WILTEC 60280 Bicycle Repair Stand 360 Dergree User Manual
- June 4, 2024
- wiltec
Table of Contents
WINTEC 60280 Bicycle Repair Stand 360 Degree
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate
insignificantly due to continuous further developments.
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk
of injury, we ask you to always take some basic safety precautions when using
this product. Please read this operating manual carefully and make sure that
you understand it.
Keep these operation instructions in a safe place.
Technical specifications
| Capacity | 1 bicycle |
|---|---|
| Clamp rotation (°) | 360 |
| Material | Powder-coated steel |
| Max. capacity (㎏) | 30 |
Quick-opening clamp
Safety instructions
- Follow the instructions below to ensure a correct mounting, adjusting, and use of the bicycle stand.
- The bicycle stand must not be modified.
- To avoid tilting, only place the bicycle stand onto a solid and flat surface.
- Never mount a bicycle while this is attached to the stand.
- To avoid damages of the bicycle, do not compress the frame.
Assembly
- Install the base of the bicycle stand by pressing the hinge assembly (F) of the top (A) down to the stop. Clamp the quick clamp (F). The feet can be spread at different degrees. However, the stabil-ity will be reduced with the clamping bar further extended and the feet not entirely spread.
- Open the paws (G) of the feet as soon as you have placed the repair stand onto a suitable (solid and flat) surface.
- Mount the telescopic bar (B) to the top (A) be-fore plugging the stand (C) onto the telescopic bar.
- Fix the tool rack (D) to the top (A) to a comfort-able height.
- To further rise the stability of the bicycle stand, the base can be fixed to the ground.
- Using the wheel stabiliser (E) to connect the front wheel to the frame of the repair stand and to secure it.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH.
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved. WilTec Wildanger Technik GmbH
cannot be held liable for any possible mistakes in this operating man-ual, nor
in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to
ensure that this operating manual is complete, accurate, and up-to-date,
errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward
to hearing from you. Send us an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler – Germany
Do you wish to collect your goods? Our address for collection is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler – Germany
In order to shorten the waiting time and to allow for an easy on-site
processing, we kindly ask you to contact us briefly beforehand or to place
your order via the webshop.
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
To return your goods for exchange, repair, or other purposes, please use the
following address. Atten-tion! To allow for a trouble-free complaint or
return, it is important to contact our customer service team before returning
your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler – Germany
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
https://www.XPOtool.com The Tool Experts
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>