KASSA AROMAS KA A500 Scent Diffuser User Manual
- June 26, 2024
- KASSA AROMAS
Table of Contents
KASSA AROMAS KA A500 Scent Diffuser User Manual
COMPONENTS
INSTALLATION
- Rotate the atomizer counterclockwise ①, lift up the atomizer and essential oil bottle, and take out the atomizer and essential oil bottle. ②
- Hold the essential oil bottle and rotate it counterclockwise to take out the essential oil bottle to separate it from the atomizer, and fill it with essential oil (115ml, the max limit). ③
- Tighten the essential oil bottle clockwise into the atomizer. ④
- Put the essential oil bottle and the atomizer into the machine, and tighten it clockwise (no need to correct the direction). ⑤
- Set working hours and start using the equipment.
PRECAUTIONS
Description of LCD display
Operating instructions:
- Connect the power cord to the power adapter (5V-2A), this device has a charging function.
- Connect the cord to the Type-C IN.
- The power adapter is plugged into the power socket, and the device is powered on. (Charge before first use, once fully charged you may unplug and use wirelessly).
Controlling Instructions:
When the diffuser is charging, the lights flash progressively. Then the light goes out when the battery is fully charged.
You may now unplug and start using it or you may use it while plugged.
To turn on, just press switch button. The button will light up blue while on. To turn it off then press the switch again and it will turn off.
Low battery: ‘ON/OFF’ button is red and unable to turn on by tapping the key.
- Touch (manual) Mode :
-
By pressing the button you can switch between gears 1-3 (manual mode) or leave it pressed for a few seconds to switch to the bluetooth mode. (see bluetooth mode)
1st gear: work for 60 seconds/pause for 60 seconds (most fragrance)
2nd gear: work for 60 seconds/pause for 180 seconds (Middle fragrance)
3rd gear: work for 60 seconds/pause for 300 seconds (Least fragrance) -
If you want, you may set the countdown time for 1/2/4/8 hours in turn by touching with corresponding indicator lights on.
-
Last setting used will be the default settings for next use.
- Bluetooth Mode:
- Touch and leave the pressed for a few seconds to switch to the bluetooth mode .The gear lights will turn off and the bluetooth sign will light up instead. You are now in bluetooth mode.
- Make sure to turn on Bluetooth on your phone.
- The Bluetooth indicator light flash slowly when it connects to your phone. You are now in bluetooth mode. The Bluetooth indicator flashes quickly during data transferring.
- Go to the APP instructions to do the APP setup.
- Last setting used will be the default settings for next use.
Please note when in bluetooth mode the device stays always on. The aroma releases and stops only based on the schedule but the actual machine stays on. The schedule is for controlling the diffusing of the aromas not turning on/off the device.
MAINTENANCE
In order to ensure the best diffusing effect, please check and maintain the device every six month, or when you replace a new fragrance, or when the diffusing effect gets weak. Follow these steps:
- Turn off diffuser.
- Take off the oil bottle.
- If using the same bottle that comes originally with the diffuser clean it with warm water and soap and measure it is completely dry before you put in a new fragrance to avoid the fragrances mixing. The diffuser is waterless, make sure it is completely dry. (Do this step any time you are switching to a completely new fragrance)
- After cleaning the empty oil bottle, fill the bottle with a little alcohol and install it on the device, then run the device for about 5-8 minutes to clean the internal mechanism.
- After the device is clean, turn it off. Unscrew the bottle. Make sure to dispose of any alcohol remaining inside the oil bottle and dry it before putting in the new fragrance oil.
- Put the bottle back into the diffuser.
- Turn it back on.
