TnB UMLEDCLIP LED Bicycle Wheel Lights Instructions
- June 3, 2024
- TnB
Table of Contents
TnB UMLEDCLIP LED Bicycle Wheel Lights Instructions
OUR THANKS
Congratulations on your purchase and thank you for the trust you have placed in T’nB. Our products comply with the all relevant regulations and standards. Before using this equipment, we recommend that you read the instructions and safety instructions carefully and keep this manual for future reference.
IMPORTANT SAFETY INSTRUCTIONS
- No guarantee will apply in case of misuse.
- T’nB accepts no liability if the safety instructions are not respected.
- Handle the device with care.
- The power supply of your device must match the initially specified characteristics.
- The socket of the electrical equipment must be located near the said equipment and easy to get to.
- Keep the device away from flammable objects, explosive substances or dangerous objects.
- Use and store your device in an environment where the temperature is between 0°C and 40°C.
- Store your device out of the reach of children.
- This device is not designed to be used by persons (including children) whose physical, sensory or mental capacities are reduced, or persons without experience or knowledge, except if they are supervised or receive prior instruction on using the device by a person in charge of their safety.
- Do not disassemble your device and do not attempt to repair or modify it yourself.
- Stop using your device if it has been hit or damaged.
- To avoid the risk of electric shock, disconnect your device from the mains and from any other device before cleaning it or when not in use.
- Only use the supplied accessories and connectors. The use of any other type of accessory not intended for this purpose may irremediably damage your device.
- Make sure the appliance is switched off and cold before cleaning. Do not use any product or lubricant which may damage the appliance.
- T’nB accepts no liability for damage caused by misuse of the product or by use with an incompatible electrical device.
- Unless otherwise stated, never use your device in rain, in damp places or near a water source.
- Unless otherwise stated, this product is for indoor use only.
- Never look directly at the LED light beam. Do not point it directly into the eyes of a person or animal. This product may emit optical rays that are potentially dangerous.
- This product contains a button battery. Swallowing the battery may cause serious internal burns in just 2 hours and may cause death.
- Keep new and used batteries out of the reach of children.
- If the battery compartment does not close properly, do not use the product and keep it out of the reach of children.
- If you think that any batteries have been swallowed or placed in any part of the body, consult a doctor immediately.
DESCRIPTION OF CONTENTS
INSTALLATION
Clip the LED light onto the spoke of your bike wheel.
5- USE
Turn the LED light (1) clockwise to turn it on. It will then start flashing. To turn it off, turn the LED light (1) counter clockwise.
MAINTENANCE AND STORAGE
Before cleaning, make sure that the device is turned off, Do not use solvents, abrasive detergents or products that could damage the device, Wash by hand only.
FEATURES
Battery
| 2 X 1 CR 927 battery
---|---
Battery Life|
50 hours
FURTHER HELP?
Customer satisfaction is one of our major concerns. You can contact us on info@t-nb.com. For maintenance, troubleshooting and more information on the product, please visit our website www.t-nb.com,
Direct current
To indicate on the rating plate that the equipment is suitable for direct
current only; to identify relevant terminals.
T’nB SA France/ Rue Nicolas Joseph Cugnot
Pa de La Crau/ 13300 Salon-de-Provence
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>