ETECH I7X True Wireless Earbuds User Guide
- June 5, 2024
- Etech
Table of Contents
True Wireless Earbuds
**User Guide
**
Charging
Take a Look
In the Box
Powering On/ Bluetooth Pairing
Press & hold both power buttons simultaneously for 3-4 Seconds
Once your earphones are powered on the LED Indicator Lights will alternately flash red and blue. After approximately 8-10 seconds, the lights on the master earphone will ontinueflashing this way while the LED indicator turns off on the second earphone. This means both earphones are paired together.
Check your phone’s Bluetooth settings menu. Make sure that Bluetooth is turned ON. Connect with the device listed as TWS Earbuds.
Controlling Your Earphones
One-Click: Play/Pause/Answer Incoming Call/End Call
Two Rapid Clicks: Redial Last Number
Press and Hold: Reject an Incoming Call
Hold 2 seconds: Next Track
Hold 4-5 Seconds: Power Off (When Not Receiving a Call)
Using the Case
Note: Press the power botton on the charging case, and the earphone will be charged.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged try to correct the interference by one or more of
the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
FCC ID:2AS5O-I7X
Specifications
Bluetooth Version: BT5.0
Earbud Battery: Li-polymer 30mAH*2
Charging Case Battery: Li-polymer 200mAH
Charging Time for Earbuds: Approximately 1-2 Hours
Playing time: Approximately 1.5Hours (under 50% volume)
Bluetooth Working range: 10M
Keep Manual and All Relevant Information for Future Reference
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>