CyberPower B625 6 Outlet Surge Protectors User Manual

: June 10, 2024
: CyberPower

Table of Contents

CyberPower B625 6 Outlet Surge Protectors
Product Information
Product Usage Instructions
OVERVIEW
FEATURES
SPECIFICATIONS
TROUBLESHOOTING
FOR MORE INFORMATION
TECHNICAL SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CyberPower B625 6 Outlet Surge Protectors

CyberPower-B625-6-Outlet-Surge-Protectors-PRODUCT

Product Information

The B625 Surge Protector is a 6-outlet power strip designed to protect your electronic devices from power surges and spikes. It features a 25 ft power cord with six standard grounded outlets and a resettable 15 Amp circuit breaker, which also serves as an ON/OFF switch. When the surge protector detects an overload, it will automatically switch off and cut power to all outlets. The surge protector has a clamping voltage of 600V, maximum peak current of 45000 A, and response time of less than 1 nanosecond. It can protect AC power lines including L-N, L-G, and N-G. The product is UL listed and comes with a one-year warranty.

Product Usage Instructions

Plug the surge protector into a grounded AC outlet.
Connect your electronic devices to the six standard grounded outlets.
Ensure that the total power consumption of your devices does not exceed 1875 watts or 15 amps.
To turn on the surge protector, switch the ON/OFF control switch to the ON position. The Protected LED indicator should light up.
In case of an overload, the circuit breaker will automatically switch off, cutting power to all outlets. To resume operation, remove the device that is overloading the circuit, switch the ON/OFF control switch to the OFF position, and then back to the ON position.
The product has keyhole mounting slots for easy installation on walls or other surfaces.

CAUTION: This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS), which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.

If you encounter any issues with the product or need technical support, please contact Cyber Power Systems customer service.

OVERVIEW

FEATURES

ON/OFF Reset Control Switch and Circuit Breaker Controls power to all outlets. The switch is also a 15 A breaker. When an overload occurs, it will automatically switch off. To resume operation, ensure the overload condition is removed and reset the surge protector by switching the unit ON.
Protected LED Indicator
Standard Grounded Outlets (6)
25 ft Power Cord
Keyhole Mounting Slots

SPECIFICATIONS

Model Number: B625
Outlets: Standard Grounded Outlets (6)
Power Cord Length: 25ft
Surge Protection: 1500 Joules
Electrical Rating: 125 V/15 A/60 H/1875 W
UL Clamping Voltage: 600V (L-N, L-G, N-G)
Maximum Peak Current: 45000 A
AC Lines Protected: L-N: 15000 A, L-G: 15000 A,
- N-G: 15000 A
Response Time: Less than 1 nanosecond
Circuit Breaker: Resettable 15 Amp

_ WARNING: _This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS), which is known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK:

Use only in dry locations and only indoors.
DO NOT plug into another relocatable power tap.
DO NOT “daisy chain” surge protectors.
DO NOT use with any aquarium equipment.
DO NOT use if properly grounded outlets are not available.
DO NOT install this device if there is less than 10 meters (30 feet) of wire between the electrical outlet and electrical service panel.
DO NOT use for medical or life support equipment. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but it will maintain unprotected power to the load.

TROUBLESHOOTING

If the ON/OFF is switched OFF, the 15 Amp circuit breaker may have tripped. Examine your connected equipment and remove the device that is overloading the circuit. Then, turn the ON/OFF switch back to RESET.