avatar BESL18 Smart Curtain Lights App User Manual
- June 10, 2024
- AVATAR
Table of Contents
avatar BESL18 Smart Curtain Lights App
SPECIFICATIONS
| Color | RGBW |
|---|---|
| Power supply | Adapter |
| Input voltage | 100-240V |
| Control method | Remote/ APP Control / Control box |
| Working temperature | -2o·c-5o·c |
Dimmable,16Million Color.Music Sync, App Control, Local control. Please note that all colorful string lights cannot be DIY cut !
1. Quickly double-click the button to control the on/off of the light string.
2. Long press the button for three seconds, the color light, music, and scene
modes will cycle in sequence.
3.ln the color light mode, click the button to switch to the next color, and
cycle in sequence; in the music mode,
click the button to switch to the next music rhythm mode, cycle in sequence; in the scene mode, click the button to switch to the next Scenes, loop in turn.
4. Press the button five times in quick succession to turn on/off the infrared function, flashing red light is on, flashing green light is off.
IR Remote Controller 40 KEY
l.Poun button.
2. Open and close buttons.
3. All modes in cycle button
4. Color wheel, press to switch colors in between
5. Cool white and warm white buttons.
6. Flip horizonlally.
7. shif pward/down/left/right, flash, solid
8.15 theme scene buttons.
9. Theme single scene mode loop, switching one every 30 seconds.
10. Single scene mode and music mode switch from previous to next.
11. Scene mode speed adjustment l+/-1
12. Music mode sensitivitv adiustment l+/-1
13. LED brightness adjustment l+/-1
14.4 music modes.
15. Timing function: l hour, 2 hours, 4 hours, 8 hours.
Please pull out the plastic tab from the bottom of the IR remote to ensure that the battery is powered properly
Make sure the IR remote aims at the IR receiver within the sensing distance. The angle of the IR receiver is 120 and the sensing distance is 5 meters. Please remotely control within the sensing range.
Connect mobile phone
- Plug in the power, then turn on the string light switch.
- Turn on the mobile phone Bluetooth.
- Open the Hello Fairy APP on thee mobile phone and search for the device “Hello Fairy -xxx.
- After the device name is displayed on the interface, you can click Hello Fairy -xxx to enter the main interface and start the operation.
INSTALLATION DIAGRAM
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and [2) This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Warning
- Please pay attention to prevent statical electricity during the installation and use of the product Do not use sharp Objects to touch the product, and avoid contact to the strong chemicals such as strong acid and alkal.
- During installation , the bent part should be avoided just in the position of the LED components, so as not to damage the product and affect its service life.
Warranty description
This product has one-year warranty from the day after signing. Please contact us if you have any questions orissues.
Contact Us
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>