X-SENSE SDA51 Smart Driveway Alarm User Manual

User Manual
Smart Driveway Alarm

SDA51

This user manual contains important information regarding the operation of your smart driveway alarm. Ensue you read this user manual full before installing and operating the alarm. If you are installing this device for use by others, you must leave this manual (or a copy of it with the end user.

Introduction

The smart driveway alarm is a simple but effective security measure that can help protect your home from burglars and other unwanted intruders. It detects movements from pedestrians, vehicles, and large animals, then sends an alert to
your smartphone when triggered,

Product Overview

Package Contents

Device Setup

Download the X-Sense Home Security App

https://play.google.com/store/apps/details?id=com.xsense.security

To download the X-Sense Home Security App, scan the OR code or search for “X-Sense Home Security” in the Apple App Store or Google Play Store. Sign up with a valid email address. If you already have an account, make sure the apps updated to the latest version.

Note: Make sure your smartphone supports i0S 11 and higher, or Android 8.0 and higher.
Before connecting devices, make sure that:

1. You know your Wi-Fi network name and password.
2. You are connecting your device using a 2.4 GHz Wi-Fi network (incompatible with 5 GHz Wi-Fi network).
3. Make sure the Bluetooth on your phone is turned on.

Note: When the device is configured via Wi-Fi, make sure your mobile phone and device are as close to the router as possible, which can speed up device configuration.
Connect the Smart Driveway Alarm to the Base Station
The smart driveway alarm can be connected to the base station through the wireless network When the alar is connected to the base station, you will receive: push notifications wherever you are to stay informed of the device status.

Note: Before adding devices to the system, make sure the base station has been successfully added to the app.

1. Tap “ + “, and select “Driveway Alarms” in the product list Then, tap “Next” to enter the pairing page.
2. Enter a name for the alarm. Then tap “Next.”
3. Follow the prompts on the page by quickly pressing the pairing button twice on the device until the LED flashes blue rapidly, indicating that the device is waiting to connect to the Wi-Fi.
4. Tap “Next” to add the device. You will hear “Ready to add the device.”
5. After successfully connected, you will hear “Device added” and the “Device added” page will appear. Then, the app page will go to “Installation & Setup.” Follow the instructions to complete the installation. Now, you can find the alarm in the device list.
6. If you want to add multiple devices into the system, please repeat the above steps.

NOTE: If you fail to add the alarm to the network within 60 seconds, the device will automatically exit the network configuration. To re-enter the network configuration, you need to repeat the above steps.

Installation Method

Before installation:
Please fully charge the driveway alarm prior to installation using the micro USB cable (included in the package). This will take several hours. The LED indicator turns red when charging and blue when fully charged.
Note: If you can’t wait to use your driveway alarm, go ahead and set it up. However, we recommend you to fully charge it before installing it.

Gather the necessary items before installation:
Package Contents:

Items Not Included:

Choose Installation Location
Follow the instructions below to choose the proper installation location, but don’t install it just yet:

1. The detection range s up to 33 ft (10 m)
2. Make sure the driveway alarm is perpendicular to the ground on a hard surface at a height of 3 ft (09 m). Do not point it either up or down.

Installation Notes
“The driveway alarm should overlook the open detection area; it should not point at trees and shrubs.

Make sure sunlight can reach the solar panel directly, but avoid placing the sensor eye in direct sunlight, as this can cause false alarms.

Signal Test
Tap the Signal Test button to confirm whether the signal transmission is normal between the alarm in this location and the base station, s well as whether the installation location s suitable.
When the test i over, an in-app message will tell you the signal transmission is normal,

Note: To conduct a proper test, please ensure that you take the driveway alarm to the instalation location you have chosen (outside).

Installation Steps

1. Use the mounting bracket to mark 3 screw holes. On all 3 marks, drill holes 1.381n (35 mm) deep using the electric drill. Then insert the anchor plugs and screw the mounting bracket using the included screws.
2. Attach the alarm to the mounting bracket and tighten it Make sure the silicone cap on the bottom is properly installed.
3. Make sure the alarm is perpendicular to the ground. Do not point it either up or down,
4. Make sure the alarm is mounted horizontally and not angled;

Motion Test
Tap the Motion Test button and walk around your driveway to ensure the detection area s covered.
A message will be displayed if the driveway alarm is triggered if you do not see any message displayed, please follow these instructions to fix it.

1. Make sure your phone and base station have a stable network connection
2. Place the driveway alarm closer to the driveway.

Sensor Sensitivity
You can go to the Sensor Sensitivity of the Device Settings to adjust the sensitivity of the sensor. Please note that the higher the sensitivity, the more like the alarm will be triggered. You can lower the sensor sensitivity to reduce false alarms.
Push Notification Interval
You may set a push notification interval to avoid excessive alarms. You will only receive one push notification during an interval, even if the driveway alarm is triggered multiple times. Please note that a shorter push notification interval may result in a shorter battery life.

