EATON B013-HU-4K HDMI over Cat5e 6 Extender with 2 Port USB Hub User Manual

EATON B013-HU-4K HDMI over Cat5e 6 Extender with 2 Port USB Hub

Product Features

• Extend a 4K @ 30 Hz signal up to 130 ft. (40 m) or a 1080p signal up to 230 ft. (70 m) between the source and its console over Cat6 cable
• Deliver uncompressed UHD video and audio without any signal loss or added latency
• Provides a low-cost, reliable solution for distributing HDMI over long distances
• Full bi-directional IR extension optimizes control

Package Includes

• B013-HU-4K HDBaseT HDMI Extender
• (x1) IR-Out Cable
• (x1) IR-IN Cable
• (x1) USB 2.0 A to A (M/M) Cable
• (x2) International Power Supply w/ North America, Europe, U.K and Australia Adapters (Input: 100-240V)
• Owner’s Manual

Optional Accessories

• N202-Series Cat6 24 AWG Solid-Wire UTP Patch Cables
• N002-Series Cat5e UTP Patch Cables
• P569-XXX-CERT or P568-XXX-2A Series High-Speed HDMI 2.0 Cables

Feature Identification

HDBaseT Transmitter (TX) Unit

1. PC USB: Use the included USB 2.0 A (M/M) cable to connect your computer to the transmitter (TX) unit

2. HDMI INPUT: HDMI signal input (connects to your HDMI source device)

3. IR IN: IR signal input

4. IR OUT: IR signal output

5. 12V 1A: Power input

6. Transmission Signal LEDs:
   LED 1 – Power LED
   On: Power is being supplied
   Off: Power is not being supplied
   LED 2 – TX & RX Connection Status LED
   On: Connection link is established between TX & RX units
   Flashing: No connection link is detected between TX & RX units
   LED 3 – HDMI Output LED
   On: HDMI output port is connected to a display
   Off: HDMI output port is not connected to display

7. HDBT OUT: HDBaseT signal output

8. Keyboard Status LED:
   On: Keyboard is connected
   Flashing: Keyboard is in use
   Off: Keyboard is not connected

9. Mouse Status LED:
   On: Mouse is connected
   Flashing: Mouse is in use
   Off: Mouse is not connected
   

HDBaseT Receiver (RX) Unit

1. 1 2-Port USB Hub: Keyboard/mouse connection

2. HDMI Output: HDMI signal output (connects to your HDMI display)

3. IR IN: IR signal input

4. IR OUT: IR signal output

5. 12V 1A: Power input

6. Transmission Signal LEDs:
   LED 1 – Power LED
   On: Power is being supplied
   Off: Power is not being supplied
   LED 2 – TX & RX Connection Status LED
   On: Connection link is established between TX & RX units
   Flashing: No connection link is detected between TX & RX units
   LED 3 – HDMI Output LED
   On: HDMI output port is connected to a display
   Off: HDMI output port is not connected to display

7. HDBT IN: HDBaseT signal input

8. Keyboard Status LED:
   On: Keyboard is connected
   Flashing: Keyboard is in use
   Off: Keyboard is not connected

9. Mouse Status LED:
   On: Mouse is connected
   Flashing: Mouse is in use
   Off: Mouse is not connected
   

Installation

Notes:

• Prior to pulling cables through ceilings/walls, first test to ensure the entire installation works properly.
• To achieve maximum distance and performance, use 24 AWG Solid-Wire UTP Cat6 cable (such as N202-Series cable). Using stranded-wire Cat6 cable or cable with a gauge (AWG) higher than 24 AWG will result in a shorter extension distance. Higher gauge cabling (such as 26 AWG) has a more limited transmission capability than lower gauge cabling.
  

1. Make sure all equipment in the installation is powered off.
2. Using the included USB 2.0 A (M/M) cable, connect the PC USB port on the transmitter to an available USB-A port on your source.
3. Using an HDMI cable (such as P569-XXX-CERT or P568-XXX-2A Series cables), connect the transmitter’s HDMI INPUT port to an available HDMI port on your source.
4. (For bi-directional IR functionality – Optional) Connect the included IR-IN or IR-OUT cable to the transmitter unit.
5. Using a user-supplied Cat5e (such as the N002-Series) or Cat6 (N202-Series) cable, connect one end of the cable to the HDBT OUT port on the transmitter unit. Below is a table of the maximum distances that can be extended with Cat5e and Cat6 cables.
   Category Cable| Max Cable Length| Max Resolution Supported
   ---|---|---
   Cat5e| 115 ft. (35 m)| 4K x 2K @ 30 Hz
   197 ft. (60 m)| 1920 x 1080 @ 60 Hz (1080p)
   Cat6| 130 ft. (40 m)| 4K x 2K @ 30 Hz
   230 ft. (70 m)| 1920 x 1080 @ 60 Hz (1080p)
6. Connect the other end of the Cat5e/Cat6 cable to the HDBT IN port on the receiver unit.
7. Connect your keyboard and mouse to the USB ports labeled Keyboard/ Mouse on the receiver unit.
8. Using an HDMI cable (such as the P569-XXX-CERT or P568-XXX-2A Series cables), connect the receiver’s HDMI OUTPUT port to a display (TV/monitor).
9. (For bi-directional IR functionality – Optional) Connect the included IR-IN or IR-OUT cable to the receiver unit.
10. Connect the included power supplies to the transmitter and receiver units, then to an available wall outlet.
11. Turn on the power to your HDMI source and remote display.

Specifications

mm
Weight| TX: 0.49 lb. / 220 g
RX: 0.5 lb. / 230 g

Warranty

3-Year Limited Warranty

We warrant our products to be free from defects in materials and workmanship for a period of three (3) years from the date of initial purchase. Our obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. Visit Tripp Lite. Eaton.com/support /product-returns before sending any equipment back for repair. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.

EXCEPT AS PROVIDED HEREIN, WE MAKE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL EATON BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, we are not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

WEEE Compliance Information for Customers and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Eaton they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.

Eaton has a policy of continuous improvement. Specifications are subject to change without notice.

Customers Support

Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2023 Eaton
All Rights Reserved
Publication No. 23-06-466 / 93-395F_RevB
July 2023

Eaton is a registered trademark.
All trademarks are property
of their respective owners.

References

• eaton | Eaton

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>