TESLA B250 Smart Camera Baby User Manual
- October 29, 2023
- Tesla
Table of Contents
TESLA B250 Smart Camera Baby
Tesla Smart Camera Baby B250
The Tesla Smart Camera Baby B250 is a high-quality smart camera designed specifically for your baby’s room. It features a status light, microphone, SD card slot, reset button, speaker, call button, micro USB port, power input and captures sound for your video. The device supports local SD card storage (Max.128G) and provides an easy-to-use interface via the Tesla Smart App for both iOS and Android OS.
Product What’s in the Box?
- Tesla Smart Camera Baby B250
- Mounting bracket
- Micro USB cable
- User manual
Installation
To install the Tesla Smart Camera Baby B250, follow these simple steps:
- Use the included mounting bracket to fix the camera to a clean surface.
- Alternatively, place the camera on a flat surface.
Connecting to WiFi
To connect your Tesla Smart Camera Baby B250 to WiFi, follow these steps:
- Download the Tesla Smart App from the App Store or Android Market.
- Set up your router to support 2.4GHz WiFi (doesn’t support the 5GHz).
- Open the Tesla Smart App and register your account.
- In the app, create a family and add the camera by scanning the QR code on your phone.
- When connecting, ensure that your router, mobile, and camera are as close as possible.
Usage
Once your Tesla Smart Camera Baby B250 is connected to WiFi, you
can use the Tesla Smart App to access the camera’s features:
- View live video feed from the camera.
- Customize settings such as camera name and common functions.
FAQ
If you encounter any issues with your Tesla Smart Camera Baby
B250, refer to the following frequently asked questions:
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after resetting?
A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the
relevant reminder function has been opened;Message notification and authority
confirmation in the mobile phone system have been opened.
WHAT‘S IN THE BOX
Please consult this checklist for all parts.
- Smart Camera 360 Baby
- Power adapter
- USB cable
- Bracket
- Screws
- Pin
- User manual
| Power | DC 5V ±10% |
|---|---|
| Status light | Red light solids on: the camera or network is abnormal |
Blinking red light: awaiting WiFi connection (faster blinking) Blue light solids on: camera running correctly
Blinking blue light: currently connecting (faster blinking)
Microphone| Captures sound for your video
SD card slot| Supports local SD Card storage (Max.128G)
Reset| Press and hold for 5 seconds to reset the camera (if you have
modified settings, they will return to factory defaults)
Call| Receive the answer after pressing the button
INSTALL
- Use the included mounting bracket to fix the camera to a clean surface.
- Or, put the camera on a flat surface.
CONNECT
Download
Tesla Smart is available for both iOS and
Android OS. Search the name ‚Tesla Smart‘ in App Store or Android Market, or
scan the QR-Code to download the App.
SET UP ROUTER
The router supports the 2.4GHz WiFi (doesn‘t support the 5GHz). Before
connecting to the WiFi network, please set the parameters of the router, and
record the SSID and password of your WiFi. Keep the network available.
REGISTRATION PROCESS
- Step 1 Open the Tesla Smart App, click „Register“, read the „Privacy Policy“ and click „Agree“ .
- Step 2 Input a legal and valid Mobile number or Email address and click „Continue“. Input Verification Code, then log in the app.
QR CODE CONFIGURATION
- Open the Tesla Smart App, click „Create family“, and you can custo-mize the Family name and related settings.
- Continue to click „Security & Sensor“ >> „Smart Camera“, and then choose“ Add Device“ or „+“, ready to add camera.
- In „Add Device“ this interface,continue to click „next step“, and then you should input your WiFi‘s passwords. Note:
- Camera only supports 2.4GHz WiFi network.
- The number of bits in the ssid and passwords of the router should not exceed 24 digits.
- In this interface, you should scan the QR code in your phone with the camera, when the camera comes out „dong dong dong“. And you can complete the configuration about 30s.
- When connecting, you should make sure your router, mobile,and camera are as close as possible. When camera added successffully, click „ „ you could also DIY the camera‘s name.
SETTINGS
In the „Smart Camera“ interface,click „ „,you can set the camera common
functions.
FUNCTIONS
Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you with 360
degrees of vision.
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send you push
notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage or Cloud
storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology.
One-Touch Call
Hear your baby‘s call anytime, anywhere.
TECHNICAL SPECIFICATION
| Power | DC 5V ±10% |
|---|---|
| Status light | Red light solids on: the camera or network is abnormal |
Blinking red light: awaiting WiFi connection (faster blinking) Blue light solids on: camera running correctly
Blinking blue light: currently connecting (faster blinking)
Microphone| Captures sound for your video
SD card slot| Supports local SD Card storage (Max.128G)
Reset| Press and hold for 5 seconds to reset the camera (if you have
modified settings, they will return to factory defaults)
Call| Receive the answer after pressing the button
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for a separate collection. The product
must be disposed of in accordance with the regulations for disposal of
electrical and electronic equipment (Directive 2012/19/EU on waste electrical
and electronic equipment). Disposal together with regular municipal waste is
prohibited. Dispose of all electrical and electronic products in accordance
with all local and European regulations at the designated collection points
which hold the appropriate authorization and certification in line with the
local and legislative regulations. Correct disposal and recycling help to
minimize impacts on the environment and human health. Further information
regarding disposal can be obtained from the vendor, authorized service centre
or local authorities.
EU DECLARATION OF CONFORMITY
Hereby, Tesla Global Limited declares that the radio equipment type TSL-
CAM-B250 is in compliance with EU directives. The full text of the EU
declaration of conformity is available at the following internet address:
tsl.sh/doc
- Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
- Frequency band: 2.412 – 2.472 GHz
- Max. radio-frequency power (EIRP): < 20 dBm
Manufacturer
Tesla Global Limited Far East Consortium Building, 121 Des Voeux Road Central
Hong Kong
www.teslasmart.com