MASTECH MS6610 Digital Light Meter User Guide
- June 5, 2024
- MASTECH
Table of Contents
MASTECH MS6610 Digital Light Meter
Special attention should be paid when using the test and measurement instrument because the improper usage may cause electric shock and damage the equipment.
Introduction
- Use proper measurement category (CAT), voltage, and amperage rated probes, test leads, and adapters for the measurement.
- Do not use or store the device around explosive gas, vapor, or under high temperature and humidity.
- When handling the test probes and crocodile clips, keep your fingers behind the physical guard.
- Examine the measuring test leads (if present) before use. Any element of which the insulation is deteriorated (even partially), replace them with proper functional test leads.
- Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
- Before measuring the current, make sure the instrument fuses available and disconnect the power supply to the circuit test
- Remove the batteries if the device is not used for an extended period of time, or if stored in temperatures above 45 °C. If the batteries are not removed, battery leakage can damage the device.
Contents
Specifications
- Range
- Resolution
- Accuracy
CHARGING
MEASURING PROCEDURE
EMEA
MGL EUMAN S.L. C/ Picu Castiellu, Parcelas i1-i4 33163, Argame Morcín,
Asturias, Spain
Tel: +34 985-08-18-70
Email: cs.emea@mgl-intl.com
USA
MGL AMERICA, INC. 2810 Coliseum Centre Drive, Ste. 100 Charlotte, North
Carolina 28217 USA
Tel: +1 833-533-5899
Email: cs.na@mgl-intl.com
UNITED KINGDOM
MGL GROUP U.K. LIMITED 14 Weller St, London, SE1 1QU, UK Tel: +34 985-08-18-70
Email: cs.uk@mgl-intl.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>