BOULT AUDIO X60 AirBass TWS Bluetooth Earbuds User Manual

BOULT AUDIO X60 AirBass TWS Bluetooth Earbuds

Product Information

• Product Name: TWS Bluetooth Headset
• Model: Boult Audio AirBass
• Bluetooth Version: V5.3
• Speaker: 10mm
• Bluetooth Range: ~10m/33ft (without any obstacles)
• Neckband Charging Time: 45 mins
• Frequency Range: 20Hz-20KHz
• Technology: HFP/HSP/A2DP/AVRCP
• Input: DC5V== 1A
• Battery Life: ~30 hours
• Water Resistant Rating: IPX5
• Special Features: Active Noise Cancellation (ANC)

Product What’s in the Box

• Charging Case
• Earbuds
• Type C Charging Cable
• User Manual
• Extra pair of eartips

Product Usage Instructions

Touch Control

The Touch Area (MFT Touch Panel) is located in the upper part of earbuds handle.

• Play/Pause: Tap the MFT once.
• Next Track: Double tap the right MFT.
• Previous Track: Double tap the left MFT.
• Volume+: Triple tap the right MFT.
• Volume-: Triple tap the left MFT.
• ANC Mode: Long press the right MFT to switch ANC modes.
• Voice Assistant: Long press the MFT for 2s.
• Answer the call: Tap the MFT once.
• End Call/Reject: Double tap the MFT.

Power On/Off

• Power On: Auto: Open the charging case and take out the earbuds to power on. Manually: Press and hold the MFT for 3s.
• Power Off: Auto: Place both earbuds in the charging case, close the lid. Manually: Press and hold the MFT for 5s.

Voice Prompt

• Power On: You will hear `power on’ when the headset powers on.
• Power Off: You will hear `power off’ when the headset powers off.
• Connected: You will hear `connected’ when the headset is paired.
• Low Battery: You will hear `low battery’ when the headset is in low power status.
• ANC On / ANC Off / Transparent Mode: You will hear `ANC On / ANC off / Transparent mode when the headset is toggling between different modes.

product Maintenance Instructions

The warranty is valid/invalid only based on the below criteria:

• The product should be purchased through legal and formal channels to be applicable for warranty.
• Damaging the product intentionally/unintentionally, or due to natural disasters, etc. is not covered in the warranty.

OVERVIEW

What’s in the box

• Charging Case
• Earbuds
• Type C Charging Cable
• User Manual
• Extra pair of eartips

Product specification

• Product Name – TWS Bluetooth Headset
• Model – Boult Audio AirBass
• Bluetooth Version V5.3
• Speaker – 10mm
• Bluetooth Range – ~10m/33ft (without any obstacles)
• Neckband Charging Time – 45 mins
• Frequency Range – 20Hz-20KHz
• Technology – HFP/HSP/A2DP/AVRCP
• Input DC5V== 1A

How to use your X60

Touch Control
The Touch Area (MFT Touch Panel) is located in the upper part of earbuds handle.

Wearing Earbuds
The earbud marked with L is worn on the left ear and the earbud marked with R is worn on the right ear.

Power On/Off

• Power on: Auto : Open the charging case and take out the earbuds to power on.
• Manually : Press and hold the MFT for 3s.
• Power off: Auto : Place both earbuds in the charging case, close the lid.
• Manually : Press and hold the MFT for 5s.
• Play/Pause : Tap the MFT once.
• Next Track : Double tap the right MFT.
• Previous Track : Double tap the left MFT.
• Volume+ : Triple tap the right MFT.
• Volume- : Triple tap the left MFT.
• ANC Mode : Long press the right MFT to switch ANC modes
• Voice Assistant : Long press the MFT for 2s.
• Answer the call : Tap the MFT once
• End Call / Reject : Double tap the MFT

Pairing
Open the charging case, and take out the earbuds, earbuds will pair automatically, One of the earbuds flashes blue and red, the other earbud light goes out.
Activate bluetooth on the device, turn on Bluetooth, search for pairing name “Boult Audio Airbass” and click on it.
Single Mode : When on dual mode, put one earbud into the charging case. Only take one earbud out of the charging case and connect it.
Bluetooth Lost : Turn off mobile phone’s Bluetooth, earbuds will enter pairing mode and can pair with other devices.
If the connection range is exceeded, the earbuds will enter the back connection mode. No connection within 5 minutes, the earbuds will turn off.

Reset

If your earbuds fail to pair, or only one works, reset them.

1. Delete all “Boult Audio Airbass” Bluetooth records on the phone and turn off bluetooth.
2. Put earbuds in the charging case and then take out to pairing modes, tap L&R 5 times simultaneously, hear “DU” prompt voice to clear all pairing.
3. Put earbuds back into the charging case.

Voice Prompt

You will hear ‘power on’ when the headset powers on. You will hear ‘power off’ when the headset powers off. You will hear ‘connected’ when the headset is paired.
You will hear ‘low battery’ when the headset is in low power status
You will hear ‘ANC On / ANC off / Transparent mode when the headset is toggling between different modes

Maintenance Instructions

Warranty is valid/invalid only basis of the below criteria:
The product should be purchased through legal and formal channels to be applicable for warranty.
Damaging the product intentionally/unintentionally, or due to natural disasters, etc. is not covered in the warranty.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>