MONSTER DNA ONE Portable Bluetooth Speaker User Manual
- June 10, 2024
- Monster
Table of Contents
MONSTER DNA ONE Portable Bluetooth Speaker
Product Information
- Product Name: Monster DNA ONE Wireless Speaker
- Package Includes: One wireless speaker, one Qi charger (not IP67), one USB cable (not IP67), and user manual
- Warranty: 2-year limited lifetime warranty
- Product Specs:
- Matte Black 350 gsm cardstock front and back
- Spot UV
- Cardstock Stickers with a matte finish to be placed inside the envelope
- Matte Finish Monster DNA ONE Manual to be placed inside the envelope
- Monster ShareTM, Party Mode: Connect up to 99 Monster DNA Speakers
- Charging: This Bluetooth device shall be charged by the supplied charging unit only, which has a USB Type-CTM charging port
- Safety Precautions: The batteries in this product are not replaceable. During use, storage or transportation the battery should not be subjected to extremely low temperatures, or low air pressure at high altitude. If the battery is exposed to extremely high temperatures, it could result in an explosion or the leaking of flammable liquid or gas. Please take care when disposing of the unit; disposal in a fire, oven, mechanically crushing or cutting machine could cause an explosion.
Product Usage Instructions
- To turn on the speaker for the first time, press and hold the Power button for around 2 seconds. The LED Ring will flash Blue in a clockwise motion, indicating that it is in pairing mode.
- Press and hold the Bluetooth Pairing button for 2 seconds to enter Bluetooth pairing mode.
- Press the Volume + / Next Track button once to increase the volume or skip to the next track. Press and hold for 2 seconds to skip to the next track.
- Press the Volume – / Previous Track button once to decrease the volume or go back to the previous track. Press and hold for 2 seconds to go back to the previous track.
- To answer a call, press the Power button once. To end a call, press the Power button again.
- To play or pause music, press the Power button once.
- To power the speaker on or off or reject a call, press and hold the Power button for 2 seconds.
- To use Monster ShareTM Party Mode, press and hold the Monster ShareTM Party Mode button for 2 seconds to set the transmitting speaker. Press once to set the receiving speakers. Connect up to 99 Monster DNA Speakers.
- To check the battery level, press and hold both the Volume + and Volume – buttons at the same time.
Note: If you experience any interference while using this device, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment into an outlet on a circuit different from that to which the receiver is connected, or consulting the dealer or an experienced radio/TV technician for help. Modifying or altering this product could void the user’s authority to operate it.
Envelope
- Matte Black 350 gsm cardstock front and back
- Spot UV
- Cardstock
Stickers
- Matte Finish
- Place Stickers Inside the Envelope
Package Includes
(1) Wireless Speaker, (1) Qi Charger (not IP67),
(1) USB Cable (not IP67), User Manual.
Warranty
Warranty: 2 Year Limited Lifetime Warranty
See more at monsterforever.com
2022 © The M Monster logo, the M Slice and Pure Monster Sound are trademarks
or registered trademarks that are used under license of Monster, Inc.
2022 © All rights reserved. USB Type-A™, USB Type-C™ and USB-C™ are trademarks
of USB Implementers Forum. Manufactured, marketed and distributed by Lifeworks
Technology Group LLC. under license. New York, NY 10018. All other trademarks
are property of their respective owners.
website: www.monsterforever.com
support: [email protected]
For French, Spanish and Portuguese instructions scan here: www.monsterforever.com
Information
This Bluetooth device shall be charged by the supplied charging unit only.
Caution: The batteries in this product are not replaceable. During use,
storage or transportation the battery should not be subjected to extremely low
temperatures, or low air pressure at high altitude. If the battery is exposed
to extremely high temperatures it could result in an explosion or the leaking
of flammable liquid or gas. Please take care when disposing of the unit;
disposal in a fire, oven, mechanically crushing or cutting machine could cause
an explosion.
Warning: Do not dispose of the unit in fire or water. Never attempt to
disassemble and reassemble. Waste electrical products should not be disposed
of with household waste, please recycle where facilities exist. Check with
your local authority for recycling advice. Keep your device and all
accessories out of the reach of children and animals. Small parts may cause
choking or serious injury if swallowed. Avoid exposing your device to very
cold or very hot temperatures (Below 0° or above 45° C). Extreme temperatures
can cause deforming of the device and reduce the charging capacity and life of
your device. Do not allow your device to get wet, liquids can cause serious
damage. Do not handle your device with wet hands.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth® SIG, Inc., iPhone, iPad and Mac is a trademark of Apple Inc.,
registered in the U.S. and other countries.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a wireless power charger, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Product Specs
- IP67-Rating: waterproof speaker, dust-proof, floats in water
- IP67-Rated speaker, speaker can float
- Bluetooth Range – 30ft
- Music sharing from speaker to multiple speakers – hardware button (no app required)
- USB Type-CTM Charging port
- QI Wireless charging receiving coil
- Battery Life: Up to 13 hours
- Charge time: 2.6 hours
- With hands free function
Speaker Function Operation
Power Button:
Press once:
answer call/end call/play/pause
Press and hold for 2s:
power on/off/call reject
Volume + / Next Track:
Press once:
volume up
Press and hold for 2s:
next track
Volume – / Previous Track:
Press once:
volume down
Press and hold for 2s:
previous track
Monster Share™, Party Mode:
Press and hold 2s to set transmitting speaker
Press once to set receiving speakers
Connect up to 99 Monster DNA Speakers
Bluetooth Pairing Button:
Press and hold for 2s : Bluetooth pairing
Charging Port(USB-C™)
Battery Level Indication
Press and hold “-” and “+” buttons
OVERVIEW
Function
Pairing – First time:
- Press and hold the Power button around 2s to turn on the speaker.
- When turning the speaker on for the first time, it will automatically be in pairing mode. The LED Ring will flash Blue in a clockwise motion.
- Activate your Bluetooth device and search for “Monster DNA ONE” speaker.
- Once the speaker is connected successfully, the LED Ring lights up blue for 3s, then turns off.
Pairing – Manually:
- After power is on, the speaker will attempt to connect to the last connected device.
- To pair another device, press and hold the Bluetooth Pairing Button for 2s. The LED Ring will flash Blue in a clockwise motion.
- Activate your Bluetooth device and search for “Monster DNA ONE” speaker.
- Short press Bluetooth Pairing button again to disconnect.
Bluetooth Mode:
- Press once: Volume +/- button for volume up/down
- Press and hold for 2s: Volume +/- button for next/previous track
- Press once: Power button to start music play/pause
- Press once: Power button to answer an incoming call or ending a call
- Press and hold for 2s: Power button to reject an incoming call
USB/Wireless Charging:
- To charge the speaker by USB-C, connect the included USB-C cable and plug it into a USB power source (such as the USB-C wall adapter provided). For wireless charging, connect the Wireless Charging Base to the wall adaptor and place the speaker directly on it.
- The LED Ring light will ‘breathe’ with a white glow while charging.
- Once fully charged, the LED Ring will show a white light for 5s, then turn off.
Charging Out:
- Connect your device(such as a smartphone) to the speaker’s Charging Port and charging will start automatically.
Monster Share™, Party Mode:
- Turn on all Monster DNA speakers you would like to connect by pressing and holding the Power button for 2s.
- Connect to one of the Monster DNA speakers by Bluetooth, and press and hold the ‘Monster Share™ Party Mode’ button for 2s to set this as the main transmitting speaker. A flashing purple light will appear indicating Party Mode transmission is in pairing mode.
- Single press the ‘Monster Share™ Party Mode’ button on all other speakers that you would like to set as receiving speakers. A green light will flash in a circle while pairing and will turn solid Green once paired.
- If speakers are not paired within 30s, ‘Monster Share™ Party Mode’ pairing will time out. Restart this process to connect additional speakers.
- Press the ‘Monster Share™ Party Mode’ button once again to exit Party Mode.
*Monster Share™ Party Mode works with compatible Monster Speakers enabled with Monster Share™ technology
Auto Power Off:
The speaker will turn off automatically in 15 minutes if no connection was
found or idling.
IC Warning
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.