OIVO IV-SW18137 Switch Controller Charger Dock Station User Manual
- June 10, 2024
- OIVO
Table of Contents
OIVO IV-SW18137 Switch Controller Charger Dock Station
Specification
- Brand OIVO
- Connectivity Technology USB
- Connector Type USB
- Compatible Devices Game Consoles
- Included Components Charging station
- Special Feature Quick Charge, Durable and Safe
- Color Black
- Input Voltage 5 Volts
- Amperage 1.5 Amps
- Total USB Ports 1
What’s In the Box
- Controller Charger Dock Station
- USB-C cable
SAFETY INFORMATION
- You must use the included AC adapter to power the charging station.
- Do not disassemble any of the components. Refer all services to qualified personnel only.
- Do not place or store the product in a humid area and do not expose it to water or rain.
- Use the product only as instructed. Read all instructions before operating the product.
- Failure to follow these directions may void the warranty.
SETUP
- Plug the USB cable of the Controller Charging Base into an available USB port on the Nintendo Switch dock.
- Locate the USB-C Charging Adapter from the storage compartment on the bottom of the Controller Charging Base.
- Plug the USB-C Charging Adapter into the USB-C port of the Nintendo Pro Controller or PowerA Wireless Controller for Nintendo Switch.
- Place the wireless controller onto the Controller Charging Base, ensuring that the USB-C Charging Adapter connects with the charging bar of the Controller Charging Base.
- Slide the Joy-Con™ controllers all the way down onto the Joy-Con channels of the Controller Charging Base.
- LED indicators on the front of the Controller Charging Base indicate the charging status. A red LED indicates charging, while a green LED indicates a full charge.
- Once charged, lift the controller off the Controller Charging Base when you are ready to play!
CHARGING YOUR CONTROLLERS
Set your charging station on a flat surface, then gently push your controller
down onto your charging station’s connector. The LED indicator lights red when
the controller is correctly seated.
Note: Do not use excessive force to connect your controller
LED Signaling
Using the indicators, you may see the state of your charging right away.
Product Description
-
Neat and Durable
A pro controller, four joycons, and convenient storage are all made possible by the design. This maintains order in your game space. -
Saving Energy
The four joycons and the controller are charged simultaneously by the charging station. Power sources or outlets must be greater than 5V/1.5A. -
Very Easy to Use
Simply insert your pro controller’s USB-C cord into the slots, insert the joycons, and leave the rest to the charging station. You’ll get a rapid charge for your controller.
Dimension
Features
-
5 Controllers are charged at once
The Original Pro Controller and four joystick controllers can be charged simultaneously on this switch controller charging dock. devices with universal multiple power above 5V/1.5A. Hence, a computer, wall outlet, USB, PS4/PS5, Xbox, etc. We strongly advise using the original AC adapter to get the fastest speed. -
Clear & Bright LED Indicators
The charging state can be quickly and easily seen thanks to the LED lights. The light will be red while they are charging and turn green after they are fully charged. -
Quick Charging and Complete Security
This switch controller charging station works in conjunction with the original AC adapter to deliver the maximum charge, fully charging two joy-cons in under two hours and the pro controller in under four. -
Five controllers’ organizer and storage
A pro controller and four joysticks may be stored very neatly and securely, keeping your gaming space organized.
FAQs
Is the USB-C Charging Adapter compatible with other controllers?****
Yes, the USB-C Charging Adapter is compatible with all PowerA controllers.
How do I charge the Nintendo Switch Pro Controller?****
The USB-C Charging Adapter is only compatible with the PowerA Wireless Controllers for Nintendo Switch. To charge the Nintendo Switch Pro Controller, you must use the Nintendo Switch AC Adapter.
How do I change my PowerA controller?****
The USB-C Charging Adapter is only compatible with the PowerA Wireless Controllers for Nintendo Switch. To charge your PowerA controller, you must use the USB cable included in the packaging.
What happens if I leave my wireless controller on the charging base overnight?****
The wireless controller will automatically stop charging when it reaches 100%. If you wish to continue charging your wireless controller, simply place it back on the charging base.
How long do Switch controllers take to charge on the dock?****
It takes approximately 3 ½ hours to fully charge the Joy-Con controllers. The Joy-Con Charging Grip (model No. HAC-012) is not included in any Nintendo Switch bundle.
Is it okay to leave Switch charging on the dock?****
Leaving the console on the dock or plugging in directly with the AC adapter overnight, or past the point where the battery is fully charged will not cause harm to the battery.
Does the Switch need the docking station to charge?****
A USB charging cable is supplied with the Nintendo Switch Pro Controller. *A Nintendo USB AC adapter (sold separately) can be used instead of a Nintendo Switch dock and AC adapter.
Is it OK to leave the controller on the charging dock?****
Yes! The charging stand and station double as a display for your controllers. The charging stand or station will stop charging once the batteries have reached full charge and will display a green glow at the base of the stand/station to indicate a full charge.
How do you use a charging station controller?****
Each charging station includes 2 Charge-through battery doors and 2 rechargeable battery packs equipped with hours of gameplay. To charge, simply click Controller down on the charging station and view LED light bars indicating the charge level. When fully charged, click up to store. Focus on the game and not on the charge.
What is the maintenance of the charger controller?****
The charge controller has two internal fuses to protect the circuitry. One spare fuse is included in the unit to replace a blown fuse. If the charge controller fails to function properly, check the fuses and replace the blown fuse with the spare.
What happens to the charge controller when the battery is full?****
Battery charge controllers stop electricity flow when they signal that batteries are full.
How many batteries can a charge controller handle?****
Charge controller capacities range from 4 to 80 A and multiple charge controllers can be used in parallel for larger solar battery systems.
Video – Product Overview
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>