ViewSonic LS710HD Series DLP Projector User Guide
- June 10, 2024
- Viewsonic
Table of Contents
ViewSonic LS710HD Series DLP Projector
Product Information
The LS710HD Series is a DLP projector manufactured by ViewSonic. The projector has two HDMI inputs, one with HDCP 1.4 and the other with HDCP 2.2. It also has a USB A port for service and an RS232 port for control purposes. The device operates on a voltage range of 100-240 Vac at 50/60 Hz.
The projector is compliant with part 15 of the FCC rules, as well as the EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, Ecodesign Directive 2009/125/EC, and RoHS2 Directive. For detailed compliance information, please refer to the Declaration of Conformity available at https://www.viewsonicglobal.com/public/products_download/safety_compliance/projector/VS19338_CE_DOC.pdf.
Product Usage Instructions
- Connect the power cord to the projector and plug it into an electrical outlet.
- Connect the source device to the projector using an HDMI cable.
- Note that there are two HDMI inputs, with one supporting HDCP 1.4 and the other supporting HDCP 2.2.
- If needed, connect a USB A device to the service port for service purposes.
- If needed, connect a control device to the RS232 port for control purposes.
- Turn on the projector using the power button.
- Adjust the focus and zoom as needed using the focus and zoom rings on the lens.
- Adjust the image size and position as needed using the keystone correction and other image adjustment settings available in the projector menu.
- Play content on the source device and adjust the brightness and contrast as needed using the projector settings.
- When finished, turn off the projector using the power button and unplug the power cord from the electrical outlet.
WHAT’S IN THE BOX
POWER ON/OFF
CONNECTION
INSTALLATION
Dimension
Technical Specifications
It is recommended that if you intend to permanently install the projector, please physically test the projection size and distance using the actual projector in situ before you permanently install it.
FCC
Compliance Statement
- This device complies with part 15 of FCC Rules.
Operation is subject to the following two conditions
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
- Industry Canada ICES-003 Compliance: CAN ICES-003(B) / NMB-003(B)
CE Conformity for European Countries
- CE The device complies with the EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and Ecodesign Directive 2009/125/EC. The full Declaration of Conformity can be found at the following website:
- htps://www.viewsonicglobal.com/public/products_download/safety_compliancelprojector/VS19338_CE_DOC.pdf
- Declaration of RoHS2 Compliance
- This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the
- European Technical Adaptation Committee (TAC).
- ViewSonic Projector
- Download Link
- http://vsweb.us/q/dn.php
Documents / Resources
|
ViewSonic LS710HD Series DLP
Projector
[pdf] User Guide
LS710HD Series DLP Projector, LS710HD Series, DLP Projector, Projector
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>