OUKITEL RT6 Rugged Tablet User Manual
- June 10, 2024
- OUKITEL
Table of Contents
OUKITEL RT6 Rugged Tablet
Product Information
This product is designed to provide users with a reliable and efficient solution for their needs. It is made of high-quality materials and has undergone rigorous testing to ensure its durability and performance. The product comes with several features that make it easy to use and maintain.
- Reliable and efficient
- High-quality materials
- Durable and performance-tested
- Easy to use and maintain
Product Usage Instructions
- Before using the product, ensure that it is properly assembled and all components are securely attached.
- Make sure that the product is placed on a stable surface and is level.
- Connect the product to the appropriate power source.
- Refer to the user manual for detailed instructions on how to operate the product.
- When finished using the product, turn it off and unplug it from the power source.
- Clean the product according to the instructions in the user manual.
- Store the product in a dry and secure location.
By following these usage instructions, users can ensure that their product functions properly and lasts for an extended period of time. If users have any additional questions or concerns, they should refer to the user manual or contact customer support for assistance.
OVERVIEW
Accessories
assembly order
Gift products
Battery
- Includes an internal battery. You can track your battery status with the icon shown on the top right of the screen.
Warning
- Use only OUKITEL-approved batteries specifically designed for you phone.
- Incompatible batteries can cause serious injuries or damage to your phone.
- Never place batteries or phones on or in heating devices such as microwave ovens, stoves,or radiators. Batteries may explode when overheated.
How to insert the card
To make sure your pad is able to make calls, insert the SIM card in the following order.
- Insert and press the ejector pin into the hole in the side to pop the card tray.
- Take out the card slot and place 2 Nano cards or a Nano card and TF card with the metal side facing down. Ensure the bevel angle of the card slot and the SIM match.
- With the pad facing up, insert the cardholder into the pad in the direction of the arrow.
How to boot
- Non-removable battery
- Press the power button for 3-5 seconds to boot
How to send SMS, MMS
SMS
- Open the SMS app
- Select New Information
- Enter a phone number or browse your contacts
- Select Edit Information and enter your text
- Send
MMS-video
- When writing a text message
- Select images, videos, or other files you want to add, even you can take a new picture or video right away
- Selecting or sending
SAR
- The maximum electromagnetic radiation absorption ratio (SAR) of this product is s2.0W/kg
- In line with the requirements of the national standard GB 21288-2007
- EN62209-1:2016; EN 62209-2:2010; EN 62479:2010;
- EN 50360:2017; EN 50566:2017;
Safety
In order to ensure safety during use of the product, you must strictly abide by the following rules
- The pad should be at least 15cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
- Do not expose the device and other batteries together with high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens, or water heaters.
- Overheating of the battery can cause an explosion.
- When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the outlet.
- If the device is equipped with a non-removable battery, do not replace the battery by yourself to avoid damaging the battery or the device.
- Use of an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
- Do not disassemble or reset the battery, insert other objects, or immerse in water or other liquids to avoid battery leakage, Overheating, fire or explosion.
- Do not drop, crush, scratch, or puncture the battery to avoid subjecting the battery to excessive external pressure, Which may result in internal short-circuit and overheating of the battery.
- The company does not bear responsibility for accidents caused by non-standard related charging equipment. If you want to read the full CE compliance, please check this link: http://www.oukitel.com
Maintenance
- Thoroughly understand the maintenance of this pad to use the pad more safely and effectively, and extend the service life of the pad as much as possible.
- Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other
- Please avoid dropping, knocking, or shaking your pad. Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
- Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water and mild soap.
- Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display. When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.
- This machine’s standard package (Package box-Pad-Manual-Protective film-Protective case-Headset-USB data cable-OTG cable-Charger)
Comes with the GoogleM app and Google Chrome.
Android is a trademark of Google LLC.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
SAR Information Statement
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluations of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. when worn on the body, as described in this user guide, is 1.159 W/kg (Body-worn measurements differ among Tablet models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines.
SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: 2ANMU-RT6SPU Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
Manufacturer
- Manufacturer Name: Shenzhen YunJi Intelligent Technology CO., LTD
- Manufacturer Address: A-side A2 Building 2/F Enet New Industrial Park, No.20 Dafu Industrial Zone, Aobei Community, Guanlan, Longhua New District, Shenzhen China
- Website: oukitel.com
