your device. NOTE: The audio cable is one-way and must be connected correctly. The orange end connects to the headset’s orange input, and the black end connects into your device.
Insert the microphone and bend to position it in front of your mouth.
Adjust the volume by turning the Volume Control Dial on the inline controller of the 3.5mm audio cable.
Slide the Microphone Mute Button on the inline controller of the 3.5mm audio cable to mute the microphone.
For Xbox: Go to (Settings) > (General) > (Volume & audio output) and under (Headset Format) choose your preferred setting.
For PC: If your PC uses separate connectors for audio (pink and green) a headset splitter cable is needed (sold separately).
For PS4: Go to (Settings) > (Devices) > (Audio Devices) and set the Output to Headphones option to All Audio.
For PS5: Go to (Settings) > (Sound) > (Audio Output) and set Output Device to Controller Headset. NOTE: In Wired Mode, you control the headset’s functions using the inline controller on the audio cable. The headset’s buttons only work in Wireless Mode.

Charging

Plug the Micro USB end of the cable into the headset and the other end of the cable into a USB power source.

FEATURE

HEADSET SPECS

Frequency Response: 20Hz – 20KHz
Transducer Type: Dynamic/Moving Coil – 50mm
Impedance: 32Ω ±15%
Sensitivity: 100±3dB (@1KHz)
Max Power Output: 30mW

MICROPHONE SPECS

Transducer Type: Electret Condenser
Frequency Response: 100Hz – 10KHz
Sensitivity: -42±3dB (0dB=1V/Pa,1KHz)

CONNECTIVITY

Wireless: Xbox Wireless*
Wired: 3.5mm Audio Input
*Some Windows PCs may require an Xbox Wireless Adaptor (sold eparately)

FEATURES AND CONTROLS

XBOX WIRELESS MODE OR 3.5MM WIRED MODE
50MM PRECISION-TUNED DRIVER
NOISE-ISOLATING EAR CUSHIONS
DETACHABLE BOOM MIC
ADJUSTABLE EAR CUP POSITION
PADDED HEADBAND
FOLDABLE DESIGN

OVERVIEW

WIRELESS SETUP

CONFIGURAZIONE WIRELESS

CONFIGURAZIONE CABLATA

VOLUME AND MUTE

VOLUME E MUTE

WIRELESS MODE

WIRED MODE

GAME/CHAT BALANCE

SPIEL / CHAT-BALANCE

CHARGING

AUFLADEN

SETUP

WIRELESS SETUP

Press and hold the Power Button for 2 seconds to turn on the headset.
Press and release the Bind Button on the Xbox Series X|S or Xbox One and the Xbox logo will start to blink.
Press and hold the Bind Button for 2 seconds on the headset and the Power Button LED will start to blink quickly.
The Power Button LED will change to solid white once pairing is successful.
Insert the microphone and bend to position it in front of your mouth.
Press the Microphone Mute Button to mute the microphone. The Microphone LED will turn red.
Press and hold the Microphone Mute Button for 2 seconds to turn mic monitoring OFF or ON.
Adjust the volume by turning the Volume Control Dial on the left ear cup.
Adjust the game/chat balance by turning the Game/Chat Balance Dial on the right ear cup.
FOR XBOX: Go to (Settings) > (General) > (Volume & audio output) and under (Headset Format) choose your preferred setting.

NOTE: Windows 10 requires the Xbox Wireless Adapter (either built into the PC or sold separately).

