HECATE G33BT Wireless Low Latency Gaming Headset User Manual

HECATE G33BT Wireless Low Latency Gaming Headset

PRODUCT MANUAL

PRODUCT ACCESSORIES

Note: The pictures in this manual are all schematic diagrams, which may deviate from the actual product, please refer to the actual product.

CARE AND MAINTENANCE

When using, please read the following suggestions to help you comply with the warranty terms and extend the life of the product.

• Keep the product dry and do not place it in a humid place, so as not to affect the internal circuit of the product. Avoid using this product during vigorous exercise or sweating a lot to prevent sweat from penetrating into the product and damaging the product.
• Do not place the product in a place exposed to sunlight or high temperature. High temperatures can shorten the life of electronic components, damage batteries, and deform certain plastic parts.
• Do not place the product in a cold place to avoid damage to the internal circuit board.
• Do not try to disassemble the product. If you are not a professional, it may damage the product.
• Do not drop, vibrate strongly, or hit the product with hard objects, so as not to damage the internal circuit.
• Do not use harsh chemicals or detergents to clean the headset.
• Do not scratch the surface of the product with a sharp object, so as not to damage the shell and affect the appearance.
  If the product does not work properly, please send it to your qualified maintenance organization, and the staff will be eager to help you solve the problem.

SAFETY PRECAUTIONS

• Please read it carefully and keep it for future reference.
• Please follow the instructions in the manual for correct use.
• It is recommended to use this product in an environment of 0-35℃.
• The product is not a toy. Children under 14 must use it under the supervision of an adult.
• To reduce the risk of fire and electric shock, do not expose this product to rain or moisture.
• Please do not use this product near any heat sources (such as radiators, heating equipment, stoves or other devices that generate heat).
• Before approaching medical and industrial equipment or boarding the aircraft, please consult the local staff for availability.
• Please dispose of waste electronic products properly. Do not dispose of electrical and electronic equipment, components, batteries and other household garbage together.
• Do not use chemical solvents such as strong acid, strong alkali, gasoline, alcohol, etc. to wipe the surface of the product. If you need to clean it, use a neutral solvent or clean water.

Do not use headphones to listen to music for a long time at high volume. This may cause hearing loss. Please adjust the volume to a safe level. For traffic safety, do not use earphones when driving, biking or crossing roads.

Name and content of hazardous substances in the product

SERVICE REGULATIONS

Thank you for choosing the Edifier headset. To protect your rights, our company provides the following after-sales service:

Consultation service:
Users can call: 4000652688 for consultation or log in: www.edifier.com if they encounter any problems during use.

Warranty service:
Our warranty service does not include the freight and door-to-door service of the repaired product. Users can go to the local after-sales service center to enjoy the one-month replacement (note: provided that the appearance is not damaged and the accessories are complete), and the one-year warranty service provided by our company; if there is no local after-sales service center, the user can directly Find the manufacturer for after-sales service. Please call 4000652688 for details. After the manufacturer’s customer service has confirmed and accepted, please send the after-sales products to the manufacturer’s after-sales department.

Note: Please be sure to call customer service to confirm acceptance.

If the headset is damaged due to the following reasons, no warranty service will be provided:

1. Abnormal use: break the headphone headband and microphone handle wire, break the signal wire, and break the ear shell.
2. Improper storage: If the headset is exposed to a humid environment for a long time, the speaker and microphone are immersed in water.
3. Repairs not authorized by our company.
   • The content on the warranty card does not match the product, and no warranty service is provided.
   • Earphone sheaths, earmuffs, foam pads, and shell cuts are not covered by the warranty.
   • Please bring this card and valid purchase certificate when requesting warranty service. Please keep this card and valid purchase voucher properly, please do not modify the warranty card and purchase voucher by yourself, otherwise it will be deemed invalid.
   • Before using this product, please read the instructions for use of this product carefully.
   • The company reserves the right of final interpretation of the product after-sales service regulations.
   • After-sales receiving phone number: 0769-88986868
   • After-sales delivery address: Rework Team, Edifier Engineering Department, No. 2, Industrial East Road, Songshan Lake, Dongguan

WARRANTY CARD

Fill in the warranty card

Fill in the warran

Product name

| ty card| Sealing place
---|---|---
Product number|
Purchase date|
User name|
User address|
Contact number|
Repair man|
Fault description|

FCC Regulatory Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Regulatory compliance
This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>