Technical Specifications

Specifications of Smart Driveway Alarm

of the device is perpendicular to the ground, the detection distance is 33 ft (10 m).
Detection Angle| Horizontal: 50°; vertical: 10°
Battery Life| Estimated battery life under full charge (without sunlight) is approximately 3-4 years when triggered 20 times a day. This estimate is based on the assumption of pure battery usage.
Product Life| 5 years
Operating Temperature| 14-140°F (-10-60°C)
Waterproof Rating| IP65
Product Materials| ASA + high weather-resistant silicone
Mounting Method| Screws
Installation Location.| Outdoors on a flat surface
Alarm Volume| Driveway alarm does not sound when the device is triggered, only the indicator light will flash; the base station sounds an alarm and the indicator ight flashes at the same time.
Indicator Light| Red/Blue
Maximum Number of Interconnected Units| 50 devices can be added to the SBS50 base station
Operating Frequency| 915 MHz
Connection Distance (in Open Air)|  [PIINIIGRL]
WiFi Frequency| 24 GHz (incompatible with 5 GHz Wi-Fi network)

LED Indicator of Smart Driveway Alarm

Troubleshooting

station. The maximum distance between the alarm and the base station s 2,000 ft (600 m) in an open environment, which is affected by walls and obstacles
Move the base station to the side of the house closer to the alarm, and do not place the base station in a confined space (especially a metal object)
The reis no alarm when an object passes by.| The instalation height of the device i5too high or too low.| Install at  height of 3 ft (0.9 m) from the ground
The device is not perpendicular to the ground.| Make sure the alarmist perpendicular to the ground. Do not point it either up or down
The device is not kept level,| Make sure the device is level and not tilted,
The sensor s not facing the monitored area.| ‘Adjust the angle of the bracket to make sure the sensor faces the monitored area
The moving object s not within the monitoring distance.| The monitoring distance is 33 ft (10 m). The moving object can be monitored only when
it is within the coverage range. To confirm it is functioning properly, you can simply tap  on the driveway alarm on the app’s homepage. This will take you to the Installation & Setup section, where you can access the Motion Test function.
The moving speed of the monitored object is too fast.| The device may not be able to detect objects moving faster than 25 mph (40 k/h).
The temperature of the monitored object is too close to the  ambient temperature| The device is primarily triggered by the temperature difference between the | monitored object and the surrounding environment. f this difference is minimal (e, in the case of an electric car that has just started), the device may not detect any changes,
The size of the monitored object is to0 small| The device Is pearly designed to Detect humans, cars, and large animals, Smaller objects, such as small dogs, may not be detected.
The temperature is too low.| The device’s working temperature range is 14-140° (10-60°C).If the temperature falls
below 14 (-10°C), the monitoring distance  may be shortened or the device may network at all. However it should return to normal once the temperature ices
‘The communication between the device  and the base station s blocked or the distance is too far.| Reduce obstacles between the device and the base station, and the maximum distance allowed in an open environment is 2000 ft (600 m).
‘The network connection of the. router and the mobile phone s abnormal.| Make sure the network connection of the router and the mobile phone is. normal,
There are false alarms even if there is no object passing by.| The instalation height of the device s too high or too low.| Install at a height of 3 t (0.9 m) from the ground
The device is not installed on a stable surface, and it may shake firm side to side due to factors such as wind.| Mount on a hard surface.
The device is not
perpendicular to the | ground.| Ensure that the alarm is mounted perpendicular to the ground and not pointed either upwards or  downwards If the device is facing upwards, it may be triggered by sunlight i’ facing downwards, it may be triggered by small animals on the ground
The device sensor i facing an object that s moving or shaking (such as a bush).| Position the device sensor facing an open area, and not towards trees or bushes.
Flying insects have entered the device sensor.| Clean the device sensor.
Sanity i set too high,| Tap on the driveway alarm icon on the app homepage to access the Sensor Sen suavity setting and adjust it to either Low or Medium.
There is a small animal approaching the sensor.| The device may also be triggered by small animals, such as birds, when they come into close proximity o the: sensor.
Special weather conditions| The device may be triggered by some special weather conditions, such as a quest of hot air blowing when the ambient temperature  relatively low.
The solar panel does not work|   None.| Clean the surface of the solar panel to remove any duster did, and the device should resume normal operation.
It is unclear how  to keep the device
waterproof.| None| Make sure the silicone plug on the bottom of the device s closed.
It is unclear how to disarm the
Giveaway alarm.| None.| The device does not have a disarming feature, However, in the Device Settings, you can disable the “Enable Alarm Sound” option. By doing 5o, the base station will not emit any sound when triggered. Add optionally, in the Notifications section, you can turn off “Device Triggered” to stop receiving push notifications when the device s triggered.
It is unclear how to tum off the
flashing red light of the alarm when
it is triggered.| None| In the Device Settings, you can disable the “LED indicator” option. By doing 0, the sensor eye won’t term on making it unnoticeable when triggered.
The alarm cannot. be added to the
base station.| The alarm did not enter pairing mode.| Quickly press the pairing button twice on the alarm until it flashes blue rapidly, indicating it has entered pairing mode.
The app push notifications
delayed or there. are no push alerts.| The battery runs out| Unscrew the driveway alar from the bracket, bring the unit in doors to charge, and in stilt back.
The app push notification permission is abled.| Tum on the push notification permission on the phone.
The base station s not within the network coverage of the router| The distance between the base station and the router should be within 170 t (50 m). Please ensure that the base station is always within the network coverage of the router.
The communication
between the alarm  and base station is not  stable or they are too fara part.| Reduce the obstacles between the alarm and base station. The maximum distance between the alma and the base station in an open environment s 2000t (600 )
The network connection of the  router and the mobile phone s abnormal.| Make sure the network connection of  the router and the mobile phones normal,
The app shows that the alarms off line.| The communication  between the alarm and the base station is blocked or the distance is too far.| Reduce the obstacles between the alarm and the base station. The: maximum distance between the alarm and the base station is 2,000 ft (600 m) in an open environment.
The battery runs out,| Charge the battery.
The app prompts low battery|  Low battery warning.| Charge the battery

Environmental Protection

**** Waste electrical products should not be disposed of with household waste. Please recycle where faculties exist. Check with Local Authority or entailer for recycling advice.

Manufacturer and Service Information

X-Sense Innovations Co,, Ltd.
Address: B4-503, Kexing Science Park, 15 Keyuan Road, Shenzhen, 518057, CHINA
Email: support@x-sense.com

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

X-Sense Innovations Co., Ltd.
Email: support@x-sense.com

http://www.x-sense.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>