WIRED SETUP

Connect orange end of 3.5mm cable into the headset, and black end into your device.
NOTE: The audio cable is one-way and must be connected correctly. The orange end connects to the headset’s orange input, and the black end connects into your device.
Insert the microphone and bend to position it in front of your mouth.
Adjust the volume by turning the Volume Control Dial on the inline controller of the 3.5mm audio cable.
Slide the Microphone Mute Button on the inline controller of the 3.5mm audio cable to mute the microphone.
FOR XBOX: Go to (Settings) > (General) > (Volume & audio output) and under (Headset Format) choose your preferred setting.
FOR PC: If your PC uses separate connectors for audio (pink and green) a headset splitter cable is needed (sold separately).
FOR NINTENDO SWITCH: Game chat is supported either in-game or through the Nintendo Switch Online App and varies by game. Adjust volume on the Nintendo Switch console using the physical + and – volume buttons, or via the Quick Settings screen.
FOR PS4™: Go to (Settings) > (Devices) > (Audio Devices) and set the “Output to Headphones” option to “All Audio”.
FOR PS5™: Go to (Settings) > (Sound) > (Audio Output) and set “Output Device” to “Controller Headset”.
NOTE: In Wired Mode, you control the headset’s functions using the inline controller on the audio cable. The headset’s buttons only work in Wireless Mode.

CHARGING

Plug the Micro USB end of the cable into the headset and the other end of the cable into a USB power source.
While charging the Power Button LED will pulse orange, and then turn off when fully charged.
When the battery level is under 10%, the Power Button LED will start blinking orange.

NOTE: Remember to charge your headset at least once every 60 – 90 days when either the low battery indicator is active, or the battery is depleted so that the battery retains its ability to charge. Remember to fully charge the headset at least once a year if the headset will not be used for an extended period of time so that the battery retains its ability to charge. Battery capacity will gradually reduce over time with repeated charging.

TROUBLESHOOTING

For latest FAQs, visit PowerA.com/Support

PROBLEM: Why do I hear static or no sound?
- SOLUTION: When in Wireless Mode, ensure the FUSION Pro Wireless Headset is paired with the console, that the Volume Control Dial is not set to minimum, and that the Game/Chat Balance Dial is not maxed out to either Game or Chat audio.
- SOLUTION: For Wired Mode, check that the 3.5mm audio cable is securely attached to both the source device and the FUSION Pro Wireless Headset.
  SOLUTION: Check console or PC menu settings to be sure sound is being output to the headset.
  SOLUTION: On Nintendo Switch, if volume seems low, try turning the “Lower Max Headphone Volume” in system settings to OFF.
PROBLEM: Why can’t my friends hear me?
- SOLUTION: Make sure that the microphone is securely attached to the headset, and that the Microphone LED is not on.
- SOLUTION: Check console or PC menu settings to be sure the headset microphone is selected for input.
- SOLUTION: For Wired Mode, make sure the orange cable end is connected to the headset and not the device.

HEARING DAMAGE RISK
High sound pressure! Do not listen at high volumes for long periods.

BATTERY WARNING

Don’t attempt to replace the rechargeable battery yourself- you may damage the battery, which could cause overheating, fire, and injury.
The Lithium-ion battery in your device should be serviced or recycled by PowerA or an authorized provider and must be recycled or disposed of separately from household waste.
Dispose of batteries according to your local environment laws and guidelines.
Don’t use or leave the product containing rechargeable batteries exposed to very high or very low temperature (e.g. at strong direct sunlight or in a vehicle in extremely hot or extremely cold weather), or in an environment with extremely low air pressure can result in an explosion, fire, or the leakage of flammable liquid or gas.
Don’t use this product in a location where static electricity is rich, otherwise, the internal safety devices may be damaged, causing a harmful situation.
In case the electrolyte gets into the eyes due to the leakage of battery, do not rub eyes! Rinse eyes with clean running water and seek medical attention immediately. Otherwise, it may injure eyes or cause a loss of sight.
If the battery gives off an odor, generates heat, or in any way appears abnormal during use, recharging or storage, immediately remove it from battery charger and place it in a safe spill-proof storage, made of glass or metal.
Be aware discarded batteries may cause fire. Do not heat this product or throw it into fire, or mechanically crush or cut the battery.

FCC INTERFERENCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-003(B)/NMB-003(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

CUSTOMER SERVICE

For support with your authentic PowerA accessories, please visit PowerA.com/Support

MANUFACTURED BY
ACCO Brands USA LLC, 4 Corporate Way, Lake Zurich, IL 60047
ACCOBRANDS.COM | POWERA.COM | MADE IN CHINA

WARRANTY

2-Year Limited Warranty: Visit PowerA.com/Support for details.

