INDESIT IWDC6105 Washer Dryer Instruction Manual

INDESIT IWDC6105 Washer Dryer

Operating Instructions

Control panel

1. Switch the washer-dryer on by pressing the ON/OFF button. All indicator lights will switch on for a few seconds, then they will switch off and the START/PAUSE indicator light will pulse.
2. Load laundry and close door.
3. Set the WASH CYCLE knob to the desired program.
4. Set the washing temperature.
5. Set drying cycle if necessary.
6. Measure out the detergent and washing additives.
7. Select the desired functions.
8. Start the wash cycle by pressing the START/PAUSE button and the corresponding indicator light will remain lit.(To cancel the set wash cycle, pause the machine by pressing START/PAUSE button and select a new cycle).
9. At the end of the wash cycle the END indicator light will switch on. The door can be opened once the DOOR LOCKED indicator light turns on. Switch the washer/dryer off by pressing the ON/OFF button.

Table of wash cycle

Starting the drying cycle
Turn the drying knob to select the desired drying option.

There are two options:

• Based on time: From 40 minutes to 150.
• Based on desired laundry dryness level

Drying only
Use the cycle selector knob to select a drying cycle (11-12-13) in accordance with the type of fabric. The desired drying level or time may also be set using the DRYING knob.

Table of drying times

Functions

The various wash functions available with this washer-dryer will help achieve the desired results, every time. To activate the functions:

1. Press the button corresponding to the desired function
2. The function is enabled when the corresponding indicator light is illuminated.

Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the selected wash cycle.

• EcoTime:
  Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled cotton and synthetic fabrics. EcoTime enables you to wash in less time thereby saving water and electricity.

• 1000-500: Press this button to reduce the spin speed

• Intensive wash: This function offers a high-performance wash using a greater quantity of water in the initial phase of the cycle.
  Delay timer : This timer delays the start of the wash cycle by up to 9 hours. Press the button repeatedly until the indicator light corresponding to the desired delay time switches on. The fifth time the button is pressed, the function will be disabled. Once the Start/Pause button has been pressed the delay time can only be modified by decreasing it until launching the set program.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>