SmartDream POPPOP Smart Button User Manual
- June 5, 2024
- SmartDream
Table of Contents
SmartDream POPPOP Smart Button
**User Manual**User manual
Manufacturer : SMARTDREAM
Model name : POPPOP(PP01T)
Contact : isohn@seoultech.ac.kr
Product Specification
- Sample size : 40mm x 40mm x 17mm
- Appearance Material : ABS
- Operating voltage : 3V (Coin Battery)
- Current consumption : about 4mA (active state) / about 1uA (sleep state)
- Wireless transmission method : Bluetooth 4.0 Low Energy protocol (only Beacon, connection not used)
- Wireless transmission band : 2.4GHz
- Wireless transmission power : 0dBm
- Wireless modulation method : GFSK
- Wireless coverage : within 60m
- Wireless modem chip : TI CC2541
User manual
- How the product works
1. Normally, the product is in “SLEEP” status : no RF signal & no LED light on the bottom
2. When pressed on top, the product enters “ACTIVE” status for 10 seconds : beacon signal transmission & LED light on
3. After 10 seconds, the product goes back to “SLEEP” status
FCC Warning Statement
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this device that are
not expressly approved by the manufacturer may void the user’s authority to
operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF Radiation exposure limits set forth for an
uncontrolled environment.
This device and its antenna must not be co-located or operating in conjunction
with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>