AUSTRALIAN WARRANTY STATEMENT

This product comes with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If purchased within Australia or New Zealand, this product comes with a one-year warranty from date of purchase. Defects in the product must have appeared within one year from date of purchase, in order to claim the warranty. All warranty claims must be facilitated back through the retailer of purchase in accordance with the retailer’s return policies and procedures. Any expenses incurred, as a result of returning the product to the retailer of purchase are the full responsibility of the consumer.

AU WHOLESALE DISTRIBUTOR
Level 2, 2 Darling Street South Yarra, Australia VIC 3141 bluemouth.com.au | Email: support@bluemouth.com.au | +61 (3) 9867 2666

ADDITIONAL LEGAL
© 2022 ACCO Brands USA LLC. PowerA, the PowerA Logo, and the FUSION logo are trademarks of ACCO Brands Corporation. Microsoft, Xbox, Xbox “Sphere” Design, Xbox Series X|S, Xbox One, and Windows are trademarks of the Microsoft group of companies. All other trademarks are the property of their respective owners. All rights reserved.

REGIONAL COMPLIANCE SYMBOLS

More information available via web-search of each symbol name.

The WEEE (Waste of electrical and electronic equipment) symbol requires battery disposal outside of other household waste per local regulations. Contact your city office, waste disposal service, or retailer for guidance.

The CE (Conformité Européene aka European Conformity) mark is a declaration from the manufacturer that the product meets applicable European Directives and Regulations for health, safety, and environmental protection.

The UKCA (UK Conformity Assessment) mark is a declaration from the manufacturer that the product meets applicable UK Regulations for health, safety, and environmental protection.

The Regulatory Compliance Mark is a visible indication of a product’s compliance with all applicable ACMA (Australian Communications
and Media Authority) regulatory arrangements, including all technical and record-keeping requirements regarding the electrical safety and/or electromagnetic compatibility (EMC).

DECLARATION OF CONFORMITY

TRADE NAME: PowerA | MODEL NO.: 1502079-01

US COMPANY NAME: ACCO Brands USA, LLC
ADDRESS: 4 Corporate Way, Lake Zurich, Illinois 60047 United States
INTERNET CONTACT INFORMATION: ACCOBRANDS.com | POWERA.com
Hereby, ACCO Brands USA LLC at 4 Corporate Way, Lake Zurich, IL 60047 USA, declares that this wireless headset is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: PowerA.com/compliance

5G WIFI HEADSET CAUTION
Working temperature: -20~50°C | Working Voltage: 3.3V-4.7V
The device for operation in the band 5150-5350 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite system.

RF EXPOSURE COMPLIANCE
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC SAR COMPLIANCE
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment could be installed and operated with minimum distance 0cm between the radiator and your body. End user must follow the specific operating instructions for satisfying
RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

WIRELESS SPECIFICATIONS FOR EU COMPLIANCE

4G WI-FI FREQUENCY RANGE: 2412MHz- 2472MHz;
OUTPUT POWER: 4.83dBm
5G WI-FI FREQUENCY RANGE: 5180-5240MHz; 5260-5320MHz; 5500-5700MHz; 5745-5825MHz;
OUTPUT POWER: 9.12dBm
INPUT POWER: DC3.7V, 900mAh

POWERA.COM/SUPPORT
2-YEAR LIMITED WARRANTY
VISIT POWERA.COM FOR DETAILS.
Garantie limitée de 2 ans – Rendez-vous sur PowerA.com pour de plus amples informations.
ACCO Brands USA LLC, 4 Corporate Way, Lake Zurich, IL 60047

CONTENTS
FUSION Pro Wireless Headset | Detachable Boom Mic | User Manual
42˝ (1.07 m) 3.5mm Audio Cable | 24” (60.96 cm) Micro USB Charge Cable