rapoo V500PRO Backlit Mechanical Gaming Keyboard User Guide
- June 6, 2024
- rapoo
Table of Contents
Quick start guide
V500PRO
Backlit Mechanical Gaming Keyboard
Overview
A Num lock indicator
B Caps lock indicator
C Scroll lock indicator
Fn+F1 = Ripple mode
Fn+F2 = Static mode
Fn+F3 = Reactive mode
Fn+F4 = Breathing mode
Fn+F5 = Starlight mode
Fn+F6 = Roulette mode
Fn+F7 = Curve mode
Fn+F8 = Aurora mode
Fn+F9 = Firework mode| Fn+F10 = Raindrop mode
Fn+F11 = FPS gaming mode
Fn+F1 2 = MOBA gaming mode
Fn+Win =Win Lock
Fn+→ = Frequency+
Fn+←= Frequency-
Fn+↑ =Brightness+
Fn+↓ = Brightness-
Fn = Light up Fn and combination keys
---|---
Troubleshooting
I always press the Windows key while gaming.
Press Fn and Windows key simultaneously to lock the Windows key and prevent
accidental activations.
System Requirements
Windows ®XP / Vista / 7 / 8 / 10 or later, USB port
Package contents
Warranty
The device is provided with a two-year limited hardware warranty from the purchase day. Please see www.rapoo.com for more information.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. This equipment complies
with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may
cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user authority to operate the equipment.
ISEDC RSS warning
This device complies with Industry Canada licence-exempt RSS standard (s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,including interference that may
cause undesired operation of the device. Le present appareil est conforme aux
CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisee aux deux conditions suivantes:
(1) (‘appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de (‘appareil doit accepter tout brouillage radioelectrique
subi, meme si le brouillage est susceptible d’en compromettre le
fonctionnement.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
It is forbidden to reproduce any part of this quick start guide without the
permission of Shenzhen Rapoo Technology Co., Ltd.
Declaration of Conformity
We, the manufacturer
Shenzhen Rapoo Technology Co., Ltd.
Fax: +86-0755-2858 8555
Declare that the product
Product Name: Backlit Mechanical Gaming Keyboard
Model No: V500PRO
Complies with the following norms of:
EN 55032:2012
EN 55024:2010
EN 61000-3-2:2014
EN 61000-3-3:2013
ROHS: 2011/65/EU
The product is in compliance with the essential requirements of The EMC
Directive 2014/30/EU, and the ROHS directives 2011/65/EU.
Manufacturer/Authorised representative
Kai Guo, Manager
R&D Department
Date of Issue: Jun. 30, 2017
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>