INNOVA Air Leaf LC0171 Floor Feet and Aesthetic Back Panel Kit Instruction Manual
- June 10, 2024
- InnOVA
Table of Contents
LC0171 – LC0173 – LC0175 – LC0177 – LC0179 – LC0605
Mounting kit
**** This instruction is an integral part of the booklet of the appliance on which the kit is installed. Please consult this booklet for general warnings and fundamental safety rules.
Ground anchor feet kit
Use this kit when installing the fan radiator/fan coil on the floor in front of windows or when wall installation is not possible.
-
Assemble the locking tabs onto the right and left support brackets using the self-tapping screws provided.
-
Rest the back of the appliance on a horizontal surface;
-
Fit the tooth formed by the just fastened tab into the lower front part of the fan radiator/fan coil structure;
-
Fasten the back of the right and left support brackets, using the self-tapping screws provided
-
Secure the right and left support brackets at the bottom using the M6 screws provided;
-
Drill, within the drilling area shown on the template provided, 4 holes in the floor for the plugs to ensure the hydraulic and electrical connections can be routed.
N.B. Use plugs suitable for the particular kind of flooring and the weight of the appliance; -
Return the machine to vertical position, position it and secure it to the floor using the 4 locking tabs provided.
Tighten the 4 plugs.
**** Check that the appliance is properly secured and the plugs ensure its stability.
| A | locking tabs |
|---|---|
| B | self-tapping screws |
| C | lower front part |
| D | M6 screws |
Rear closing panel
The rear closure panel must be installed together with the GROUND ANCHOR FEET
KIT LA0604 or LB0605.
Use the rear closing panel when the back of the coolerradiator/cooler-
convector is in view (for example, in front of a window).
- Rest the machine with the front panel on a flat surface, taking care not to damage it;
- unscrew the two rear bracket fixing screws in correspondence with the fixing holes on the panel;
- position the rear panel on the back of the machine;
- clip the panel onto the top of the back of the structure;
- fix the panel with the two screws previously loosened.
| A | rear panel |
|---|---|
| B | the top of the structure |
| C | screws |
The technical data and aesthetic features of the product can be modified and
INNOVA reserves the right to modify them without notice at any time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>