OIVO TYX-587 Wireless Gaming Keyboard User Manual

Wireless Keyboard
User Manual
TYX-587
Patent No.: ZL201530514300.7

Product application and function

1. It is User Manual for New Generation TYX-587 Xbox One (S) keyboard.
2. This product is designed for Microsoft Xbox One (S) controller and it can connect with original Xbox One (S) old and new controllers perfectly, also with the headphone. It is compatible with the various systems of Xbox One (S) consoles (as image 1). It can input fonts, text, and symbols conveniently and quickly.
3. The players can group chat with this product comfortably.It is easy to connect and take out of the controller and also can combine with any version of Xbox One (S) original controller, and provide the gaming function of text inputting, group chatting and playing game as well.
4. Its key surface is using the imported environmental protection silicone and the metal dome switch to make it more comfortable at its bottom.

 Keyboard interface Introduction

Keyboard interface Introduction

1.  Connect the power for Xbox One (S) console firstly then connect the HDMI cable with LCD equipment, open the Xbox One (S) console and the relevant indicator will be on.

2. Connect the Xbox One (S) controller with its console. (you can refer to the console manual)
   

3. Aim two joint pins of this product at the pilot hole of the Xbox One (S) controller, and its headset jack at the bottom of the Xbox One (S) controller. then push this product into the Xbox One (S) controller slowly and securely until connect.( For the new controller it needs to use the 3.5 audio jack to remove the silicone by arrow direction at the bottom of the keyboard, then rotate 3.5 audio jack outward until it is connected.)

4. The XboxONE controller indicator light will light up after pressing the key “ ”.At this time,the keyboard backlight will light up too. If the keyboard does not operate within 10 seconds, the backlight will automatically go into a power-saving state.( Manually hold down the Shift key, then press the Space key can be forced to turn off or on the keyboard backlight)
   

5. After the connection, insert the included 2.4G receiver into any USB port of the Xbox One (S) console, and enter the pairing key on the back of the Xbox One (S) keyboard within 15 seconds. It will be automatically paired while the blue indicator will glitter. (Note: when pairing,the distance between keyboard and receiver must be within 0.5 meters,if it fails, do the above steps again.)
   

6. This products pairs and can do regular work, when its blue indicator will turn off.

7. Pair only once between the Xbox One (S) keyboard with 2.4G receiver. Open the console to awake the controller automatically for further use.
   

8.  The Xbox One (S) headset jack of this product can be compatible with the Xbox One (S) original headset and have the same effect as connecting with the controller, the new controller also can be compatible with the original earphones for PS4 and iPhone.

9. This product is in sleeping mode while the Xbox One (S) controller sleeps, please press “ ” Button to awake it and the controller.
   

10.  Hold down the “Shift” key and select the key you need, then you can type the corresponding symbol.

11.  Press the Caps lock key to Lock the capital input, and press this key again to change into lowercase input.
    

Technical parameters:

1. Applicable range： suitable for Xbox One (S) the first and second original controller and elite controller.
2. Wireless Protocol：2.4G
3. Wireless distance: effective range 8-10 meters
4. Working current(backlight on):40mA
5. Working current(press any key when the backlight off): 0.8mA
6. Working current(backlight off and without any operate): 8uA
7. Product dimension：1426345mm
8. Material： ABS

Matters need attention:

In order to use this Bluetooth product correctly, and ensure a good performance, please read carefully and comply with the following:
※ Do not hit the keyboard seriously.
※ Do not let this product contact with benzene, thinner, or chemical. etc.
※ Do not be close to a strong magnetic field, or electric field.
※ Please avoid direct lighting or heating apparatus.
※ Do not disassemble, repair or reconstruct by yourself.
※ Please classify and deal with the waste packaging, batteries and old electronic products properly.

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>