MIKSTER NTD-01 PHARM Radio Temperature Sensor Owner’s Manual
- June 10, 2024
- MIKSTER
Table of Contents
MIKSTER NTD-01 PHARM Radio Temperature Sensor
Product Information
The NTD-01 PHARM Radio Temperature Sensor is a device that measures
temperature and humidity. It has an LCD display with four digits that shows
the temperature readings. It can measure temperatures ranging from -40°C to
+70°C, with an accuracy of ±0.3°C. The humidity range is 0% to 99% RH without
condensation. It
is powered by a 3.6v AA 2.6 AA replaceable lithium battery which is
permanently mounted.
The device has an internal digital sensor for temperature measurement, and it
has an option to connect a dedicated external temperature or temperature and
humidity probe (sold separately). The device has one internal channel for
temperature measurement,and it can be expanded by connecting up to two
external probes.
The device has external dimensions of 71 x 71 x 27mm (W x H x D) without the
antenna and weighs 80g (net). It has an IP20 degree of protection, making it
suitable for indoor use.
Technical Data
-
Temperature Measuring Range: -40°C to +70°C
-
Temperature Measurement Error: ±0.3°C
-
Temperature Measuring Resolution: 4,608 samples/channel
-
Humidity Range: 0% RH to 99% RH (no condensation)
-
Power: 3.6v AA 2.6 AA replaceable lithium battery
-
Antenna: Permanently mounted external one, height 90mm
-
Registration: LCD 4 digits dedicated
-
Measuring Element: Internal digital sensor
-
Measurement Channels: One internal (temperature). Expandable by
a further 2 using an external probe -
Operating Conditions: Indoor use only
Installation Instructions
- Insert the 3.6v AA 2.6 AA replaceable lithium battery into the device.
- If using an external probe, connect it to the device following the instructions provided with the probe.
- Hang the device on a wall or place it on a flat surface.
- The device will automatically start measuring temperature and humidity.
Usage Instructions
- To view the current temperature reading, look at the LCD display on the device. The display will show a four-digit number representing the temperature in Celsius.
- If using an external probe, make sure it is properly connected to the device and functioning correctly.
- If you want to expand the number of channels for temperature measurement, you can connect up to two external probes.
- Avoid exposing the device to temperatures and humidity outside of its operating range.
- Replace the battery when it runs out of power.
You can find more information about this product at www.mikster.com.pl. If you have any questions or concerns about this product, please contact MIKSTER
Sp. z o.o. at [email protected] or call 32 763 77 77.
DESCRIPTION
The Netino NTD-01 Pharm temperature sensor is one of the components of the
Netino-PHARM recording system.
It is used to measure the temperature of pharmaceutical products in medical
rooms and refrigerators. It records the temperature and visualises the
measurement on the display. It was designed with the special requirements of
the pharmaceutical industry in mind. Its use to recommended in places where
installation is difficult or inadvisable, and there are no difficult
environmental conditions.
Dimensions
Connecting an additional probe
Technical data
Technical data
Power| 3.6 v AA 2.6 AA replaceable lithium
battery
Antenna| permanently mounted external one,
height 90 mm
Registration:| 4,608 samples/channel
Display:| LCD 4 digits dedicated
Temperature measuring range:| -30 ℃ ÷ 70 ℃
Temperature measurement error:| ≤±0.3 ℃ in the range of 0 ℃ to 25
℃
≤±0.5 ℃ in other ranges
Temperature measuring resolution:| 0,1℃
Communication:| 868.4 MHz radio
Measuring element:| internal digital sensor
option to connect a dedicated, external temperature or temperature and
humidity probe (sold separately)
Measurement channels:| one internal (temperature).Expandable by a further 2
using an external probe
Operating conditions:| temperature: –30°C to 70 °C humidity: 0% RH to 99% RH
(no condensation)
Installation data
External dimensions| 71 x 71 x 27 mm (w x h x d) without antenna
Weight| 80 g (net)
Fixing| You can hang it or put in on the ground
Degree of protection| IP 20
www.mikster.com.pl MIKSTER Sp. z o.o. 41-250 Czeladź, ul. Wojkowicka 21, tel. 32 763 77 77 fax: 32 763 75 94 email: [email protected]