RAB RTLED1X4-19YNW/D10/MVS Retrofit Troffer User Manual

June 10, 2024
RAB

RAB RTLED1X4-19YNW/D10/MVS Retrofit Troffer

RAB-RTLED1X4-19YNW-D10-MVS-Retrofit-Troffer-PRODUCT

Product Information

The RTLED1X4-19YNW/D10/MVS is a cost-effective LED 1×4 troffer upgrade that can be easily installed. The troffer comes in white color and weighs 22.6 lbs.

Driver Info

  • Type: Constant Current
  • Input Voltage: 120V, 208V, 240V, 277V
  • Current: 0.16A (at 120V), 0.10A (at 208V), 0.09A (at 240V), 0.08A (at 277V)
  • Input Watts: 19.3W

LED Info

  • Watts: 19W
  • Color Temperature: 3500K (Warm Neutral)
  • Color Accuracy: 85 CRI
  • L70 Lifespan: 100,000 Hours
  • Lumens: 2,548
  • Efficacy: 132 lm/W

Technical Specifications

  • Compliance: UL Listed, Suitable for damp locations
  • Testing: IESNA LM-79 & LM-80 Testing
  • DLC Listed: This product is listed by Design Lights Consortium (DLC) as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities. DLC Product
  • Code: P59PXJ2C
  • Electrical : Constant Current, Class 2, 120-277V, 50/60 Hz, 120V: 0.16A, 0.10A, 0.09A, 0.08A, THD: 13.9% at 120V, 13% at 277V
  • Reflector: High-reflectance, powder-coated finish, optimized for uniform light distribution
  • Mounting: Recessed ceiling
  • Lens: Polycarbonate lens
  • Finish: Formulated for high durability and long-lasting color

Product Usage Instructions

The RTLED1X4-19YNW/D10/MVS is a troffer that can be used to upgrade your existing lighting system. Follow the instructions below to install and use the product:

  1. Turn off the power supply before installing the troffer.
  2. Remove the existing lighting fixture and disconnect any wiring.
  3. Install the troffer in the recessed ceiling.
  4. Connect the wiring according to the user manual.
  5. Turn on the power supply and test the new lighting system.
  6. Customize the detection area, time delay, cut-off period, dimming level, and daylight threshold using the sensor specifications provided in the user manual.

Note: The troffer is suitable for damp locations and is compliant with UL standards. It is tested according to IESNA LM-79 & LM-80 testing and is listed by DLC as an ultra-efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities.

RTLED1X4-19YNW/D10/MVS

Cost-effective LED 1×4 troffer upgrade that’s easily installed.
Color: White
Weight: 22.6 lbs

Driver Info

  • Type Constant Current
  • 120V 0.16A
  • 208V 0.10A
  • 240V 0.09A
  • 277V 0.08A
  • Input Watts 19.3W

LED Info

  • Watts 19W
  • Color Temp 3500K (Warm Neutral)
  • Color Accuracy 85 CRI
  • L70 Lifespan 100,000 Hours
  • Lumens 2,548
  • Efficacy 132 lm/W

Technical Specifications

Compliance

  • UL Listed:
    Suitable for damp locations

  • IESNA LM-79 & LM-80 Testing:
    RAB LED luminaires have been tested by an independent laboratory in accordance with IESNA LM-79 and LM-80

  • DLC Listed:
    This product is listed by Design Lights Consortium (DLC) as an ultra- efficient premium product that qualifies for the highest tier of rebates from DLC Member Utilities. DLC Product Code: P59PXJ2C Electrical

  • Driver:
    Constant Current, Class 2, 120-277V, 50/60 Hz, 120V: 0.16A, 0.10A, 0.09A, 0.08A

  • THD:
    13.9% at 120V, 13% at 277V

  • Power Factor:
    98.3% at 120V, 88.9% at 277V

  • Surge Protection:
    4kV
    Note: All values are typical (tolerance +/- 10%)

Construction

  • Housing:
    Steel sheet metal

  • Ambient Temperature:
    Suitable for use in up to 40°C (104°F)

  • Reflector:
    High-reflectance, powder-coated finish, optimized for uniform light distribution

  • Mounting:
    Recessed ceiling

  • Lens:
    Polycarbonate lens

  • Finish :
    Formulated for high durability and long-lasting color

Construction

  • Green Technology:
    Mercury and UV free. RoHS-compliant components.

LED Characteristics

  • LEDs:
    Long-life, high-efficacy, surface-mount LEDs

  • Color Stability:
    LED color temperature is warrantied to shift no more than 200K in color temperature over a 5-year period

  • Color Uniformity:
    RAB’s range of Correlated Color Temperature follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2017.

Performance

  • Lifespan:
    100,000-Hour LED lifespan based on IES LM-80 results and TM-21 calculations

Sensor Specifications

  • Capacitance Load:
    400VA at 120VAC, 800VA at 230VAC, 1000VA at 277VAC

  • Operating Temperature:
    -20°C to +60°C (-4°F to +140°F)

  • Relay :
    Zero-cross relay

  • Maximum Mounting Height:
    16.4 feet

  • Customizable Detection Area:
    10, 50, 75 or 100%

  • Time Delay:
    5s, 30s, 1min, 5min, 10min, 20min, 30min

  • Cut Off Period:
    0s, 10s, 1min, 5min, 10min, 30min, 1hr, Bi-Level

  • Cut-Off Dimming level:
    10, 20, 30, 50%

  • Cut-Off Power:
    Less than 1W

  • Daylight Threshold:
    About .2-5 fc for disabled

  • Sensor Principle:
    High Frequency

  • Microwave Frequency:
    5.8GHz +/- 75MHz

  • Microwave Power:
    <0.2mW

  • Max Detection Range:
    26 ft. diameter at 16 ft. mounting height

  • Detection Angle:
    About 30 to 150 degrees

  • Remote Control:
    Adjust settings using remote control (catalog# MVSREM). Only available with 0-10V dimming driver options. Remote control available here.
    Other

Warranty

RAB warrants that our LED products will be free from defects in materials and workmanship for a period of five (5) years from the date of delivery to the end user, including coverage of light output, color stability, driver performance and fixture finish. RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty.

Equivalency
Equivalent to (1) F17T8 or (1) F24T5
Buy American Act Compliance:
RAB values USA manufacturing! Upon request, RAB may be able to manufacture this product to be compliant with the Buy American Act (BAA). Please contact customer service to request a quote for the product to be made BAA compliant.

Dimensions

Features

Troffer Retrofit can be installed in under 3 minutes by 1 person
Frosted polycarbonate lens provides a uniform distribution and reduces glare
0-10V dimming standard
5-Year, No-Compromise Warranty

**Ordering Matrix

RAB-RTLED1X4-19YNW-D10-MVS-Retrofit-Troffer-
FIG-2**

Need help? Tech help line: 888-722-1000 Email: sales@rablighting.com Website: www.rablighting.com
Copyright © 2021 RAB Lighting All Rights Reserved Note: Specifications are subject to change at any time without notice

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals