Orange Factory 2024 Cross Legged Office Desk Chair Instruction Manual
- June 17, 2024
- Orange Factory
Table of Contents
Orange Factory 2024 Cross Legged Office Desk Chair
Product Information
This product is a chair designed for seating one person at a time. It comes with various components including a seat, backrest, control mechanism, base, gas lift cylinder, tilt bolt, seat bolt, and an allen key for assembly.
Specifications
- Seating Capacity: 1 person
- Components: Seat, backrest, control mechanism, base, gas lift cylinder, tilt bolt, seat bolt
- Assembly Tool: Allen key
Product Usage Instructions
Deodorizing the Fabric
To deodorize the fabric, place the chair in a shady area outside for 1-2
days. This will help remove any unwanted odors from the fabric.
Regular Maintenance
For longer use and to ensure the stability of the chair, it is recommended
to re-tighten bolts every 6 months. Use the enclosed allen key to tighten the
bolts manually. Do not use an electric drill as it may damage the chair.
Cautions
- Use this product only for seating one person at a time.
- Do not use the chair unless all bolts, screws, and knobs are tight.
- Do not use the chair if any components are missing or damaged.
- Do not stand on the chair or use it as a step stool or ladder.
- Regularly check all bolts, screws, and knobs to ensure they are tight.
- Be careful as some parts may have sharp edges and are heavy, which can cause serious injury.
To deodorize the fabric leave the chair in a shady outside for 1-2 days.
For longer use
- Re-tighten bolts every 6 months by using the enclosed allen-key.
- Using an electric drill can damage the chair. Please re-tighten bolts manually.
Cautions
If there are any problems, do not hesitate to e-mail us.
PARTS
Please make sure all the parts are included.
Missing parts?
MAIL:support@orangefactoryinc.com
INFORMATION
Read the instructions carefully.
Please follow the assembly steps.
INSTALLATION INSTRUCTION
- Insert the Gas Lift into the Base. NOTE: Make sure the “FRONT” direction of the Mechanism and Seat Cushion are the same.)
- Using the Allen key, attach Mechanism to the Seat with Bolt X4B.
- Align the screw holes on the Seat and Backrest. Using the Allen key, secure both completely with A Bolt X4.
- Align the hole on the Mechanism with the Gas Lift, and press the Chair down until it is fully secured.
FAQ
- Q: What should I do if there are missing parts?
- If there are missing parts, please contact our customer support at support@orangefactoryinc.com. They will assist you in resolving the issue.
- Q: How can I contact customer support?
- You can contact our customer support team at support@orangefactoryinc.com. We are here to assist you with any problems or inquiries.
- Q: How often should I re-tighten the bolts?
- It is recommended to re-tighten the bolts every 6 months to ensure the stability of the chair.
- Q: Can I use an electric drill to tighten the bolts?
- No, using an electric drill can damage the chair. Please re-tighten the bolts manually using the enclosed Allen key.
- Q: How long should I leave the chair outside to deodorize the fabric?
- Leave the chair in a shady area outside for 1-2 days to deodorize the fabric. This will help remove any unwanted odors.
Enjoy your new favorite chair
- Our goal is to create a perfect customer experience. Let us know if you have any feedback.
- Your comment motivates us to become a better team.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>